扳手卷包工具
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4202924500 | 55.0% | CN | US | Official Doc |
| 4202929700 | 52.6% | CN | US | Official Doc |
| 6307909891 | 24.5% | CN | US | Official Doc |
AI Analysis
🛠️ Wrench & Rolling Package Tools (Wrenches, Tool Bags, & Containers)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 Part 1: Product Definition & Classification: What Exactly Are "Wrench Rolling Package Tools"?
"Wrench Rolling Package Tools" typically refer to hand tools (specifically wrenches) and accessories for storing/carrying them, such as tool rolls, bags, or cases. In international trade, these items are strictly separated based on their material and function.
Core Distinction:
1. The Wrench Itself (Metal Tool): Generally falls under Chapter 82 (Base Metal Tools). Note: The provided <DATA> does NOT include base metal wrenches (HS 8203). Therefore, we must focus on the containers/accessories or other specific classifications provided.
2. The Carrying Cases/Bags (Textile/Plastic): These are the items explicitly covered in <DATA>. They are classified as "Containers" or "Other articles" depending on their specific use and material.
⚠️ Critical Classification Point:
- If the item is a metal wrench, it is NOT in the provided data (usually HS 8203.00).
- If the item is a wrench roll/tool bag/case, it falls under Chapter 42 (Leather/Plastic/Textile Containers) or Chapter 63 (Other Textile Articles).
- Misclassification Risk: Do not misdeclare a metal wrench as a "tool bag" to avoid taxes, or vice versa. Customs will inspect the material.
📦 Part 2: HS Code Classification Details (2026 Latest Tariff Alignment)
Based strictly on the provided <DATA>, the following HS Codes apply to tool containers, bags, and other related textile/plastic items:
| HS Code | Product Description | Applicable Scenario | Material/Type |
|---|---|---|---|
4202.92.45.00 |
Travel, sports, and similar bags (Other) | Tool rolls, tool bags, cosmetic cases made of plastic sheeting or textile | ✅ Outer surface: Plastic/Textile |
4202.92.97.00 |
Other containers (Other) | General tool boxes/cases made of plastic sheeting or textile not specifically "travel/sports" | ✅ Outer surface: Plastic/Textile |
6307.90.98.91 |
Other made-up articles (Other) | Specialized tool wraps, soft tool rolls not fitting Chapter 42 definitions, or miscellaneous textile tool accessories | ✅ Other Textile Article |
🔍 Key Reminder:
-4202.92...: Applies to bags/cases with an outer surface of plastic sheeting or textile materials. This includes most modern "wrench rolls" or "tool bags." -6307.90.98.91: A catch-all for other made-up textile articles. If the tool roll is made of fabric but doesn't fit the strict "container" definition of Chapter 42 (e.g., a simple fabric sleeve), it may fall here. - Metal Wrenches: Not included in this data. If you are exporting actual metal wrenches, you need HS 8203 (not provided in<DATA>).
💰 Part 3: 2026 Latest Tariff Rate Detailed Explanation (US Market)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current tariffs apply (Note: Data reflects specific base + added tariffs)
🎯 1. 4202.92.45.00 —— Travel, Sports, and Similar Bags (Tool Bags)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301/Other) | 0.0% |
| Total Tariff Rate | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Eligibility | ✅ Yes (Generally eligible for $800 de minimis if shipped via courier/post) |
| Legal Basis | HTSUS 4202.92.45.00 |
📌 Explanation:
- Tool bags and travel-style tool cases made of textile or plastic sheeting currently enjoy 0% tariff under this specific subheading. - This is a highly favorable classification for tool accessories. - Condition: The outer surface must be plastic sheeting or textile. Leather or metal cases are excluded.
🎯 2. 4202.92.97.00 —— Other Containers (General Tool Cases)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301/Other) | 0.0% |
| Total Tariff Rate | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Eligibility | ✅ Yes (Generally eligible) |
| Legal Basis | HTSUS 4202.92.97.00 |
📌 Explanation:
- For tool cases that are not primarily for "travel/sports" (e.g., a generic plastic tool box or non-travel bag), this code applies. - Also 0% total tax. - Ensure the description matches "Other containers" to avoid being miscategorized as "travel bags" if functionally distinct.
🎯 3. 6307.90.98.91 —— Other Made-Up Articles (Tool Wraps/Sleeves)
| Item | Detail |
|---|---|
| Base Tariff | 7.0% |
| Additional Tariff (Section 301/Other) | 7.5% |
| Total Tariff Rate | 14.5% |
| Tax Calculation | CIF Value × 14.5% |
| De Minimis Eligibility | ❌ Check Specific Rules (Some textile articles may be excluded from de minimis depending on origin/value; verify current CBP rules) |
| Legal Basis | HTSUS 6307.90.98.91 |
📌 Explanation:
- This code carries a significant tax burden of 14.5%. - It is used for textile articles that are not classified as containers (Chapter 42). - Strategy: If your tool roll/bag can be classified under 4202 (as a container), DO NOT use 6307. You will save 14.5% in taxes. Only use 6307 if the item is truly a "made-up article" (e.g., a simple fabric sleeve without rigid structure) that fails Chapter 42 definitions.
