拉铆枪枪头
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8205592000 | 35.0% | CN | US | Official Doc |
| 8467115090 | 35.0% | CN | US | Official Doc |
| 8467195090 | 35.0% | CN | US | Official Doc |
| 8205595560 | 40.3% | CN | US | Official Doc |
Product Images
AI Analysis
🔫 Rivet Gun Noses / Tips (拉铆枪枪头)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Hardware Exports
📌 I. Product Definition & Classification: What Exactly is a "Rivet Gun Nose"?
A Rivet Gun Nose (often referred to as a "jaw," "die," or "tip") is the critical working end of a riveting tool. It is not the entire power unit but the interchangeable component that physically interacts with the rivet. In international trade, its classification depends heavily on whether it is considered a hand tool part, a pneumatic tool part, or a standalone hand tool.
Key Classification Logic: * Manual/Handheld Focus: If the nose is designed for manual rivet guns, it is often classified under hand tools (Chapter 82). * Mechanical/Pneumatic Focus: If the nose is specific to pneumatic or hydraulic rivet guns, it may fall under parts of machinery/tools (Chapter 84). * Material: Typically made of hardened steel or high-strength alloy metal.
⚠️ Critical Distinction:
- If sold as a standalone accessory for manual rivet guns → Likely HS 8205.
- If sold as a replacement part for pneumatic/electric rivet guns → Likely HS 8467.
- Do NOT classify as "General Fasteners" (HS 7318) unless it is the rivet itself, not the tool part.
📦 II. HS Code Classification Details (2026 Latest Tariff Alignment)
| HS Code | Product Description | Application Scenario | Key Attributes |
|---|---|---|---|
8205.59.20.00 |
Hand tools (other than those of heading 82.02, 82.05 or 82.06): Other hand tools | Manual rivet gun noses; standalone manual gripping tools | ✅ Manual Tool; Metal; No Power Output |
8467.11.50.90 |
Tools for working in the metal: Hand-held tools with self-contained electric or pneumatic motor: With self-contained electric or pneumatic motor | Noses/dies specifically for pneumatic rivet guns | ✅ Pneumatic/Mechanical Power Output; Metal |
8467.19.50.90 |
Other hand-held tools with self-contained electric or pneumatic motor | Alternative classification for pneumatic rivet accessories | ✅ Pneumatic Feature; Other Category Match |
8205.59.55.60 |
Other hand tools: Other: Other | Manual rivet gun noses where specific manual tool codes don't apply | ✅ Hand Tool; Metal Material; General Category |
🔍 Expert Note:
- The choice between 8205 (Hand Tools) and 8467 (Power Tool Parts) is the biggest risk factor.
- 8205 implies a simple mechanical hand device.
- 8467 implies a part of a powered device.
- Customs authorities often scrutinize whether the item is a "part" (8467) or a "tool" (8205).
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharge & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 8205.59.20.00 — Rivet Gun Nose (Manual Tool Classification)
| Item | Content |
|---|---|
| Base Tariff | 0% (ad valorem) |
| USITC Surcharge (Section 301) | +25% |
| 122 Section Tariff | +10% |
| IEEPA Surcharge | Not explicitly listed in DATA, but often applies. DATA specifies 35% total. |
| Total Tariff | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No (High tariff rate exceeds exemption thresholds) |
| Legal Path | USITC:8205.59.20.00 → Section 301: 25% → Section 122: 10% |
📌 Explanation:
- Classified as a manual hand tool.
- Base duty is 0%, but the 25% Section 301 tariff and 10% Section 122 tariff apply, resulting in a 35% total.
- Risk: Low risk of misclassification if clearly a manual tool part.
🎯 2. 8467.11.50.90 — Rivet Gun Nose (Pneumatic Tool Part)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Surcharge (Section 301) | +25% |
| 122 Section Tariff | +10% |
| Total Tariff | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No |
| Legal Path | USITC:8467.11.50.90 → Section 301: 25% → Section 122: 10% |
📌 Explanation:
- Classified as a part of a pneumatic tool.
- Similar tariff structure: 0% base + 25% + 10% = 35%.
- Risk: Higher scrutiny on "part vs. tool" definition.
🎯 3. 8467.19.50.90 — Other Pneumatic/Hand-held Tool Parts
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Surcharge (Section 301) | +25% |
| 122 Section Tariff | +10% |
| Total Tariff | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No |
| Legal Path | USITC:8467.19.50.90 → Section 301: 25% → Section 122: 10% |
📌 Explanation:
- A catch-all for pneumatic tool parts not specifically listed elsewhere.
- Same 35% total rate.
🎯 4. 8205.59.55.60 — Other Hand Tools (General Manual)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| USITC Surcharge (Section 301) | +25% |
| 122 Section Tariff | +10% |
| Total Tariff | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Eligibility | ❌ No |
| Legal Path | USITC:8205.59.55.60 → Base: 5.3% → Section 301: 25% → Section 122: 10% |
📌 Explanation:
- This is the most expensive option due to the 5.3% base duty.
