去皮柚木方木
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4407230100 | 35.0% | CN | US | Official Doc |
| 4407290296 | 35.0% | CN | US | Official Doc |
AI Analysis
🌳 Stripped Teak Timber (Peeling/Slicing/Wood of Tropical Wood: Teak)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy for US Imports 📌 I. Product Definition & Classification: What Exactly is "Stripped Teak Timber"?
Stripped Teak Timber refers to wood from the Tectona grandis tree (Teak), processed by peeling, slicing, or chipping lengthwise. It is a raw material used in high-end furniture making, veneer production, flooring, and marquetry.
In international trade, it is strictly categorized under Chapter 44 (Wood and Wood Articles), specifically focusing on wood sawn, chipped, sliced, or peeled, exceeding 6mm in thickness.
⚠️ Key Distinction Points: - Teak (柚木): Must be genuine Tectona grandis. Mislabeling other tropical woods as Teak to avoid specific scrutiny is risky. - Thickness > 6mm: If thickness ≤ 6mm, it falls under different chapters (usually 44.08 for veneers or 44.09 for continuous fibers). This guide assumes standard timber/lumber dimensions. - Processing Level: "Peled/Sliced/Chipped" implies mechanical removal of bark or shaping. It is not charcoal, nor is it fully manufactured furniture.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided DATA, there are two primary classifications depending on the exact finish and commercial specification of the teak logs/planks.
| HS Code | Product Description | Applicable Scenario | Tax Rate (Total) |
|---|---|---|---|
4407.23.01.00 |
Wood... of tropical wood: Teak (Specifically identified as Teak) |
Standard teak planks, beams, or squared timber, peeled/sliced, >6mm thick. | 25.0% |
4407.29.02.96 |
Wood... of tropical wood: Other Other (Other tropical wood or non-specific classification) |
Wood from other tropical species, OR Teak that does not meet the specific "Teak" subheading criteria in certain trade contexts (e.g., specific veneer stock not covered by 4407.23). | 25.0% |
🔍 Critical Note: - Both codes listed in your data carry a 25.0% total tax. -
4407.23.01.00is the precise classification for Genuine Teak. -4407.29.02.96is a "catch-all" for tropical woods other than Teak (or where Teak specifics are not declared/verified). - Why the confusion? In some trade data contexts, if the wood is not declared explicitly as "Teak" but as "Tropical Wood," it may fall into4407.29. However, for Genuine Teak,4407.23.01.00is the correct, specific code.
💰 III. 2026 Latest Tariff Rate Detail (Including Additional Taxes)
✅ Applicable Country: United States (US) ✅ Origin: China (CN) (Assumed based on typical trade flow for this data format; adjust if origin differs) ✅ Effective Time: Current US Trade Policy (Section 301 & Base Rates)
🎯 1. 4407.23.01.00 —— Genuine Teak Timber
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Most Favored Nation rate for wood products often starts at 0%, but see below) |
| Section 301 Additional Tariff | +25.0% (Under USITC Footnote 9903.88.01 / Section 301 List 4B) |
| Total Effective Rate | 25.0% |
| Tax Calculation | CIF Value × 25% |
| De Minimis Exemption? | ❌ NO (Wood products are generally excluded from Section 321 de minimis relief if subject to Section 301) |
| Legal Basis Path | HTSUS:4407.23.01.00 → USITC:9903.88.01 (Section 301) |
📌 Explanation: - While the base MFN tariff for wood sawn timber is often 0%, the 25% Section 301 tariff applies to most Chinese-origin wood products, including Teak, to protect domestic timber industries and address trade deficits. - No preferential rate applies unless the wood is sourced from a country with a Free Trade Agreement (FTA) that exempts wood, but Teak is primarily tropical (e.g., Indonesia, India, Africa), not typically FTA partners with the US in this context.
🎯 2. 4407.29.02.96 —— Other Tropical Wood
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Tariff | +25.0% (Same as above, applies to most Chapter 44 products from China) |
| Total Effective Rate | 25.0% |
| Tax Calculation | CIF Value × 25% |
| De Minimis Exemption? | ❌ NO |
| Legal Basis Path | HTSUS:4407.29.02.96 → USITC:9903.88.01 (Section 301) |
📌 Note: - Even if classified as "Other Tropical Wood," the 25% surcharge remains identical. - The distinction between
4407.23(Teak) and4407.29(Other) is primarily for statistics, quota monitoring (if any), and regulatory compliance (e.g., Lacey Act) rather than tariff difference in this specific dataset.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Preparation Checklist (Essential Documents)
| Document | Required? | Purpose |
|---|---|---|
| ✅ Species Verification | ✔️ | Certificate of Identity (COI) proving the wood is Tectona grandis (Teak). Crucial to avoid misclassification. |
| ✅ Lacey Act Declaration | ✔️ | Mandatory for US import. Must declare species, country of harvest, and value. Teak is high-risk for mislabeling. |
| ✅ Commercial Invoice | ✔️ | Must state: "Wood, Sliced/Pealed, Thickness >6mm, Species: Teak, Country of Origin: [e.g., Indonesia/Myanmar]". |
| ✅ Packing List | ✔️ | Include dimensions, weight, and volume (CBM). |
| ✅ Phytosanitary Certificate | ✔️ | Issued by the exporting country's plant quarantine agency. Proves wood is free of pests. |
| ✅ Fumigation Certificate | ✔️ | If wood is untreated, fumigation is often required. |
🚨 Warning: Misdeclaring "Tropical Wood" as generic "Hardwood" to avoid Lacey Act scrutiny will result in seizure, fines, and detention.
