断螺母取出器
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326190080 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 8205595560 | 40.3% | CN | US | Official Doc |
| 8205591000 | 42.2% | CN | US | Official Doc |
| 8205595510 | 40.3% | CN | US | Official Doc |
Product Images
AI Analysis
🛠️ Nut Extractors (Threaded Hole Extractors / Screw Extractors)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 I. Product Definition & Classification: What Exactly is a "Nut Extractor"?
Nut extractors (also known as screw extractors, bolt extractors, or threaded hole extractors) are specialized hand tools designed to remove broken, stripped, or seized screws, bolts, and nuts. In international trade, they are primarily classified based on their material and function.
Key Distinction Points: - Hand Tools (Power Tools excluded): If operated manually (e.g., hammered and twisted), they fall under Chapter 82 (Tools, implement, cutlery). - Steel/Iron Articles: If classified strictly as generic steel hardware without specific tool function recognition, they may fall under Chapter 73. - Material Conflict: No material conflict arises if the primary function is clearly that of a tool. However, misclassification as a generic steel part can lead to significantly higher tariffs.
⚠️ Critical Classification Logic:
- If it is a manual tool used for mechanical extraction →归入 Chapter 82 (Hand Tools)
- If it is considered a generic steel fitting/part with no specific tool designation →归入 Chapter 73 (Articles of Iron/Steel)
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Classification Logic |
|---|---|---|---|
8205.59.55.60 |
Other hand tools (Nut Extractor) | Manual removal of broken studs/nuts; professional mechanic kits | ✅ Tool Nature (Primary) |
8205.59.10.00 |
Other hand tools (Screw Extractor) | General manual screw/bolt removal tools; hardware store retail | ✅ Tool Nature (Primary) |
8205.59.55.10 |
Other metal hand tools (Screw Extractor) | Deduced as metal-made hand tools; general category | ✅ Tool Nature (Primary) |
7326.19.00.80 |
Other articles of iron/steel | Generic steel items; no specific tool function recognized | ❌ Generic Steel (Secondary) |
7326.90.86.88 |
Other articles of iron/steel | Deduced as metal (iron/steel) items; broad category | ❌ Generic Steel (Secondary) |
🔍 Key Reminder:
- Hand Tool Classification (Chapter 82) is generally preferred for specialized extraction tools to avoid the highest tariff burdens associated with generic steel articles under certain trade remedies. - Steel Article Classification (Chapter 73) often triggers additional punitive tariffs under Section 122 and other trade acts.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Ongoing (Current Trade Policy Enforce)
🎯 1. 8205.59.55.60 —— Other Hand Tools (Best for Specialized Extractors)
| Item | Detail |
|---|---|
| Base Duty Rate | 5.3% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Section 122 / IEEPA Surcharge | +10% (Specific to China-origin goods under current trade actions) |
| Total Tariff Rate | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Eligibility | ❌ No (Not eligible for low-value exemption) |
| Legal Basis Path | USITC:8205.59.55.60 → Section 301: 25% → IEEPA/Section 122: 10% |
📌 Explanation:
- This classification leverages the Hand Tool category, which has a lower base duty (5.3%) compared to generic steel articles. - The 25% Section 301 surcharge is standard for Chinese machinery/tools. - The 10% additional surcharge applies to specific Chinese-origin goods under current trade enforcement measures. - Total Effective Rate: 40.3% is significantly lower than the ~87.9% rate for generic steel classifications.
🎯 2. 8205.59.10.00 —— Other Hand Tools (General Manual Tools)
| Item | Detail |
|---|---|
| Base Duty Rate | 7.2% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Section 122 / IEEPA Surcharge | +10% |
| Total Tariff Rate | 42.2% |
| Tax Calculation | CIF Value × 42.2% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:8205.59.10.00 → Section 301: 25% → IEEPA/Section 122: 10% |
📌 Note:
- Slightly higher base duty (7.2%) than8205.59.55.60, leading to a total of 42.2%. - Suitable for general-purpose manual screw extractors not specifically marketed for extreme heavy-duty nut extraction.
🎯 3. 8205.59.55.10 —— Other Metal Hand Tools
| Item | Detail |
|---|---|
| Base Duty Rate | 5.3% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Section 122 / IEEPA Surcharge | +10% |
| Total Tariff Rate | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:8205.59.55.10 → Section 301: 25% → IEEPA/Section 122: 10% |
📌 Note:
- Same tax burden as8205.59.55.60. - Classification depends on precise product description in customs declarations.
