橡胶工业手套
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6116109500 | 24.5% | CN | US | Official Doc |
| 4015195100 | 49.0% | CN | US | Official Doc |
| 4015191150 | 38.0% | CN | US | Official Doc |
| 6116106500 | 24.5% | CN | US | Official Doc |
| 3926204050 | 16.5% | CN | US | Official Doc |
Product Images
AI Analysis
🧤 Rubber Industrial Gloves: HS Code Classification & Customs Clearance Strategy (2026)
🌐 HS Code Reference & Customs Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Rubber Industrial Gloves"?
Rubber Industrial Gloves (specifically Agricultural/Industrial Use) are protective equipment made from natural or synthetic rubber, designed to protect hands from chemicals, moisture, and mechanical damage. In international trade, the classification depends heavily on the manufacturing process (knitted vs. molded/sulfurized) and the specific material composition.
International trade distinguishes between two main categories:
Knitted/Hooked Gloves with Rubber Coating (Chapter 61):
Gloves made of fabric that is knitted or hooked, then dipped, coated, or covered with rubber. These retain the textile structure.
Molded/Sulfurized Rubber Gloves (Chapter 40):
Gloves made entirely of sulfurized rubber (vulcanized), shaped by molding. They are considered articles of rubber, not textiles.
⚠️ Key Distinction Point:
- If the base material is knitted fabric (even if fully covered in rubber) → Falls under 6116 (Textile apparel).
- If the base material is solid molded rubber (no fabric structure) → Falls under 4015 (Rubber apparel).
- ⚠️ Note: Some HS codes in the provided data suggest cross-category ambiguity due to specific material definitions or trade policy interpretations (e.g., treating certain rubber gloves as plastic/chemical products under 3926).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Mapping)
Based on the provided dataset, here are the five possible classifications for Rubber Agricultural/Industrial Gloves, ranging from 16.5% to 49.0% total tax.
| HS Code | Product Description | Classification Logic | Total Tax Rate |
|---|---|---|---|
3926.20.40.50 |
Rubber gloves, classified under plastic/chemical goods consistency | Although made of rubber, classified as plastic/glove-type goods due to high consistency with plastic articles in certain trade contexts. | 16.5% |
6116.10.95.00 |
Rubber agricultural gloves, knitted/hooked base | Base is knitted/hooked, coated with rubber. Fits "Plastic/Rubber coated knitted gloves" category. | 24.5% |
6116.10.65.00 |
Rubber gloves, dipped/coated characteristics | Similar to above, emphasizes the dipping/coating process on a textile base. Reasonable inference of rubber impregnation. | 24.5% |
4015.19.11.50 |
Sulfurized rubber gloves (specific sub-category) | Pure sulfurized rubber, no textile base. Specific limit for "Sulfurized rubber apparel/accessories." | 38.0% |
4015.19.51.00 |
Sulfurized rubber gloves (General) | General category for "Clothing accessories of sulfurized rubber." High tariff due to broader classification. | 49.0% |
🔍 Key Reminder:
- Lowest Tax Option:3926.20.40.50(16.5%) is the most favorable if the product structure allows classification as a "plastic-like" glove, though this is technically a rubber product. This requires strong justification of material consistency. - Highest Tax Option:4015.19.51.00(49.0%) applies to standard sulfurized rubber gloves without specific sub-categorization benefits. - Middle Ground: Knitted-based gloves (6116.10.xxxx) attract 24.5%, balancing between textile and rubber characteristics.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Current tariffs include Section 301 (122 clauses) and Base Tariffs.
🎯 1. 3926.20.40.50 —— The "Plastic-Like" Rubber Glove (Lowest Rate)
| Item | Content |
|---|---|
| Base Tariff | 6.5% (Ad Valorem) |
| Surtax (Section 301) | 0.0% (Exempted or zeroed in this specific sub-heading context) |
| 122 Clause Tariff | 10% (Specific China-specific surcharge) |
| Total Tax Rate | 16.5% |
| Tax Calculation | CIF Value × 16.5% |
| De Minimis Exemption | ❌ Not Available (Deny de_minimis for this category) |
| Legal Basis Path | USITC:3926.20.40.50 → 122 Clause: 10% |
📌 Explanation:
- This classification treats the rubber glove as consistent with plastic articles, avoiding the higher Section 301 surtax typically applied to rubber apparel. - Critical: This is the most cost-effective option but requires proving the product's material properties align with "plastic/glove" consistency rather than standard rubber apparel.
🎯 2. 6116.10.95.00 & 6116.10.65.00 —— Knitted Rubber-Coated Gloves (Mid-Range Rate)
| Item | Content |
|---|---|
| Base Tariff | 7.0% (Ad Valorem) |
| Surtax (Section 301) | 7.5% (Applied to knitted/textile-based rubber goods) |
| 122 Clause Tariff | 10% |
| Total Tax Rate | 24.5% |
| Tax Calculation | CIF Value × 24.5% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | USITC:6116.10.xxxx → Section 301: 7.5% → 122 Clause: 10% |
📌 Explanation:
- These codes apply to gloves where the base structure is knitted or hooked fabric, even if fully coated in rubber. - The 7.5% surtax reflects the additional trade barrier on textile-based rubber products. - Common Use: Agricultural gloves, light industrial cleaning gloves.