🛠️ Part 4: Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
✅ 1. Documentation Checklist (Must-Have)
| Document | Required | Description |
|---|---|---|
| ✅ Commercial Invoice | ✔️ | Clearly state: "Tool Bag," "Wrench Roll," or "Tool Case." Avoid vague terms like "Hardware." |
| ✅ Product Photos | ✔️ | Show the outer material (textile/plastic) and structure (zippers, compartments). |
| ✅ Material Declaration | ✔️ | Specify: "Outer: Polyester Textile," "Inner: Nylon," "No Metal/Leather Outer Layer." |
| ✅ Packaging List | ✔️ | List contents clearly (e.g., "1x Tool Roll, 0x Metal Wrenches"). |
| ✅ HS Code Confirmation | ✔️ | Provide the 10-digit HS Code (e.g., 4202.92.45.00) and rationale. |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 “Material Defines Chapter, Container Defines 42, Avoid 63 for Savings!”
| Scenario | Correct Declaration | Common Mistake |
|---|---|---|
| Tool Roll/Bag (Textile/Plastic) | 4202.92.45.00 or 4202.92.97.00 |
❌ Misdeclare as 6307 → Pay 14.5% instead of 0% |
| Metal Wrenches | NOT IN DATA (Use 8203.00) | ❌ Declare as "Tool Bag" → Smuggling/False Declaration Risk |
| Leather Tool Case | NOT IN DATA (Use 4202.1x) | ❌ Declare as Plastic/Textile → Seizure/Fine |
| Plastic Tool Box (Rigid) | Check if fits 4202 or 3926 |
❌ Overgeneralize as "Other" |
📌 Key Insight:
- The biggest savings come from correctly classifying tool bags under 4202 (0% tax) rather than 6307 (14.5% tax). - Do not mix metal tools with textile bags in the same shipment line item. Declare them separately.
✅ 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| Tool Roll with Metal Reinforcement | If the outer surface is still textile/plastic, it may still qualify for 4202. Provide photos showing the textile exterior. |
| OEM Custom Tool Bags | Provide the design specification. If the design is unique, argue for "Other containers" (4202.92.97.00) if it doesn’t fit "travel/sports." |
| De Minimis Shipments (Under $800) | 4202 items are generally safe for de minimis entry. 6307 items may face stricter scrutiny or different de minimis rules. Verify current CBP de minimis exclusions for China. |
| Mixed Shipment (Wrenches + Bags) | Ship separately or declare separately. Mixing metal tools (Chapter 82) with textile bags (Chapter 42) can cause customs delays if not clearly itemized. |
🌍 Part 5: Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code (For Tool Bags) | Tariff Rate | Notes |
|---|---|---|---|
| 🇺🇸 USA | 4202.92.45.00 / 4202.92.97.00 |
0% | Best for textile/plastic tool bags. Avoid 6307 (14.5%). |
| 🇨🇳 China (Import) | 4202.92 |
Varies | Check China’s HS tariff book for import duties. |
| 🇪🇺 EU | 4202.92 |
0-12% | EU may have different subheadings. Verify with EU TARIC. |
| 🇨🇦 Canada | 4202.92 |
0% | Similar to US, but check CUSMA eligibility. |
| 🇬🇧 UK | 4202.92 |
0% | Post-Brexit tariffs may vary slightly. |
📌 Conclusion:
- The US market offers 0% tariff for textile/plastic tool bags/cases under Chapter 42. - Avoid Chapter 63 for tool bags unless structurally incapable of being a container, to save 14.5%.
📌 Part 6: Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring a textile tool bag as 6307.90.98.91
👉 Consequence: Pay 14.5% tax unnecessarily.
💡 Fix: Classify as 4202.92.45.00 or 4202.92.97.00 (0% tax).
❌ Mistake 2: Declaring metal wrenches as "Tool Bags" to avoid tax
👉 Consequence: Seizure, fines, and blacklisting by CBP.
💡 Fix: Declare metal tools under HS 8203 (if applicable) or seek correct duty-free status if eligible.
❌ Mistake 3: Ignoring Material Composition
👉 Consequence: If the outer layer is leather, it must be declared as leather (different tariff). Misdeclaration leads to penalties.
💡 Fix: Always specify "Outer Surface: Polyester/Plastic" in documentation.
✅ Best Practice:
“Wrench Roll, Exterior: 600D Polyester, Interior: Nylon, Zipper Closure, No Metal Hardware in Outer Layer, Model TR-100”
🎯 Part 7: Conclusion: Precise Classification = Maximum Savings!
🎯 Remember the Mnemonic:
🔹 “Tool Bag? Use 4202 (0% tax)! Avoid 6307 (14.5% tax)!”
🔹 “Metal Wrenches? Not in This Data! Use 8203!”
🔹 “Material Matters! Textile/Plastic = 0% in US!”
📌 Pro Tip:
If your tool bags are original design and meet the definition of "travel/sports" containers, use 4202.92.45.00. If they are general-purpose, use 4202.92.97.00. Both are 0%.
For de minimis shipments, ensure the value is under $800 and the commodity is eligible.
📣 Immediate Action:
📞 Consult a Customs Broker to confirm if your specific tool roll/bag qualifies as a "container" under 4202.
🚀 Optimize your HS Code to save 14.5% on every shipment.
✨ Professional Clearance Starts with Accurate Classification!
💼 Your Cost Efficiency Depends on the First 6 Digits!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.