检查用医用手套
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4015129000 | 49.0% | CN | US | Official Doc |
| 4015121010 | 110.0% | CN | US | Official Doc |
| 6116109500 | 24.5% | CN | US | Official Doc |
| 6116106500 | 24.5% | CN | US | Official Doc |
| 3926201010 | 10.0% | CN | US | Official Doc |
AI Analysis
🧤 Medical Check-up Gloves (Inspection Gloves)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Know "Medical Check-up Gloves"?
Medical check-up gloves, often referred to as "examination gloves" or "inspection gloves," are single-use protective barriers worn during medical examinations, laboratory procedures, or cosmetic treatments. They are distinct from surgical gloves due to their lower barrier protection requirements and non-sterile nature (usually).
In international trade, their classification depends heavily on material and manufacturing process: 1. Rubber/Latex Gloves: Made from natural or synthetic rubber, often dipped and vulcanized. 2. Plastic/Polymer Gloves: Made from PVC, Nitrile, or PE, often seamless or dipped. 3. Knitted/Coated Gloves: Fabric gloves (knitted/crocheted) that are impregnated, coated, or covered with rubber or plastic to make them waterproof/protective.
⚠️ Key Distinction Point:
- If made of pure rubber/latex without a fabric base → Classified under Chapter 40 (Rubber).
- If made of plastic/PVC/Nitrile via seamless molding or dipping → Classified under Chapter 39 (Plastics) or Chapter 40 depending on specific composition rules.
- If made of knitted fabric with a rubber/plastic coating/impregnation → Classified under Chapter 61 (Knitted Apparel).
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
| HS Code | Product Description | Application Scenario | Material/Structure |
|---|---|---|---|
4015.12.90.00 |
Rubber gloves, for medical/surgical use (other than latex/surgical) | General medical examination, latex-free options | ✅ Vulcanized rubber, non-latex |
4015.12.10.10 |
Rubber gloves, medical/surgical use (specific definition match) | Strictly defined medical rubber gloves | ✅ Consistent with medical rubber definition |
6116.10.95.00 |
Gloves impregnated/coated with rubber/plastics, knitted/crocheted | Fabric-based examination gloves with coating | ✅ Knitted base + Rubber/Plastic coating |
6116.10.65.00 |
Gloves coated/impregnated with rubber/plastics, medical use | Medical-grade coated knit gloves | ✅ Medical use, knitted/coated |
3926.20.10.10 |
Seamless plastic gloves, for inspection/surgical use | Nitrile/PVC seamless gloves, "Check-up" specific | ✅ Seamless plastic/rubber composite |
🔍 Critical Reminder:
- Chapter 40 (4015): Applies to gloves made primarily of vulcanized rubber (natural or synthetic) without a textile backing. - Chapter 61 (6116): Applies to gloves made of textiles (knitted/crocheted) that are impregnated, coated, or covered with rubber/plastic. - Chapter 39 (3926): Applies to plastic articles, including seamless plastic gloves or those where plastic is the primary structural material not classified elsewhere.
💰 III. 2026 Latest Tariff Rate Details (Including Surtaxes, Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Time: 2025/2026 (Current Enforcement)
🎯 1. 4015.12.90.00 —— Rubber Gloves (Non-Surgical/Non-Latex Specific)
| Item | Content |
|---|---|
| Base Tariff | 14.0% |
| Section 301 Surtax | +25.0% |
| Section 122 Surtax | +10.0% |
| Total Tariff | 49.0% |
| Tax Calculation | CIF Value × 49% |
| De Minimis Exemption | ❌ Not Available (High tariff items excluded) |
| Legal Basis Path | USITC:4015.12.90.00 → Section 301 (25%) → Section 122 (10%) |
📌 Explanation:
- Base 14%: Standard MFN rate for rubber gloves. - Section 301 25%: Additional tariff on Chinese goods under Trade Act Section 301. - Section 122 10%: Additional tariff targeting countries with significant trade surpluses with the US. - Total 49%: Very high cost. Requires careful valuation and supplier negotiation.
