吊货网
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7314200000 | 85.0% | CN | US | Official Doc |
| 7314390000 | 85.0% | CN | US | Official Doc |
Product Images
AI Analysis
🪢 Lifting Nets (Cargo Sling Nets / Demountable Load Units)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Level Clearance Strategy
📌 1. Product Definition and Classification: Do You Really Understand “Lifting Nets”?
Lifting nets, also known as cargo sling nets, demountable load units, or iron/steel wire mesh nets, are critical lifting accessories used in ports, warehouses, and construction sites to safely handle bulk materials, loose items, or irregularly shaped goods. In international trade, they are primarily classified under Chapter 73 (Articles of Iron or Steel) due to their material composition.
The classification hinges on two critical technical parameters: 1. Wire Cross-Sectional Dimension: Is the wire thicker or thinner than 3 mm? 2. Mesh Size: Is the opening area equal to or larger than 100 cm²?
⚠️ Key Distinction Point:
- If the net is welded at intersections AND has a wire thickness ≥ 3 mm AND a mesh size ≥ 100 cm² → Classify under 7314.20.00.00
- If the net is welded at intersections BUT does NOT meet the above size/thickness criteria (e.g., finer mesh or thinner wire) → Classify under 7314.39.00.00
📦 2. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Wire Thickness & Mesh Size Criteria |
|---|---|---|---|
7314.20.00.00 |
Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more | Heavy-duty lifting nets, large-mesh cargo nets for bulk goods (gravel, ore), industrial fencing | ✅ ≥ 3 mm wire AND ≥ 100 cm² mesh |
7314.39.00.00 |
Other grill, netting and fencing, welded at the intersection: Other | Fine-mesh lifting nets, smaller industrial grills, nets with wire < 3 mm or mesh < 100 cm² | ❌ < 3 mm wire OR < 100 cm² mesh |
🔍 Important Reminder:
- The term "Lifting Net" is not a standalone HS code; it must be described by its physical characteristics (wire thickness and mesh size). - If the net is not welded (e.g., twisted or knotted), it would fall under different subheadings (7314.10 or 7314.31), but the provided data only covers welded nets. - Do not misclassify a heavy-duty lifting net as "other" if it meets the 3mm/100cm² criteria, as this affects tax rates.
💰 3. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: Current applicable rates as per provided data
🎯 1. 7314.20.00.00 — Heavy-Duty Welded Steel Net (Wire ≥ 3mm, Mesh ≥ 100cm²)
| Item | Content |
|---|---|
| Basic Tariff Rate | 0.0% (ad valorem) |
| Section 301 / Surtax | 0.0% (Base surtax for this specific subheading is 0%) |
| Steel, Aluminum, Copper Products Surtax | +50.0% (Specific surtax for steel wire products) |
| Total Tax Rate | 50.0% |
| Tax Calculation | CIF Value × 50% |
| De Minimis Exemption Eligible? | ❌ No (High tariff rates generally exclude de minimis) |
| Legal Basis Path | USITC:7314.20.00.00 → Surtax: Steel/Copper/Aluminum 50% |
📌 Explanation:
- The 50% surtax is applied specifically to steel wire products under current trade restrictions. - Despite a 0% basic tariff, the 50% surcharge makes this a high-cost item. - This applies to large-mesh, thick-wire lifting nets commonly used in heavy industry.
🎯 2. 7314.39.00.00 — Other Welded Steel Nets (Fine Mesh or Thin Wire)
| Item | Content |
|---|---|
| Basic Tariff Rate | 0.0% (ad valorem) |
| Section 301 / Surtax | +25.0% (General Section 301 surtax) |
| Steel, Aluminum, Copper Products Surtax | +50.0% (Specific surtax for steel wire products) |
| Total Tax Rate | 75.0% |
| Tax Calculation | CIF Value × 75% |
| De Minimis Exemption Eligible? | ❌ No |
| Legal Basis Path | USITC:7314.39.00.00 → Surtax: Steel/Copper/Aluminum 50% + Surtax: 301 25% |
📌 Note:
- This classification applies to finer or smaller nets that do not meet the 3mm/100cm² threshold. - The 75% total rate is significantly higher than Category 1, due to the additional 25% general surtax on top of the 50% steel surtax. - Critical Warning: Misclassifying a fine-mesh net as Category 1 to save 25% is a major compliance risk and can lead to penalties.
