木型材 (HS 4409104010)
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4409225090 | 35.0% | CN | US | Official Doc |
| 4410190060 | 35.0% | CN | US | Official Doc |
| 4410110060 | 35.0% | CN | US | Official Doc |
| 4412924200 | 43.0% | CN | US | Official Doc |
| 4412999100 | 40.1% | CN | US | Official Doc |
Product Images
AI Analysis
🪵 Wood Moulding & Shaping (HS 4409.22.50.90 & Related)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 1. Product Definition & Classification: Do You Really Understand "Wood Moulding"?
Wood Moulding and Shaping refers to wood that has been processed along its entire length to obtain a uniform cross-section. In international trade, these products are distinct from raw planks or simple sawn timber because they feature continuous, shaped profiles (e.g., skirting boards, door frames, picture frames, parquet edges).
In the provided , the primary relevant code is 4409.22.50.90, which covers wood moulding/shaping that fits "other" residual categories. However, if the material is actually a panel (like particle board or plywood) rather than a solid wood profile, it may fall under 4410 or 4412 codes, as detailed below.
⚠️ Key Distinction:
- If the item is a solid wood profile (long, continuous shape, e.g., baseboard, crown molding) → HS 4409.22.50.90
- If the item is a panel made of wood particles/chips (Particle Board/OSB) → HS 4410.19.00.60 / 4410.11.00.60
- If the item is Plywood (layered wood) → HS 4412.92.42.00 / 4412.99.91.00
📦 2. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material/State |
|---|---|---|---|
4409.22.50.90 |
Wood moulding/shaping, other (Residual Category) | Solid wood profiles, skirting, door frames, trim not specifically listed elsewhere | ✅ Solid Wood, Continuous Profile |
4410.19.00.60 |
Wood-based panels, Other (Particle Board/OSB) | Wood particle board, similar panel products | ✅ Engineered Wood, Panel Form |
4410.11.00.60 |
Particle Board, Chipboard, Oriented Strand Board (OSB) | Standard particle board, OSB panels | ✅ Engineered Wood, Panel Form |
4412.92.42.00 |
Plywood, Veneered Panels, Other | Plywood, laminated wood products | ✅ Layered Wood (Plywood) |
4412.99.91.00 |
Other Plywood, Laminated Wood Products | Other laminated wood products (plywood category) | ✅ Layered Wood (Plywood) |
🔍 Important Note:
- HS 4409 applies to solid wood that has been shaped. If your product is made from chips or veneers glued together, do NOT use 4409. It must be classified under 4410 or 4412.
- The user input mentioned "Wood Moulding (HS 4409104010)," but the provided specifies 4409.22.50.90 as the applicable code for "other" categories. Always verify if your specific wood species fits the "other" bucket or a more specific one.
💰 3. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (and subsequent imports)
🎯 1. 4409.22.50.90 —— Wood Moulding/Shaping (Solid Wood, Other)
| Item | Content |
|---|---|
| Base Duty | 0.0% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122/China) | +10.0% |
| Total Effective Rate | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No (deny_de_minimis) |
| Legal Path | IEEPA:9903.01.25 → USITC:4409.22.50.90 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- Base duty is 0% due to the nature of the wood product.
- 35% Total is driven by the 25% Section 301 tariff (USITC) and 10% IEEPA tariff (specifically targeting Chinese-origin goods).
- High Risk: This is a high-tariff category. Misclassification can lead to severe penalties.
🎯 2. 4410.19.00.60 & 4410.11.00.60 —— Wood-Based Panels (Particle Board/OSB)
| Item | Content |
|---|---|
| Base Duty | 0.0% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122/China) | +10.0% |
| Total Effective Rate | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No (deny_de_minimis) |
| Legal Path | IEEPA:9903.01.24 → USITC:4410.xxxx.xx.xx → FOOTNOTE:9903.88.01 |
📌 Note:
- Both Particle Board (4410.19) and OSB/Chipboard (4410.11) share the same 35% rate.
- These are engineered wood products, not solid wood mouldings.
🎯 3. 4412.92.42.00 —— Plywood (Specific Category)
| Item | Content |
|---|---|
| Base Duty | 8.0% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122/China) | +10.0% |
| Total Effective Rate | 43.0% |
| Tax Calculation | CIF Value × 43% |
| De Minimis Eligibility | ❌ No (deny_de_minimis) |
| Legal Path | IEEPA:9903.01.25 → USITC:4412.92.42.00 → FOOTNOTE:9903.88.01 |
📌 Warning:
- Plywood is taxed higher (43%) than solid wood moulding (35%) or particle board (35%) because it has an 8% base duty.
- Do not confuse "Plywood" (layered) with "Laminated Wood" (which may have a lower base rate).
🎯 4. 4412.99.91.00 —— Other Plywood/Laminated Wood Products
| Item | Content |
|---|---|
| Base Duty | 5.1% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122/China) | +10.0% |
| Total Effective Rate | 40.1% |
| Tax Calculation | CIF Value × 40.1% |
| De Minimis Eligibility | ❌ No (deny_de_minimis) |
| Legal Path | IEEPA:9903.01.24 → USITC:4412.99.91.00 → FOOTNOTE:9903.88.01 |
📌 Note:
- This code covers "other" laminated wood products. The 40.1% rate is slightly lower than the 43% for specific plywood (4412.92.42.00) due to a lower base duty (5.1% vs 8.0%).
