含无机成分的农用增效剂
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3105900050 | 35.0% | CN | US | Official Doc |
| 2833115010 | 35.4% | CN | US | Official Doc |
| 3808997000 | 40.0% | CN | US | Official Doc |
| 3808923000 | 40.0% | CN | US | Official Doc |
| 2833115050 | 35.4% | CN | US | Official Doc |
Product Images
AI Analysis
🌾 Inorganic Agricultural Enhancers / Anti-Mold Agents (含无机成分的农用防霉/增效剂)
🌐 HS Code Reference & Clearance Guide | 2026最新税则全解析 | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Inorganic Agricultural Enhancers"?
Inorganic Agricultural Enhancers (含无机成分的农用防霉剂) are specialized chemical additives used in agriculture to prevent mold, fungal growth, or to enhance soil and crop health. They rely on inorganic salts (such as sulfates, aluminates, or other mineral compounds) rather than organic biocides.
In international trade, these products face high tariff volatility due to their dual nature: they can be classified as either Fertilizers (if viewed as soil amendments) or Pesticides/Biocides (if viewed as anti-mold agents).
⚠️ Critical Classification Distinction:
- Scenario A (Soil Amendment): If the product is primarily viewed as a mineral supplement for soil/crops → Chapter 31 (Fertilizers)
- Scenario B (Anti-Mold/Biocide): If the product is primarily a chemical杀菌/anti-mold agent → Chapter 38 (Chemical Products)
- Scenario C (Specific Inorganic Salts): If the product is a raw inorganic salt (e.g., specific sulfate) not primarily for agriculture but sold for the sector → Chapter 28 (Inorganic Chemicals)
📦 II. HS Code Classification Details (2026 Latest Tariff Concordance)
Based on the product characteristics "Inorganic Agricultural Enhancer," here are the 5 specific HS Codes derived from the provided data:
| HS Code | Classification Logic | Primary Category | Material Basis |
|---|---|---|---|
3105.90.00.50 |
Fertilizer Class | Fertilizers | Contains inorganic matter; fits mineral/chemical composition. |
2833.11.50.10 |
Inorganic Salt | Chemicals | Specifically categorized as Sulfates/Aluminum Salts. |
3808.99.70.00 |
General Biocide | Sterilizer | Fits material & usage requirements for sterilization/anti-mold. |
3808.92.30.00 |
Fungicide | Anti-Fungal | Material and function match Anti-Fungal properties perfectly. |
2833.11.50.50 |
Other Inorganic Salts | Chemicals | Fits general "Other Inorganic Salts" classification by inference. |
🔍 Key Insight:
- The Fungicide/General Biocide codes (3808...) usually carry higher base tariffs (5%) but are functionally precise for "Anti-Mold."
- The Fertilizer/Salt codes (3105...,2833...) often have lower base tariffs (0%~0.4%) but face heavy additional tariffs (25% + 10%).
- Crucial Note: All 5 codes face a Total Tax Rate between 35.0% and 40.0% due to the "Add-on Tariffs" (25% + 10%).
💰 III. 2026 Latest Tariff Rate Breakdown (Including Add-ons & Policy Surcharges)
✅ Applicable Country: USA (US)
✅ Origin: China (CN)
✅ Effective Date: 2025-11-10 onwards
🎯 1. 3105.90.00.50 — Agricultural Fertilizer (Inorganic)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Add-on | +25.0% |
| 122 Clause Add-on | +10.0% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ NO (Denied) |
| Legal Path | Base: 3105 → Add-on: 301/25 → Add-on: 122/10 |
📌 Explanation:
- Classified as a Fertilizer, base duty is free, but the 25% Section 301 and 10% Section 122 tariffs stack up, making the total 35%.
🎯 2. 2833.11.50.10 — Sulfates/Aluminum Salts
| Item | Content |
|---|---|
| Base Tariff | 0.4% |
| Section 301 Add-on | +25.0% |
| 122 Clause Add-on | +10.0% |
| Total Tax Rate | 35.4% |
| Tax Calculation | CIF Value × 35.4% |
| De Minimis Exemption | ❌ NO |
| Legal Path | Base: 2833 → Add-on: 301/25 → Add-on: 122/10 |
📌 Explanation:
- Since this is a specific Inorganic Salt, the base tariff is slightly higher (0.4%), resulting in a total of 35.4%.
🎯 3. 3808.99.70.00 — Sterilizer / General Anti-Mold
| Item | Content |
|---|---|
| Base Tariff | 5.0% |
| Section 301 Add-on | +25.0% |
| 122 Clause Add-on | +10.0% |
| Total Tax Rate | 40.0% |
| Tax Calculation | CIF Value × 40.0% |
| De Minimis Exemption | ❌ NO |
| Legal Path | Base: 3808 → Add-on: 301/25 → Add-on: 122/10 |
📌 Explanation:
- Highest Tariff! As a Biocide/Sterilizer, the base duty is 5%. Combined with add-ons, this hits 40%.
🎯 4. 3808.92.30.00 — Fungicide (Anti-Fungal)
| Item | Content |
|---|---|
| Base Tariff | 5.0% |
| Section 301 Add-on | +25.0% |
| 122 Clause Add-on | +10.0% |
| Total Tax Rate | 40.0% |
| Tax Calculation | CIF Value × 40.0% |
| De Minimis Exemption | ❌ NO |
| Legal Path | Base: 3808 → Add-on: 301/25 → Add-on: 122/10 |
📌 Explanation:
- Functionally Specific: If the product is explicitly labeled as a "Fungicide", it falls here. Like the general biocide, the Total Rate is 40%.