🛠️ 4. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
✅ 1. Required Documentation Checklist (All Required)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specifications | ✔️ | Must explicitly state wire diameter (mm) and mesh size (cm² or inches) |
| ✅ Technical Drawings | ✔️ | Show welding points, intersection method, and load capacity |
| ✅ Product Photos | ✔️ | Clear shots of mesh structure, labels, and lifting hooks (if attached) |
| ✅ Commercial Invoice | ✔️ | Describe as "Welded Steel Wire Lifting Net" with precise dimensions |
| ✅ Packing List | ✔️ | Detail quantity, weight, and packaging type |
| ✅ Origin Certificate (CO) | ✔️ | Required for proving Country of Origin (China) |
| ✅ Test Report | ✔️ | Proof of tensile strength and welding integrity (if requested) |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Measure the Wire, Measure the Mesh, Welded? Yes. Then Pick the Right Code!”
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| Thick wire (≥3mm) + Large mesh (≥100cm²) | 7314.20.00.00 (50% Tax) |
Misclassifying as 7314.39.00.00 → 75% Tax (Overpay) |
| Thin wire (<3mm) OR Small mesh (<100cm²) | 7314.39.00.00 (75% Tax) |
Misclassifying as 7314.20.00.00 → 50% Tax (Underpay, Audit Risk) |
| Twisted/Woven Net (Not Welded) | Not in provided data (Likely 7314.10/7314.31) | Declaring as Welded → Classification Error |
| Net with Hooks/Slings Attached | Declare as Demountable Load Unit or Lifting Accessory | Declaring as "Steel Wire" → Potential Misclassification |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Custom-Made Nets | Provide customer specs + drawing. Ensure wire thickness is explicitly stated. |
| Stainless Steel Nets | May fall under Chapter 73 but check if specific stainless steel subheadings apply (not covered in current data). |
| Non-Welded Nets | Do NOT use 7314.20 or 7314.39. Use appropriate woven/knotted subheadings (e.g., 7314.10, 7314.31). |
| Lifting Accessories with Plastic Coating | Still classified under Chapter 73 if steel is the essential character. |
🌍 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Requirements | Remarks |
|---|---|---|---|---|
| 🇺🇸 USA | 7314.20.00.00 or 7314.39.00.00 |
50% / 75% | None specific, but proof of steel origin required | High Tariff Environment due to steel surtax |
| 🇨🇳 China | 7314.20.00.00 or 7314.39.00.00 |
5% - 10% | CCC (if applicable) | Lower export/import burden |
| 🇪🇺 EU | 7314.20 or 7314.39 |
0% - 6% | CE (if machinery accessory) | No steel surtax in EU |
| 🇦🇺 Australia | 7314.20 or 7314.39 |
5% | RCM (if electrical component attached) | Moderate tariffs |
| 🇯🇵 Japan | 7314.20 or 7314.39 |
0% - 8% | JIS Standards | Competitive market |
📌 Conclusion:
- The USA has the highest tariff burden on steel wire products, especially for lifting nets. - Tariff difference of 25% between the two subheadings is significant. Accurate measurement is crucial. - Consider supply chain diversification (e.g., manufacturing in Vietnam or Mexico) if targeting the US market to mitigate 50%-75% tariffs.
📌 6. Common Mistakes & Pitfall Guide (Lessons from Experience)
❌ Mistake 1: Ignoring wire thickness and mesh size
👉 Consequence: Misclassification between 50% and 75% tax rates → Audit & Penalties
❌ Mistake 2: Declaring "Lifting Net" without specifying "Welded"
👉 Consequence: If not welded, the code is wrong → Clearance Delay or Return
❌ Mistake 3: Assuming all steel nets are the same
👉 Consequence: Using one code for both fine and coarse nets → Underpayment/Overpayment
❌ Mistake 4: Not providing technical drawings
👉 Consequence: Customs cannot verify wire diameter → Detention for Inspection
✅ Correct Practice:
“Welded Steel Wire Lifting Net, Wire Diameter: 4.0mm, Mesh Size: 150 cm², Load Capacity: 2 Tons, Model: LIFT-2T, Origin: China”
🎯 7. Conclusion: Precision in Classification Saves Costs!
🎯 Remember the Mantra:
🔹 “Wire ≥ 3mm? Mesh ≥ 100cm²? → 50% Tax”
🔹 “Else? → 75% Tax”
🔹 “Welded? Yes. Steel? Yes. Then Check the Numbers!”
🔹 “HS Code determines cost. 25% difference is huge. Declare correctly!”
📌 Pro Tip:
If your lifting nets are originally from Vietnam, Mexico, Thailand, or Malaysia, you may qualify for reduced or zero tariffs in the US due to trade agreements (e.g., USMCA, GSP).
Recommend applying for an Advance Ruling to confirm the HS Code and tariff rate before shipment.
📣 Immediate Action:
📞 Contact a professional customs broker + Provide Wire Diameter & Mesh Size + Apply for HS Code Advance Ruling
🚀 Ensure your lifting nets clear customs smoothly, efficiently, and at the lowest possible cost!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every cent of your cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.