壁挂固定挂钩
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7616995175 | 37.5% | CN | US | Official Doc |
| 7326200020 | 88.9% | CN | US | Official Doc |
| 3926902500 | 24.0% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 3926301000 | 24.0% | CN | US | Official Doc |
AI Analysis
🪝 Wall-Mounted Hooks (Fixed Wall Mounts / Hangers)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: What Exactly Are "Wall-Mounted Hooks"?
Wall-mounted hooks are fixed accessories used for hanging bags, coats, towels, or light household items. In international trade, classification depends strictly on the material composition. There is no single "hook" code; instead, they are categorized into three main material groups: Aluminum, Iron/Steel, and Plastic.
⚠️ Critical Distinction:
- Aluminum Hooks: Classified under Chapter 76.
- Iron/Steel Hooks: Classified under Chapter 73. Note: Steel hooks attract the highest punitive tariffs due to specific trade restrictions.
- Plastic Hooks: Classified under Chapter 39.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority)
| HS Code | Product Description | Applicable Material | Key Characteristics |
|---|---|---|---|
7616.99.51.75 |
Aluminum articles, other | Aluminum | Wall-mounted fixed hooks made of aluminum alloy. |
7326.20.00.20 |
Other articles of iron or steel | Iron/Steel | Fixed wall hooks. High Risk: Attracts additional 50% tariff on steel/aluminum products. |
7326.90.86.88 |
Other articles of iron or steel | Iron/Steel | Alternative classification for steel/iron hooks. High Risk: Attracts additional 50% tariff on steel/aluminum products. |
3926.90.25.00 |
Other articles of plastic | Plastic | General plastic wall hooks. |
3926.30.10.00 |
Handles and knobs of plastic | Plastic | Plastic hooks classified as "handles/knobs" if designed for gripping rather than just hanging. |
🔍 Key Reminder:
- Steel/Iron hooks (7326...) are heavily penalized. The total tax burden exceeds 87-89% due to layered tariffs.
- Plastic hooks (3926...) and Aluminum hooks (7616...) have significantly lower total taxes (24%-37.5%).
- Material proof (e.g., Mill Test Certificate for metal, Material Safety Data Sheet for plastic) is crucial for customs declaration.
💰 III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Additions)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: 2025/2026 (Current Trade Regulations)
🎯 1. 7616.99.51.75 — Aluminum Articles (Aluminum Hooks)
| Item | Content |
|---|---|
| Base Duty Rate | 2.5% |
| Additional Duty (Section 301) | +25.0% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| Legal Basis | Standard Chapter 76 rates + Trade Act additions |
📌 Explanation:
- Aluminum products face the lowest punitive burden among metals.
- Total cost increase is manageable at 37.5%.
- No additional 50% surcharge applies to this specific aluminum subheading in this context.
🎯 2. 7326.20.00.20 & 7326.90.86.88 — Iron/Steel Articles (Steel Hooks)
| Item | Content |
|---|---|
| Base Duty Rate | 2.9% - 3.9% |
| Additional Duty (Section 301) | +25.0% |
| Section 122 Duty | +10.0% |
| Special Surcharge (Steel/Aluminum) | +50.0% |
| Total Tax Rate | 87.9% - 88.9% |
| Tax Calculation | CIF Value × ~88% |
| Legal Basis | USITC Specific Footnotes for Steel/Aluminum |
📌 Explanation:
- ⚠️ EXTREMELY HIGH COST: Steel hooks are subject to a special 50% surcharge on top of the standard 301 tariffs.
- Section 122 Duty and 301 Tariffs stack cumulatively.
- Total tax burden is nearly 90%. This makes steel hooks prohibitively expensive for US importation from China.
- Recommendation: Avoid importing steel hooks from China if possible, or factor this massive cost into pricing.
🎯 3. 3926.90.25.00 & 3926.30.10.00 — Plastic Articles (Plastic Hooks)
| Item | Content |
|---|---|
| Base Duty Rate | 6.5% |
| Additional Duty (Section 301) | +7.5% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 24.0% |
| Tax Calculation | CIF Value × 24.0% |
| Legal Basis | Standard Chapter 39 rates + Trade Act additions |
📌 Explanation:
- Plastic hooks face the lowest overall tax rate at 24%.
- The Section 301 additional duty is only 7.5% (compared to 25% for metals).
