横向工牌套配挂绳（2件装）
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326200090 | 88.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 5609004000 | 38.9% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 5609003000 | 39.5% | CN | US | Official Doc |
AI Analysis
🆔 Horizontal ID Badge Holder with Lanyard (2-Pack)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Cross-Border Trade
📌 I. Product Definition & Classification: Do You Really Understand "ID Badge with Lanyard"?
A horizontal ID badge holder paired with a lanyard is a common promotional or corporate accessory. However, in international trade, its classification depends heavily on the primary material and function. Customs authorities often scrutinize these items because they can fall under metal, plastic, or textile categories, leading to drastically different tax liabilities.
Key Classification Scenarios: 1. Metal Component Dominance: If the holder is metal (steel/iron) and the lanyard is secondary → Chapter 73 (Iron/Steel Articles). 2. Plastic/Textile Dominance: If the holder is plastic or fabric, and the lanyard is synthetic → Chapter 56 (Textile/Rope) or Chapter 39 (Plastics). 3. The "Accessories" Trap: Misclassifying as simple parts can lead to the highest penalty rates.
⚠️ Critical Distinction Point:
- If the badge holder is metal and attached to a lanyard → Often viewed as a steel article (High Tax).
- If the badge holder is plastic/fabric → Viewed as textile/plastic articles (Lower Tax).
- Do not assume "accessories" allows for a single low-rate code without material verification.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the five potential HS Codes derived from material inference logic. Note that the tax rate varies significantly (from 22.8% to 89.5%).
| HS Code | Product Description | Material Inference | Key Classification Logic |
|---|---|---|---|
| 7326.20.00.90 | Other articles of iron or steel | Metal (Iron/Steel) | Inferred as metal制品; fits "other iron/steel articles". No conflict with metal wire/steel wire structure. |
| 7326.90.86.88 | Other articles of iron or steel | Metal (Iron/Steel) | "Other" category fallback. If material is steel but not explicitly wire, this兜底 (catch-all) code applies. |
| 5609.00.40.00 | Other articles of yarn, string, cord, rope or twine | Synthetic Fibers | Inferred material: 5404/5405 class synthetic fibers. Fits "other rope/cord articles". |
| 3926.90.99.89 | Other articles of plastics and articles of other materials of headings 3901 to 3914 | Plastic/Synthetic | Matches plastic or synthetic fiber material range. No obvious conflict with "other articles". |
| 5609.00.30.00 | Other articles of yarn, string, cord, rope or twine | Artificial Fibers | Form fits "banding/strip"; Material inferred as artificial fiber (e.g., Polyester/Nylon). Consistent with banded articles. |
🔍 Priority Analysis:
- Highest Risk/Tax: 7326.20.00.90 & 7326.90.86.88 (Metal). If your product has a metal clip or metal frame, customs may force this classification. - Lowest Tax: 3926.90.99.89 (Plastic). If the badge holder is pure plastic and the lanyard is plastic, this is the most cost-effective code. - Middle Ground: 5609 codes (Textile). If the lanyard is the dominant feature and the holder is small fabric/plastic, these may apply, but are riskier than plastic codes.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharge)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Post-November 10, 2025 (Including subsequent imports)
🎯 1. 7326.20.00.90 & 7326.90.86.88 —— Iron/Steel Articles (High Risk)
| Item | Content |
|---|---|
| Basic Tariff | 3.9% (for 7326.20) / 2.9% (for 7326.90) |
| Section 301 Surcharge | +25.0% (USITC Footnote 9903.88.01) |
| Section 122/IEEPA Surcharge | +10% (Steel, Aluminum, Copper Products Surcharge) |
| Total Tax Rate | ~89.5% (for 7326.20) / ~88.5% (for 7326.90) |
| Tax Calculation | CIF Value × ~89% |
| De Minimis Exemption? | ❌ NO (Strictly Denied) |
| Legal Path | Section 301: 9903.01.25 → Section 122: 10% Steel Surcharge → USITC: 7326.xx |
📌 Explanation:
- If the badge holder contains any significant metal component (e.g., metal clip, metal frame), US Customs may classify it as "Iron/Steel Article." - The 10% Section 122 tariff applies specifically to steel/aluminum products. - Combined with 25% Section 301, the total tax exceeds 89%. This makes importing metal badge holders from China to the US extremely expensive.
🎯 2. 5609.00.40.00 & 5609.00.30.00 —— Textile/Rope Articles (Medium Risk)
| Item | Content |
|---|---|
| Basic Tariff | 3.9% (for 5609.40) / 4.5% (for 5609.30) |
| Section 301 Surcharge | +25.0% |
| Section 122 Surcharge | N/A (Not steel/aluminum) |
| Total Tax Rate | ~38.9% (for 5609.40) / ~39.5% (for 5609.30) |
| Tax Calculation | CIF Value × ~39% |
| De Minimis Exemption? | ❌ NO (Standard Section 301 applies) |
| Legal Path | Section 301: 9903.01.25 → USITC: 5609.xx |
📌 Note:
- These codes apply if the product is considered "other articles of yarn/string/rope." - Suitable if the lanyard is the primary functional component and the badge holder is minor fabric/plastic. - Tax is significantly lower than metal codes, but still high due to 25% Section 301.