🎯 2. 4015.12.10.10 —— Medical Rubber Gloves (Specific Definition)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +100.0% |
| Section 122 Surtax | +10.0% |
| Total Tariff | 110.0% |
| Tax Calculation | CIF Value × 110% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | USITC:4015.12.10.10 → Section 301 (100%) → Section 122 (10%) |
📌 Warning:
- 110% Total Tariff: This is an extremely punitive rate. - The 100% Surtax indicates this specific subheading is targeted by specific trade actions (possibly related to medical supply restrictions or specific anti-dumping/countervailing duties combined with Section 301). - Recommendation: Avoid this code if possible. Verify if4015.12.90.00(49%) is more appropriate based on product specifics.
🎯 3. 6116.10.95.00 & 6116.10.65.00 —— Knitted/Coated Gloves
| Item | Content |
|---|---|
| Base Tariff | 7.0% |
| Section 301 Surtax | +7.5% |
| Section 122 Surtax | +10.0% |
| Total Tariff | 24.5% |
| Tax Calculation | CIF Value × 24.5% |
| De Minimis Exemption | ❌ Not Available (Generally, textile apparel faces high scrutiny) |
| Legal Basis Path | USITC:6116.10.65.00/95.00 → Section 301 (7.5%) → Section 122 (10%) |
📌 Note:
- 24.5% Total Tariff: Significantly lower than rubber gloves. - Key Advantage: If the gloves are made of knitted fabric with a coating (e.g., cotton nitrile gloves, fabric-backed latex gloves), this classification is more tariff-efficient. - Condition: Must be genuinely knitted/crocheted textiles with rubber/plastic impregnation/coating.
🎯 4. 3926.20.10.10 —— Seamless Plastic Gloves (Inspection/Surgical)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | 0.0% |
| Section 122 Surtax | +10.0% |
| Total Tariff | 10.0% |
| Tax Calculation | CIF Value × 10% |
| De Minimis Exemption | ❌ Not Available (High value/low weight items often scrutinized) |
| Legal Basis Path | USITC:3926.20.10.10 → Section 122 (10%) |
📌 Best Option for Cost Efficiency:
- 10% Total Tariff: The lowest among all options. - Condition: Must be seamless gloves made primarily of plastic (e.g., PVC, PE, or certain nitrile formulations classified under Chapter 39). - Note: Nitrile gloves are often classified under Chapter 40 if they are pure rubber. If classified under Chapter 39 as "plastic articles," the rate is much lower. Ensure the material composition supports Chapter 39 classification.
🛠️ IV. Customs Clearance Practical Advice (Combat Pitfall Guide)
✅ 1. Preparation Checklist (Essential Documents)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Material (Latex, Nitrile, PVC, Knitted), Thickness, Sterile/Non-sterile, Texture |
| ✅ Material Composition Proof | ✔️ | Lab test report confirming % of rubber/plastic/textile to support HS Code choice |
| ✅ Product Photos | ✔️ | Clear images showing texture, seamlessness (if applicable), and packaging |
| ✅ FDA Registration | ✔️ | For medical gloves, FDA 510(k) or exemption documentation may be required |
| ✅ Commercial Invoice | ✔️ | Accurate description: "Nitrile Examination Gloves, Seamless, Non-Sterile" vs. "Latex Medical Gloves" |
| ✅ Certificate of Origin | ✔️ | To claim any potential exemptions or verify origin for Section 301/122 application |
| ✅ Packaging List | ✔️ | Unit count, carton dimensions, gross/net weight |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Material Dictates Code, Seamless Means Plastic, Knitted Means Textile, Check the Tax!"