🎯 5. 2833.11.50.50 — Other Inorganic Salts
| Item | Content |
|---|---|
| Base Tariff | 0.4% |
| Section 301 Add-on | +25.0% |
| 122 Clause Add-on | +10.0% |
| Total Tax Rate | 35.4% |
| Tax Calculation | CIF Value × 35.4% |
| De Minimis Exemption | ❌ NO |
| Legal Path | Base: 2833 → Add-on: 301/25 → Add-on: 122/10 |
📌 Explanation:
- A fallback category for inorganic salts. Matches2833.11.50.10in rate (35.4%).
🛠️ IV. Practical Clearance Suggestions (Real-world Pitfall Avoidance)
✅ 1. Material Declaration Strategy (The "Inorganic" Trap)
| Material Description | Recommended HS Code | Risk Level | Reason |
|---|---|---|---|
| "Agricultural Fertilizer Additive" | 3105.90.00.50 |
⚠️ Medium | Good for base rate (0%), but must prove "Fertilizer" intent. |
| "Specific Sulfate/Alum Compound" | 2833.11.50.10/50 |
⚠️ Medium | Safe if chemical formula matches exactly. |
| "Anti-Mold Agent / Sterilizer" | 3808.99.70.00 |
✅ Recommended | Most accurate for "Anti-Mold" function, despite higher base tax. |
| "Fungicide / Anti-Fungal" | 3808.92.30.00 |
✅ Recommended | Best match if the product kills mold/fungus. |
💡 Pro Tip:
- Do NOT claim "Fertilizer" (3105) if the product is primarily marketed as a "Mold Preventer". Customs may reclassify to3808, leading to penalties.
- Do NOT claim "Fungicide" (3808) if the product is a generic mineral salt without anti-fungal claims. It should go to2833.
✅ 2. Tax Clause Detail Explanation (Why is it so high?)
🔥 The "35% - 40%" Trap:
- Base Tariff (0% ~ 5%): Low, often free.
- Section 301 Tariff (25%): The "China Specific" penalty tariff. Mandatory.
- Section 122 Tariff (10%): Additional "National Security/Emergency" surcharge. Mandatory.
- Total: 35.0% to 40.0%.
- Result: Even if the base tax is 0%, your cost jumps by 35% immediately.
✅ 3. Documentation Checklist (Non-Negotiable)
| Document | Requirement | Why? |
|---|---|---|
| Safety Data Sheet (SDS) | Must list "Inorganic Components" | To prove it's not an organic pesticide (which might have different rules). |
| Product Function Statement | Explicitly state "Anti-Mold" or "Fungicide" | Determines if you use 3808 (Fungicide) vs 3105 (Fertilizer). |
| Chemical Composition Report | % of Sulfates/Aluminates | Needed to justify 2833 vs 3808. |
| Labeling (English) | Must clearly say "Agricultural Enhancer" or "Fungicide" | Prevents misclassification as "General Chemical." |
📌 V. Common Mistakes & How to Avoid Them
❌ Mistake 1: Misleading "Fertilizer" Claim
👉 Error: Calling an anti-mold agent a "Fertilizer" to get 0% base tax.
👉 Consequence: Customs reclassifies to 3808 (40%) + Penalty for Misdeclaration.
❌ Mistake 2: Ignoring Section 122
👉 Error: Calculating only the 25% add-on.
👉 Consequence: Unexpected 10% extra cost (Total 35-40%), destroying profit margins.
❌ Mistake 3: Vague Product Name
👉 Error: "Agricultural Chemical" or "Additive".
👉 Consequence: Customs holds shipment for manual inspection → Delays + Storage Fees.
✅ Correct Action:
"Inorganic Anti-Mold Agent for Agricultural Use, Contains Sulfates, Function: Fungicide, Origin: China."
HS Code:3808.92.30.00(or3808.99.70.00) → Total Tax: 40.0%.
🌍 VI. Global Market Comparison (2026)
| Country | Recommended HS Code | Total Tax (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 3808.92.30.00 / 3105.90.00.50 |
35.0% - 40.0% | High Tax. Add-ons (25% + 10%) are mandatory. |
| 🇪🇺 EU | 3808.92.30.00 |
~6.5% | No Section 301/122. Base tax ~5-6%. |
| 🇨🇳 China | 3808.92.30.00 |
~10-14% | Domestic import tax. |
| 🇦🇺 Australia | 3808.92.30.00 |
~5% | Generally lower than US. |
📌 Conclusion:
- USA is the most expensive market for this product due to Section 301 + 122 stacking.
- If possible, consider re-packaging or sourcing from third-party countries (e.g., Vietnam) to avoid Chinese-origin add-ons, if applicable.
🎯 VII. Final Verdict & Action Plan
🎯 Remember:
🔹 "Inorganic = High Tax (35-40%) in USA!"
🔹 "Function First: If it kills mold, it's3808(40%). If it feeds soil, it's3105(35%)."
🔹 "Don't let 'Base Tax 0%' fool you; the 35% Total is the real cost!"
📌 Smart Clearance Tip:
If you are an agricultural supplier to the US:
1. Pre-verify the exact chemical composition (Sulfates vs. General Salts).
2. Apply for Ruling (Ruling Request) from CBP to confirm the correct 3105 vs 3808 code.
3. Factor 40% into your pricing immediately. Do not use 0% or 5% for budgeting.
✨ Professional Clearance Starts with Precise Classification!
💼 Every percentage point matters. Avoid the 40% trap!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.