🎯 4. 7326.19.00.80 & 7326.90.86.88 —— Articles of Iron/Steel (High Risk)
| Item | Detail |
|---|---|
| Base Duty Rate | 2.9% (ad valorem) |
| Section 301 Surcharge | +25.0% |
| Steel/Aluminum Surcharge (Section 122/IEEPA) | +50.0% (Specific to steel/aluminum products under certain trade acts) |
| Total Tariff Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:7326.xxxx → Section 301: 25% → Steel/Aluminum Surcharge: 50% |
📌 Critical Warning:
- Misclassifying nut extractors as generic steel articles can lead to a catastrophic tariff rate of 87.9%. - This includes a 50% surcharge specifically targeting steel/aluminum products under current trade policies. - Must avoid unless the item cannot be reasonably classified as a tool.
🛠️ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
✅ 1. Required Documentation List (Non-negotiable)
| Document | Required | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must clearly state "Manual Tool," "Extractor," "Thread Removal" |
| ✅ Product Photos | ✔️ | Show handle, spiral tip, and any branding labeling it as a tool |
| ✅ Commercial Invoice | ✔️ | Description: "Nut Extractor, Hand Tool, Steel" – NOT "Steel Pin" or "Hardware Part" |
| ✅ HS Code Declaration | ✔️ | Recommend 8205.59.55.60 or 8205.59.10.00 |
| ✅ Packing List | ✔️ | List items as tools, not raw materials |
✅ 2. Declaration Strategy (Key Mnemonics)
🔥 "Tool Function First, Steel Second! Name it Right, Save Big!"
| Scenario | Correct Declaration | Wrong Action |
|---|---|---|
| Manual Nut Extractor | 8205.59.55.60 (Hand Tool) |
Misdeclare as 7326.19.00.80 → 87.9% |
| Bolt Extractor Set | 8205.59.10.00 (Hand Tool) |
Split into "steel rods" + "handles" → Complex & High Risk |
| Generic Steel Pin | 7326.90.86.88 (Steel Article) |
Only if no tool function (rare for extractors) |
✅ 3. Special Circumstances
| Situation | Handling Advice |
|---|---|
| OEM/Private Label | Provide customer order + tool designation to prove "Tool" nature |
| Kit Components | Declare as a complete tool set if possible; avoid separate declaration of individual extractors |
| Steel Composition | Even if made of high-carbon steel, function defines classification. Do not emphasize "steel" in description. |
| Power-Driven Extractors | If motorized, may fall under Chapter 84 or 82 depending on design. Manual is key for Chapter 82. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Required | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 8205.59.55.60 |
40.3% | None specific | Avoid 7326 due to 87.9% rate |
| 🇨🇳 China | 8205.59.55.60 |
~5-7% | CCC (if applicable) | Standard tool tariff |
| 🇪🇺 EU | 8205.59.55.60 |
~5-8% | CE (if mechanical) | Lower base duties in EU |
| 🇬🇧 UK | 8205.59.55.60 |
~5-8% | UKCA | Post-Brexit alignment with EU |
| 🇦🇺 Australia | 8205.59.55.60 |
~5% | RCM | Low tariffs for tools |
📌 Conclusion:
- USA is the only major market with extreme punitive tariffs on steel goods, making accurate Hand Tool (Chapter 82) classification critical. - Misclassification as steel (7326) increases costs by 47.6 percentage points (87.9% vs 40.3%).
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring "Nut Extractor" as "Steel Screw Pin" or "Hardware Part"
👉 Consequence: Tax rate jumps to 87.9% → Massive cost increase!
❌ Error 2: Ignoring the "Hand Tool" nature in product descriptions
👉 Consequence: Customs may reclassify under Chapter 73 → Penalties + Back Taxes
❌ Error 3: Splitting tool sets into individual components
👉 Consequence: Complex declaration, higher risk of misclassification per item → Total tax > 100%
✅ Correct Approach:
"Nut Extractor Set, Manual, High-Carbon Steel, Professional Grade, Model XYZ"
🎯 VII. Conclusion: Precise Classification Saves Money!
🎯 Remember:
🔹 "Function Over Material!"
🔹 "Chapter 82 = ~40%, Chapter 73 = ~88%!"
🔹 "One percent error in description = Forty-seven percent loss in profit!"
📌 Pro Tip:
- Always provide product photos showing the tool's handle and functional design.
- If unsure, apply for an Advance Ruling from US Customs (CBP) to secure the 40.3% rate vs. the 87.9% risk.
📣 Immediate Action:
📞 Consult your customs broker with the correct HS Code: 8205.59.55.60
🚀 Ensure Profitability by Classifying as Hand Tools, Not Steel Parts!
✨ Professional Clearance, Starting from Accurate Classification!
💼 Every penny counts in international trade!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.