墙板卡扣
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326190080 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3926908500 | 24.0% | CN | US | Official Doc |
| 8308206000 | 35.0% | CN | US | Official Doc |
AI Analysis
🔗 Wall Panel Clips (Clips for Wall Panels)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional-Level Compliance Strategy
📌 Part I: Product Definition & Classification: Do You Really Understand "Wall Panel Clips"?
Wall panel clips are essential hardware components used to secure wall panels (wood, metal, PVC, composite) to studs or frames. In international trade, their classification depends heavily on material composition (Plastic vs. Metal) and function (Fastener vs. General Hardware).
Because the prompt "Wall Panel Clip" is ambiguous regarding material, customs authorities require precise identification. Based on the provided data, we have identified four primary classification pathways:
⚠️ Key Distinction Points:
- If the clip is made of Plastic → Classified under Chapter 39 (Plastics)
- If the clip is made of Metal (Steel/Iron) → Classified under Chapter 73 (Iron/Steel) or Chapter 83 (Base Metal Accessories)
- Do not assume the material; physical inspection or product specs are required.
📦 Part II: HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Material Inference | Application Scenario | Tax Implication (Total) |
|---|---|---|---|---|
7326.19.00.80 |
Other articles of iron or steel, parts thereof | Metal (Steel/Iron) | General metal fasteners, non-specified steel parts | 87.9% |
7326.90.86.88 |
Other articles of iron or steel, parts thereof | Metal (Iron/Steel) | Specific metal parts for industrial use | 87.9% |
3926.90.99.89 |
Other articles of plastic | Plastic | Plastic wall anchors, PVC clips, non-specialized plastic parts | 22.8% |
3926.90.85.00 |
Other articles of plastic, clamping fasteners | Plastic | Plastic clips specifically defined as "clamping fasteners" | 24.0% |
8308.20.60.00 |
Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets, etc., of base metal | Metal | Metal clasps, hooks, or specific "buckle-type" fasteners | 35.0% |
🔍 Critical Reminder:
- Plastic clips are significantly cheaper in duties (~23-24%) compared to metal clips (35-88%). - Metal clips face high "Section 301" and "122 Clause" tariffs if from China. - Misclassifying a plastic clip as metal (or vice versa) can lead to massive tax discrepancies or customs penalties.
💰 Part III: 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current tariffs apply (Note: Specific Section 301/IEEPA rates vary by exact HS code footnote)
🎯 1. 7326.19.00.80 & 7326.90.86.88 —— Metal Clips (Iron/Steel)
| Item | Content |
|---|---|
| Base Tariff | 2.9% (Ad valorem) |
| Additional Tariff (Section 301) | +25.0% |
| 122 Clause Tariff (Steel/Aluminum/Copper) | +50.0% |
| Total Effective Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption? | ❌ NO (High risk of denial) |
| Legal Basis Path | USITC:7326 → Section 301: Footnote 9903.88.01 → 122 Clause: Steel Surcharge |
📌 Explanation:
- These codes fall under Chapter 73 (Articles of Iron or Steel).
- They are subject to the 25% Section 301 tariff.
- Crucially, they also incur a 50% "122 Clause" tariff specifically targeting steel/aluminum/copper products.
- Total burden: 87.9%. This is an extremely high-cost classification. Avoid if possible.
🎯 2. 8308.20.60.00 —— Metal Clasps/Fasteners (Base Metal)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | +25.0% |
| 122 Clause Tariff (Steel/Aluminum/Copper) | +50.0% (Note: Data indicates total 35%, implying possible partial exemption or specific code nuance) |
| Total Effective Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption? | ❌ NO |
| Legal Basis Path | USITC:8308 → Section 301 |
📌 Explanation:
- This code classifies metal as Base Metal Accessories (Ch 83) rather than general Steel Articles (Ch 73).
- While the base rate is 0%, the 25% Section 301 applies.
- The data shows a 35% total, which is significantly lower than the 87.9% for general steel parts.
- Strategy: If the clip is metallic, argue for "Base Metal Accessory" (Ch 83) rather than "Steel Part" (Ch 73) to save ~53% in taxes.
🎯 3. 3926.90.85.00 —— Plastic Clamping Fasteners
| Item | Content |
|---|---|
| Base Tariff | 6.5% |
| Additional Tariff | +7.5% |
| 122 Clause Tariff | +10% |
| Total Effective Rate | 24.0% |
| Tax Calculation | CIF Value × 24.0% |
| De Minimis Exemption? | ❌ NO (Data implies no de minimis for this category in the provided text) |
| Legal Basis Path | USITC:3926 → Specific Footnotes |
📌 Explanation:
- This code specifically identifies Plastic Clamping Fasteners.
- The total tax is 24.0%, which is the most competitive rate for metal-like functionality if the material is plastic.
- Lower base rate (6.5%) and moderate surcharges.
🎯 4. 3926.90.99.89 —— Other Plastic Articles (General)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Additional Tariff | +7.5% |
| 122 Clause Tariff | +10% |
| Total Effective Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption? | ❌ NO |
| Legal Basis Path | USITC:3926 → General Footnotes |
📌 Explanation:
- This is the lowest tax rate (22.8%) in the provided data.
- Applicable if the plastic clip is not specifically classified as a "clamping fastener" but as a general "other plastic article."