| Scenario | Correct Declaration | Wrong Declaration |
|---|---|---|
| Pure Nitrile/Latex Glove | 4015.12.90.00 (14% base) |
3926.20.10.10 (Misclassification risk) |
| Seamless PVC/PE Glove | 3926.20.10.10 (0% base) |
4015.12.90.00 (Higher tax) |
| Cotton Glove with Nitrile Coating | 6116.10.65.00 (7% base) |
4015.12.90.00 (Higher tax) |
| Surgical-Grade Latex Glove | 4015.12.10.10 (⚠️ 100% surtax!) |
Avoid if possible; negotiate with supplier on material |
📌 Critical Strategy:
- If your gloves are Nitrile, confirm if they can be classified under Chapter 39 (3926.20.10.10) as "plastic articles" rather than Chapter 40. This can save 39%-100% in tariffs. - If your gloves are Knitted, ensure the coating/impregnation is dominant to qualify for Chapter 61 (6116), which has a moderate 24.5% total tax.
✅ 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Nitrile vs. Latex | Nitrile may be classified under Chapter 39 or 40. Check with customs broker. Chapter 39 offers 10% total tax. Chapter 40 offers 49%. |
| Sterile vs. Non-Sterile | Sterility does not change HS Code significantly but requires FDA documentation. |
| OEM/White Label | Ensure invoice matches the actual manufacturer’s origin to avoid "Country of Origin" fraud penalties. |
| Bulk vs. Retail | Bulk industrial gloves might have different labeling requirements but same HS Code. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.20.10.10 (if plastic) |
10% | FDA, Section 301/122 apply | 4015.12.10.10 is 110%! |
| 🇪🇺 EU | 4015.19 or 6116.10 |
0% - 4% | CE, REACH | No Section 301/122 |
| 🇨🇳 China | 4015.12 or 6116.10 |
0% - 7% | NMPA | Export from China is tax-free |
| 🇯🇵 Japan | 4015.12 or 6116.10 |
3% - 6% | PMDA | Low tariffs, strict quality |
📌 Conclusion:
- USA Tariff Arbitrage: If possible, classify gloves under Chapter 39 (3926.20.10.10) to pay only 10% instead of 49% or 110%. - Avoid4015.12.10.10: Unless absolutely necessary, this code carries a 110% tariff burden.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring Nitrile Gloves as 4015.12.90.00 when they can be 3926.20.10.10
👉 Consequence: Pay 49% instead of 10%. Overpayment of 39%!
❌ Error 2: Declaring Knitted Coated Gloves as 4015.12.90.00
👉 Consequence: Pay 49% instead of 24.5%. Overpayment of 24.5%!
❌ Error 3: Using 4015.12.10.10 for general medical gloves
👉 Consequence: Pay 110% tariff. Financial disaster.
❌ Error 4: Ignoring Section 122 and Section 301 in total cost calculation
👉 Consequence: Budget shortfalls. Total tax is not just the MFN rate.
✅ Correct Practice:
"Nitrile Examination Gloves, Seamless, Non-Sterile, Blue, Powder-Free, Box of 100, Model: NEX-100, FDA Registered"
🎯 VII. Conclusion: Professional Classification Saves Money!
🎯 Remember the Mantras:
🔹 "Plastic Seamless = 10% Tax; Knitted Coated = 24.5% Tax; Rubber = 49% or 110%!"
🔹 "Nitrile can be Chapter 39! Check the material sheet!"
🔹 "Section 122 + Section 301 = Total Tax Reality!"
📌 Pro Tip:
If your gloves are Nitrile, work with your supplier to confirm if they can be classified under HS 3926.20.10.10 (Plastic Articles) for a 10% total tariff. This is a major cost-saving opportunity compared to 4015.12.90.00 (49%) or 4015.12.10.10 (110%).
Always request a Pre-Ruling from CBP if the classification is ambiguous.
📣 Immediate Action:
📞 Contact your customs broker with Material Composition Reports.
🚀 Optimize your HS Code to 3926.20.10.10 or 6116.10.65.00 to maximize profit margins.
✨ Professional Clearance Starts with Accurate Classification!
💼 Every percentage point saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.