✅ 2. Declaration Tips (Key Mantras)
🔥 “Species Must Be Precise, Lacey Declaration Mandatory, Thickness Check is Key!”
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Genuine Teak | 4407.23.01.00 "Teak, Sawn, >6mm" |
Misdeclare as 4407.99 (Other wood) to avoid scrutiny → High Risk of Audit & Fine |
| Veneer Sheets (≤6mm) | 4408.39 (Not in DATA) |
Declare as 4407 → Classification Error |
| Teak Logs (Unprocessed) | 4403.49 (Not in DATA) |
Declare as 4407 (Sawn) → Incorrect Processing Level |
| Mixed Tropical Woods | 4407.29.02.96 |
Declare as "Teak" when it contains other species → Fraud |
✅ 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| Teak from Non-Traditional Origins (e.g., Hawaii, Africa) | Ensure Lacey Act declaration is accurate. Some regions have stricter export bans. |
| Teak Veneer (Thin Sheets) | If thickness ≤ 6mm, it is NOT 4407. It falls under 4408 (Veneers). Check thickness carefully! |
| Processed Teak (e.g., Flooring) | If planed/sanded into finished profiles, it may move to 4409 (Continuously shaped). Ensure description matches "sawn/peeled" vs. "shaped". |
| Anti-Dumping/Countervailing Duties | Generally not applied to raw Teak, but verify if specific countries of origin are under investigation. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4407.23.01.00 |
25.0% (Section 301) | Lacey Act, Phytosanitary | High scrutiny on Teak origin. |
| 🇨🇳 China | 4407.23.01.00 |
5-10% (Import) | Phytosanitary | Major importer of raw Teak. |
| 🇪🇺 EU | 4407.23.00 |
0% (If FLEGT licensed) | EUTR, FLEGT | Strict due diligence required. |
| 🇬🇧 UK | 4407.23.00 |
0% (If CITES compliant) | UK Forestry Standard | Post-Brexit rules apply. |
| 🇯🇵 Japan | 4407.23.00 |
0-3% | Phytosanitary | Generally low tariffs. |
📌 Conclusion: - USA: 25% tariff is the dominant cost driver. Lacey Act compliance is the biggest operational hurdle. - EU/UK: Zero tariff is possible, but Due Diligence (proving legality) is critical. Non-compliance leads to product confiscation.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring "Teak" without Lacey Act Declaration 👉 Consequence: Shipment held at customs, fines up to $10,000+ per violation, potential criminal liability.
❌ Error 2: Misdeclaring "Tropical Wood" to avoid "Teak" classification 👉 Consequence: Customs audit reveals species mismatch → 25% tariff still applies + penalties + back taxes.
❌ Error 3: Ignoring Thickness (>6mm rule)
👉 Consequence: If <6mm, code 4407 is wrong. Misclassification leads to delayed clearance.
❌ Error 4: Using "Veneer" label for thick planks
👉 Consequence: Customs may reclassify as 4408 (if thin) or 4407 (if thick), causing tariff discrepancies.
✅ Correct Practice:
"Teak (Tectona grandis), Sawn & Peeled, Thickness 20mm, Fumigated, Lacey Act Declared, Origin: Indonesia"
🎯 VII. Conclusion: Precise Classification, Smooth Clearance
🎯 Remember the Mantras:
🔹 "Teak is 25% in the US, Lacey Act is Mandatory!" 🔹 "Check Thickness: >6mm is 4407, ≤6mm is 4408!"
"Don't Guess the Species, Certify it or Risk It!"
📌 Pro Tip:
If you are importing from Indonesia, ensure you have a V-Legal license (Voluntary Legality Verification System). For Myanmar, be extremely cautious due to ongoing trade restrictions and sanctions. Always request a Pre-Shipment Inspection Report to verify species and treatment before loading.
📣 Immediate Action:
📞 Contact a licensed customs broker before shipment. 📄 Prepare Lacey Act Declaration template. 📦 Verify Phytosanitary Certificate validity. 🚀 Ensure your Teak clears customs without detention!
✨ Professional Customs Clearance Starts with Accurate Classification! 💼 Your Profit Margin Depends on Tariff Accuracy and Compliance Efficiency!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.