- This is the most cost-effective material choice for US market entry.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Material Verification is Mandatory
| Document | Must Provide? | Explanation |
|---|---|---|
| ✅ Material Certificate | ✔️ | Crucial for distinguishing Aluminum vs. Steel. Steel incurs 50% extra; Aluminum does not. |
| ✅ Product Photos | ✔️ | Clear images showing the surface finish (painted, chrome-plated, etc.) to confirm material type. |
| ✅ Bill of Lading/Invoice | ✔️ | Must clearly state "Wall Mounted Hooks" and specify material (e.g., "Aluminum Hook" vs. "Steel Hook"). |
| ✅ Packaging List | ✔️ | Ensure no mixing of steel and plastic components in one shipment without proper separation. |
✅ 2. Declaration Strategy (Key Mantra)
🔥 "Material Defines Duty; Steel is the Enemy; Plastic is the Friend!"
| Scenario | Correct Declaration | Incorrect Practice | Consequence |
|---|---|---|---|
| Aluminum Hook | HS 7616.99.51.75Desc: "Aluminum Wall Hook" |
Misdeclare as Plastic | Risk of audit, penalties, potential reclassification to Steel (higher tax) |
| Steel Hook | HS 7326.20.00.20Desc: "Steel Wall Hook" |
Declare as Aluminum | Severe Fraud Risk: Penalties, seizure, blacklisting |
| Plastic Hook | HS 3926.90.25.00Desc: "Plastic Wall Hook" |
Declare as Iron | Unnecessary high tax (88% vs 24%) |
| Mixed Package | Separate Line Items | Mix Steel + Plastic in one line | Customs may assess entire shipment at the highest rate (Steel rate) |
✅ 3. Special Handling & Optimization
| Situation | Recommendation |
|---|---|
| Cost Reduction Strategy | Switch to Plastic or Aluminum. The tax difference between Steel (88.9%) and Plastic (24%) or Aluminum (37.5%) is enormous. Consider redesigning hooks to use Aluminum alloys or high-density plastics. |
| Section 122 Impact | All categories are subject to a 10% Section 122 duty. This is a temporary but current reality for most goods from China. Factor this into all price calculations. |
| Origin Labeling | Ensure "Made in China" is clearly marked on products and packaging to comply with CBP (U.S. Customs) marking requirements. Failure to mark can result in fines. |
| Pre-Ruling Application | For high-volume shipments, consider applying for an Advance Ruling from CBP to confirm the HS Code, especially for ambiguous items (e.g., metal-plastic composite hooks). |
🌍 V. Global Market Comparison (2026 Snapshot)
| Market | Recommended HS Code | Total Tax (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 7616.99.51.75 (Al)3926.90.25.00 (Pl) |
37.5% (Al) 24.0% (Pl) |
AVOID STEEL (7326...) due to 88.9% total tax. |
| 🇪🇺 EU | Various (Chapter 73/76/39) | 0-4.5% | No Section 301 or 122 duties. Steel is feasible. |
| 🇨🇳 China (Import) | Various | 5-10% | Domestic consumption or re-export hubs. |
📌 Conclusion:
- The US market is uniquely punitive for Chinese-made steel hardware.
- Plastic hooks are the most profitable to import to the US due to low tariffs (24%).
- Aluminum is a viable middle ground (37.5%), offering better perceived value than plastic with manageable taxes.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring "Iron Hooks" as "Aluminum" to avoid tariffs
👉 Consequence: Customs inspection reveals steel content → Confiscation + Fines + Legal Action.
❌ Mistake 2: Ignoring the "Steel/Aluminum Surcharge" for 7326 codes
👉 Consequence: Budgeting assumes 25% tariff, but actual cost is 88.9% → Massive Profit Loss.
❌ Mistake 3: Mixing Steel and Plastic hooks in one container without separate line items
👉 Consequence: Customs may assess the entire container at the higher steel tax rate.
✅ Correct Action:
"Aluminum Wall Hooks, 5-inch, Matte Black, Pack of 10, HS 7616.99.51.75"
"Plastic Wall Hooks, Heavy Duty, White, Pack of 12, HS 3926.90.25.00"
🎯 VII. Conclusion: Smart Sourcing for Cost Efficiency
🎯 Key Takeaways:
🔹 "Steel is Expensive, Plastic is Cheap, Aluminum is Balanced."
🔹 Total Tax for Steel: ~88% → Avoid if possible.
🔹 Total Tax for Plastic: 24% → Optimal for volume.
🔹 Total Tax for Aluminum: 37.5% → Good for premium positioning.
📌 Pro Tip:
If you must import steel hooks, consider transshipment or assembly in a third country (e.g., Vietnam, Mexico) to mitigate Section 301 and Section 122 duties, but ensure substantial transformation occurs to change the Country of Origin legally. Always consult a licensed customs broker for specific supply chain optimization.
📣 Immediate Action:
📞 Review your BOM (Bill of Materials): Are you importing steel hooks?
🔄 Pivot to Aluminum or Plastic: Save up to 65% in taxes.
🚀 Declare Accurately: Never mislabel material. The risk is not worth the penalty.
✨ Professional Customs Compliance Starts with Material Truth!
💼 Your Profit Margin Depends on Accurate Classification!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.