🎯 3. 3926.90.99.89 —— Plastic Articles (Lowest Tax in Dataset)
| Item | Content |
|---|---|
| Basic Tariff | 5.3% |
| Section 301 Surcharge | +7.5% (Note: Data shows 7.5% for this code, possibly due to specific exclusions or different 301 list version) |
| Section 122 Surcharge | N/A |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value × 22.8% |
| De Minimis Exemption? | ❌ NO |
| Legal Path | Section 301: 9903.01.25 (or applicable footnote) → USITC: 3926.90 |
📌 Advantage:
- If the product is entirely plastic (holder + lanyard), this code offers the lowest total tax rate (22.8%). - Crucial: You must prove no metal parts are present or that metal parts are de minimis/non-functional.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
✅ 1. Documentation Checklist (Missing Any Will Delay Clearance)
| Document | Required? | Explanation |
|---|---|---|
| ✅ Product Photos | ✔️ | High-res images showing material texture (plastic vs. metal). Show the clip/holder close-up. |
| ✅ Material Specification Sheet | ✔️ | Explicitly state: "Holder: PVC/ABS Plastic; Lanyard: Polyester; No Metal." |
| ✅ Commercial Invoice | ✔️ | Description: "Plastic ID Badge Holder with Polyester Lanyard, 2-Pack." Avoid vague terms like "Metal Accessories." |
| ✅ Packing List | ✔️ | Clearly list quantity and weight. |
| ✅ Bill of Lading/Air Waybill | ✔️ | Standard shipping docs. |
✅ 2. Declaration Strategy (Key Mantra)
🔥 "Material is King! Plastic Wins, Metal Kills!"
| Scenario | Correct Declaration | Wrong Action |
|---|---|---|
| All Plastic | 3926.90.99.89 |
Declaring as "Metal Badge Holder" → 89% Tax |
| Metal Clip + Plastic Holder | Consult Customs Ruling. May still fall under 7326 if metal is significant. |
Ignoring metal part → Audit Risk |
| Textile Lanyard + Plastic Holder | Prefer 3926.90.99.89 (Plastic dominant) over 5609 unless textile is main feature. |
Declaring as "Steel Article" → 89% Tax |
| Generic "Badge Holder" | Specify "Plastic" in name. | Vague description → Customs forces highest applicable rate |
✅ 3. Special Handling Tips
| Situation | Recommendation |
|---|---|
| OEM Customization | Ensure molds/materials are documented. If metal clips are added, expect higher taxes. |
| Mixed Materials | If <5% metal by weight/value, argue for plastic classification, but provide proof. |
| Pre-Ruling Request | Highly recommended! Submit a Binding Ruling Request to US CBP with photos before shipment to confirm 3926 eligibility. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Key Certification | Note |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.90.99.89 |
22.8% (Plastic) | N/A | Avoid Metal Codes (7326) at 89%! |
| 🇨🇳 China | 3926.90.99.89 |
~5% | N/A | Low tax, easy entry. |
| 🇪🇺 EU | 3926.90.99.89 |
~4-6% | CE (if applicable) | No Section 301 surcharge. |
| 🇬🇧 UK | 3926.90.99.89 |
~4-6% | UKCA | Post-Brexit rules apply. |
📌 Conclusion:
- USA is the most challenging market due to Section 301 + Section 122 tariffs on steel. - Plastic classification (3926) is the optimal strategy for cost-saving, provided no metal components are present. - Metal classification (7326) should be avoided unless the product is genuinely metal, as it incurs ~89% tax.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Assuming "Badge Holder" is always plastic.
👉 Consequence: If a metal clip is found, customs reclassifies to 7326, charging 89% tax retroactively.
❌ Mistake 2: Using vague descriptions like "Office Supplies."
👉 Consequence: Customs assigns highest duty rate automatically due to lack of material specification.
❌ Mistake 3: Ignoring Section 122 (Steel Surcharge).
👉 Consequence: Even if Section 301 is 25%, the additional 10% for steel makes it prohibitive.
✅ Correct Practice:
"Plastic Horizontal ID Badge Holder with Polyester Lanyard, 2-Pack. Material: PVC Holder, Nylon Lanyard. No Metal Components."
🎯 VII. Conclusion: Professional Declaration Saves Money!
🎯 Remember the Mantra:
🔹 "Plastic is Cheap (22.8%), Metal is Expensive (89%)."
🔹 "Specify Material, Avoid Metal, Save Tax Dollars."
🔹 "HS Code Defines Profit, One Mistake Costs 65% More!"
📌 Pro Tip:
- If your product has any metal, consider sourcing from Vietnam/Malaysia to avoid Section 301/122 tariffs.
- Apply for an Advance Ruling with US CBP if unsure about mixed materials.
- Clearly state "Plastic" and "No Metal" on all commercial invoices.
📣 Immediate Action:
📞 Verify Material Composition with Supplier
📄 Update Product Descriptions to emphasize Plastic/Synthetic
🚀 Optimize for HS Code 3926.90.99.89 for Maximum Profit!
✨ Professional Clearance, Starting with Accurate Classification!
💼 Your Every Penny Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.