- Occurs when the tool is not specifically categorized under the 0% base subheadings.
- Risk: Avoid this if possible; it increases cost significantly.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Guide)
✅ 1. Documentation Checklist (Mandatory)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must state: "Rivet Gun Nose/Die," Material (e.g., Chrome Vanadium Steel), Model Number. |
| ✅ Photographs | ✔️ | Clear images showing the nose only, no power unit attached. Show scale if small. |
| ✅ Commercial Invoice | ✔️ | Description: "Replacement Nose for Rivet Gun, Model XYZ." Avoid vague terms like "Tool Part." |
| ✅ Packing List | ✔️ | Confirm quantity and weight. |
| ✅ Function Description | ✔️ | Briefly explain: "Interchangeable tip used to grip and break rivet mandrels." |
✅ 2. Declaration Tips (Key Mantras)
🔥 “Specify Manual or Pneumatic! Don’t Mix Tools and Parts!”
| Scenario | Correct Declaration | Wrong Declaration |
|---|---|---|
| Manual Rivet Gun Nose | HS 8205.59.20.00 ("Hand Tool") |
HS 8467 (Pneumatic) → Risk of penalty |
| Pneumatic Rivet Gun Nose | HS 8467.11.50.90 ("Pneumatic Tool Part") |
HS 8205 (Hand Tool) → Risk of penalty |
| Whole Rivet Gun + Noses | Split Invoice: Gun vs. Noses | Single line "Rivet Tool Kit" → Complex classification |
| Rivets (Fasteners) | HS 7318.15 (Not in DATA) |
HS 8205 (Tool Part) → Wrong Chapter |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Noses | Provide CAD drawings or OEM agreement to prove specific fitment. |
| Mixed Containers | Clearly separate "Hand Tools" (8205) and "Power Tool Parts" (8467) on invoice. |
| High-Value Precision Noses | Justify base duty rate (0% vs 5.3%) with technical specs showing specific use. |
| Return/Warranty Parts | Mark as "Return Goods" if applicable, but ensure HS code matches original import. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 8205.59.20.00 / 8467.11.50.90 |
35.0% (Manual/Pneumatic) | No special certs required | High Tariff Due to Sec 301 & 122 |
| 🇨🇳 China | 8205.59 / 8467.11 |
5-7% (Import Duty) | None | Domestic trade standard |
| 🇪🇺 EU | 8205.50 / 8467.29 |
0-6.5% | CE (if electric) | Lower surcharges than US |
| 🇯🇵 Japan | 8205.50 / 8467.29 |
0-5% | PSE (if electric) | Moderate tariffs |
| 🇦🇺 Australia | 8205.50 / 8467.29 |
5% | RCM (if electric) | Standard tariff |
📌 Conclusion:
- The USA is the most challenging market due to the 35% total tariff (0% base + 25% + 10%).
- EU/JP/AU have significantly lower total duties.
- Strategy: For US market, ensure accurate HS coding to avoid 40.3% rate if possible.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring "Rivet Gun Noses" as "General Hardware" (HS 7318)
👉 Consequence: Misclassification → Penalty + Back Duty! (Hardware parts for tools are NOT fasteners).
❌ Mistake 2: Using HS 8205 for Pneumatic Tool Parts
👉 Consequence: Customs may reject "Hand Tool" claim → Delay & Inspection.
❌ Mistake 3: Ignoring Section 122 Tariff
👉 Consequence: Under-declaring tax → Underpayment Penalty + Interest.
❌ Mistake 4: Combining Rivets and Noses in One HS Code
👉 Consequence: Different HS codes have different duties → Complexity & Risk.
✅ Correct Practice:
“Replacement Rivet Gun Nose, Model XYZ, Chrome Vanadium Steel, for Manual Rivet Gun, HS 8205.59.20.00”
🎯 VII. Conclusion: Precision in Classification Saves Money!
🎯 Remember the Mantra:
🔹 “Manual = 8205 (35%), Pneumatic = 8467 (35%), Avoid 8205.55 (40.3%)!”
🔹 “Section 301 (25%) + Section 122 (10%) = 35% for Most Rivet Tools!”
📌 Pro Tip:
If your rivet gun noses are high-value precision tools, consider applying for an Advance Ruling from US Customs (CBP) to confirm the 35% rate vs. 40.3% rate.
For US Market, calculate the 35% Landed Cost accurately in your pricing model.
📣 Immediate Action:
📞 Consult with your customs broker before shipping.
📄 Provide clear photos and specs.
🚀 Get the right HS Code, pay the right tax, clear customs faster!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every 0.3% Tariff Difference Counts!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.