- Optimization Opportunity: If your plastic clip is simple and doesn't fit the strict "clamping fastener" definition, this code may apply.
🛠️ Part IV: Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
✅ 1. Required Documentation Checklist (Non-Negotiable)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specifications | ✔️ | Must explicitly state Material (e.g., "Nylon 66" vs. "Stainless Steel 304"). |
| ✅ Photos (Clear & Detailed) | ✔️ | Show the clip's structure, locking mechanism, and any material markings. |
| ✅ Commercial Invoice | ✔️ | Description must be precise: "Plastic Wall Panel Clip" or "Metal Wall Panel Bracket." Do not just write "Clip." |
| ✅ Origin Certificate (CO) | ✔️ | To prove Country of Origin (China triggers surcharges). |
| ✅ Material Test Report | ✔️ | Third-party lab report confirming polymer content or metal alloy. Critical for Ch 39 vs. Ch 73/83. |
✅ 2. Declaration Strategy (Key Mantras)
🔥 "Material is King, Function is Queen. Declare Precisely, Save Taxes."
| Scenario | Correct Declaration | Incorrect Practice | Consequence |
|---|---|---|---|
| Plastic Clip | 3926.90.99.89 or 3926.90.85.00 |
Declare as "Metal Clip" | Tax jumps from 22.8% to 87.9%! |
| Metal Clip | 8308.20.60.00 (if clasp-like) |
Declare as "General Steel Part" (7326...) |
Tax jumps from 35% to 87.9%! |
| Mixed Material | Separate shipment or declare dominant material | Mixed declaration | Customs seizure or re-classification penalty. |
| Vague Description | "Wall Panel Fixing Hardware" | "Hook" or "Fastener" | Ambiguity leads to audit and delays. |
✅ 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Clips | Provide design drawings to prove if they are "Clasps" (Ch 83) or "General Parts" (Ch 73). |
| Plastic with Metal Insert | If >50% metal by weight/value, customs may classify as Metal. Provide weight breakdown. |
| Small Batch (De Minimis) | ⚠️ Warning: The data indicates no de minimis exemption for these codes. Ensure compliance even for small shipments. |
| Transshipment (e.g., Vietnam) | Verify origin rules. Transshipment to avoid US tariffs is illegal and carries high risk of detention. |
🌍 Part V: Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.90.99.89 (Plastic) or 8308.20.60.00 (Metal) |
22.8% (Plastic) / 35.0% (Metal) | None specific, but accurate HS is critical | Avoid 7326 codes if possible due to 87.9% rate. |
| 🇨🇳 China | 3926.90.99.89 or 7326.90.86.88 |
5-8% (Import Duty) | RoHS, CCC (if applicable) | Low import duty, but export controls may apply. |
| 🇪🇺 EU | 3926.90.99 or 7326.90.89 |
3-5% (Standard MFN) | CE, REACH | No Section 301-like tariffs, but strict environmental rules. |
| 🇬🇧 UK | 3926.90.99 or 7326.90.89 |
3-5% | UKCA | Post-Brexit rules mirror EU but require UKCA marking. |
📌 Conclusion:
- USA is the highest-cost market due to Section 301 and 122 Clause tariffs.
- Plastic clips (Ch 39) are significantly more tax-efficient than steel clips (Ch 73) in the US.
- If your product can be redesigned to use high-strength plastic, you can save up to 65% in import duties compared to steel alternatives in the US.
📌 Part VI: Common Mistakes & Pitfall Guide (Lessons from the Trenches)
❌ Mistake 1: Classifying Metal Clips under 7326.19.00.80
👉 Result: 87.9% Tax.
💡 Fix: Check if the clip is a "clasp" or "fastener" (8308.20.60.00) to reduce tax to 35%.
❌ Mistake 2: Calling Plastic Clips "General Hardware" without specifying material
👉 Result: Customs may assign a default metal code (87.9%).
💡 Fix: Explicitly state "Polymer/Plastic Material" on the invoice and packing list.
❌ Mistake 3: Using "Clip" as the only description
👉 Result: Customs will request additional info, causing delays.
💡 Fix: Use "Plastic Wall Panel Clip, Nylon 66, Non-Sliding" or "Metal Wall Panel Clip, Steel, Classp Type".
✅ Correct Declaration Example:
"PLASTIC CLIPS FOR WALL PANELS, NYLON 66 MATERIAL, COLOR BLACK, MODEL WP-100, MADE IN CHINA"
🎯 Part VII: Conclusion: Precision Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Plastic is Cheap (22.8%), Metal is Expensive (35-87.9%). Declare Material First, Function Second!"
🔹 "Ch 39 Wins, Ch 83 Ties, Ch 73 Loses. Avoid 7326 if you can!"
📌 Pro Tip:
If you are importing large volumes, consider HS Code Advance Rulings from US Customs (CBP) to lock in the classification.
Also, explore Material Substitution: Can your wall panel clip be engineered from High-Impact Plastic instead of Steel? The tax savings alone could justify R&D costs.
📣 Immediate Action:
📞 Contact Your Broker: Provide product photos and material specs.
📄 Update Invoice: Clearly state material and function.
🚀 Optimize Supply Chain: Shift to Plastic (Ch 39) or Specific Metal Fasteners (Ch 83) to minimize US import costs.
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tax Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.