🛠️ 4. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Documentation Checklist (Non-Negotiable)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specifications | ✔️ | Must clearly state: "Wood Moulding/Shaping," dimensions, cross-section shape, and solid wood vs. engineered. |
| ✅ Material Composition Proof | ✔️ | If claiming HS 4409, provide proof it is solid wood, not glued layers (plywood) or chips (particle board). |
| ✅ Product Photos (Clear) | ✔️ | Show the cross-section to prove it is a continuous profile (moulding) and not a flat panel. |
| ✅ Commercial Invoice | ✔️ | Description must match HS Code exactly. E.g., "Solid Wood Skirting Board, Pine, Moulded." |
| ✅ Packing List | ✔️ | Specify net/gross weight and dimensions. |
| ✅ Certificate of Origin (CO) | ✔️ | Essential for verifying Chinese origin to apply the correct 25%/10% surtaxes. |
✅ 2. Declaration Tips (Key Mnemonic)
🔥 "Profile = 4409, Panel = 4410/4412. Base Rate + 35% Surtax!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Solid Wood Baseboard/Trim | 4409.22.50.90 (35%) |
Misdeclare as "Wood Panel" → Risk of audit |
| Particle Board/OSB Sheets | 4410.19.00.60 or 4410.11.00.60 (35%) |
Declare as "Wood Moulding" → Reject/Seize |
| Plywood Sheets | 4412.92.42.00 (43%) or 4412.99.91.00 (40.1%) |
Declare as "Wood Moulding" → High Risk of Penalties |
| Mixed Shipment (Profiles + Panels) | Split declaration | Combine into one line → Customs will split and penalize |
✅ 3. Special Cases Handling
| Scenario | Handling Advice |
|---|---|
| Laminated Wood (Non-Plywood) | If it is not plywood (layers of veneer) but glued solid wood strips, it might still be 4409. If it is veneer layers, it is 4412. |
| Wood vs. Engineered | Customs will cut a sample to check. If you declare "Solid Wood" but it is "Particle Board," you will face fraud penalties. |
| Small Shipments (< $800) | ❌ No De Minimis! All these HS codes are subject to denial of de minimis. Even small parcels are taxed. |
| Origin Fraud | Ensure products are not transshipped via Vietnam/Mexico without proper processing. US Customs closely monitors Chinese wood products. |
🌍 5. Global Main Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 United States | 4409.22.50.90 |
35.0% | No specific cert | Highest Tariff: Base 0% + 25% + 10% |
| 🇨🇳 China | 4409.22.50.90 |
5-10% (Import to CN) | FSC (Optional) | Low import duty to China |
| 🇪🇺 European Union | 4409.22 |
~5-7% | CE (if treated wood) | No 301/122 tariffs |
| 🇬🇧 United Kingdom | 4409.22 |
~5-7% | UKCA | Post-Brexit rules apply |
| 🇦🇺 Australia | 4409.22 |
5% | Phytosanitary Cert. | No major surtaxes |
📌 Conclusion:
- The USA is the most expensive market for wood mouldings/panels due to the 301 (25%) and IEEPA (10%) surtaxes.
- Total 35-43% tariff significantly impacts margin. Consider pricing strategies or supply chain adjustments.
📌 6. Common Errors & Pitfalls Guide (Blood Lessons)
❌ Error 1: Declaring Particle Board as Wood Moulding
👉 Consequence: Customs Rejection. Particle Board is 4410, Moulding is 4409. Different physical forms.
❌ Error 2: Declaring Plywood as Wood Moulding
👉 Consequence: High Penalty. Plywood has a base duty of 8%, Moulding has 0%. Under-declaring tax base leads to audits.
❌ Error 3: Assuming De Minimis ($800) applies
👉 Consequence: Seizure. All these HS codes are explicitly denied de minimis treatment for Chinese goods.
❌ Error 4: Vague Description ("Wood Piece")
👉 Consequence: Customs Query/Delay. Must specify "Moulding," "Profile," or "Panel" and material type.
✅ Correct Declaration Example:
"Solid Wood Moulding, Pine, Cross-section Profile, for Door Frames, Made in China, HS 4409.22.50.90"
🎯 7. Conclusion: Professional Declaration, Time & Cost Saving!
🎯 Remember the Mantra:
🔹 "Solid Profile = 4409 (35%), Panel/Chip = 4410 (35%), Plywood = 4412 (40-43%)."
🔹 "No De Minimis! Every dollar is taxed!"
🔹 "Base + 25% + 10% = Your True Cost!"
📌 Pro Tip:
If your product is laminated wood (not plywood), ensure it is correctly distinguished from plywood (4412) to avoid misclassification.
Recommend Advance Ruling from US CBP if you have a large, consistent shipment, to lock in the HS Code and tariff liability.
📣 Take Action Now:
📞 Contact a licensed Customs Broker + Provide Product Photos + Apply for Pre-Ruling
🚀 Let your wood products clear customs smoothly, avoid seizures, and maximize profit!
✨ Professional Clearance Starts with Precise Classification!
💼 Every cent of tariff should be calculated accurately!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.