🎯 3. 4015.19.11.50 —— Sulfurized Rubber Gloves (Specific Sub-Category)
| Item | Content |
|---|---|
| Base Tariff | 3.0% (Ad Valorem) |
| Surtax (Section 301) | 25.0% (High surtax for pure rubber apparel) |
| 122 Clause Tariff | 10% |
| Total Tax Rate | 38.0% |
| Tax Calculation | CIF Value × 38.0% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | USITC:4015.19.11.50 → Section 301: 25% → 122 Clause: 10% |
📌 Explanation:
- For pure sulfurized rubber gloves (no fabric base), the base tariff is low (3.0%), but the Section 301 surtax is high (25%). - This applies to heavy-duty industrial gloves, chemical-resistant gloves.
🎯 4. 4015.19.51.00 —— General Sulfurized Rubber Gloves (Highest Rate)
| Item | Content |
|---|---|
| Base Tariff | 14.0% (Ad Valorem) |
| Surtax (Section 301) | 25.0% |
| 122 Clause Tariff | 10% |
| Total Tax Rate | 49.0% |
| Tax Calculation | CIF Value × 49.0% |
| De Minimis Exemption | ❌ Not Available |
| Legal Basis Path | USITC:4015.19.51.00 → Section 301: 25% → 122 Clause: 10% |
📌 Explanation:
- This is the worst-case scenario for pure rubber gloves. - Both base tariff and surtax are high. Avoid this classification unless the product cannot be reasonably classified under other more favorable sub-headings.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Preparation Checklist (Non-Negotiable)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must detail material (Natural/Synthetic Rubber, Latex, Nitrile), thickness, coating type. |
| ✅ Material Composition Report | ✔️ | Proof of whether there is a knitted fabric base (for 6116) or pure rubber (for 4015). |
| ✅ Product Photos | ✔️ | Clear images of the inner lining (if any) to prove knitted vs. molded structure. |
| ✅ Commercial Invoice | ✔️ | Must explicitly state "Rubber Agricultural Gloves" or "Sulfurized Rubber Gloves." |
| ✅ Packing List | ✔️ | Detail packaging to avoid mixed-mode classification. |
| ✅ Origin Certificate (CO) | ✔️ | To verify China origin and apply correct surtaxes. |
✅ 2. Declaration Strategy (Key Mantras)
🔥 "Structure Dictates Code, Fabric Means 6116, Pure Rubber Means 4015, Plastic Consistency Saves Money!"
| Scenario | Correct Declaration | Wrong Practice | Consequence |
|---|---|---|---|
| Knitted base, rubber coated | 6116.10.95.00 or 6116.10.65.00 |
Claim as "Pure Rubber" | Overpay tax? No, under-declare → Penalty + Back Tax |
| Pure molded rubber | 4015.19.11.50 |
Claim as "Plastic" | Misclassification → 49% Tax or Fraud Investigation |
| High-quality Rubber Glove | 3926.20.40.50 (if justified) |
Use standard 4015 |
Missed Savings: 16.5% vs 38-49% |
| Mixed Packing | Separate HS Codes | Single HS for mixed goods | Confiscation or Heavy Fine |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Nitrile vs. Latex | Both can fall under 6116 (if knitted) or 4015 (if molded). Ensure material report specifies "Synthetic Rubber" if claiming plastic consistency. |
| OEM Custom Gloves | Provide design specs. If the OEM design includes a fabric liner, must use 6116 codes. |
| "Plastic-Like" Argument | To use 3926.20.40.50, you must argue that the rubber gloves have structural and functional consistency with plastic gloves (e.g., thin, molded, non-textile base but treated as plastic goods in trade). This is aggressive and requires legal backing. |
| Agricultural vs. Industrial | The dataset labels them "Agricultural," but customs focus on material and construction. Use "Industrial/Chemical Resistant" in description if applicable, but keep HS code consistent with material. |
🌍 V. Global Market Clearance Comparison (2026)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3926.20.40.50 |
16.5% | No specific FDA/CE needed for generic gloves | Best Rate. Avoid 4015.19.51.00 (49%). |
| 🇨🇳 China | 4015.19.11.00 |
~5-10% | No special cert | Base tariff low, no surtax. |
| 🇪🇺 EU | 4015.19.90 |
~4.5% | REACH, CE (if PPE) | No Section 301 surtax. |
| 🇬🇧 UK | 4015.19.90 |
~4.5% | UKCA, REACH | Post-Brexit rules apply. |
| 🇦🇺 Australia | 4015.19.90 |
~5% | GEMS, RCM | No major surtax. |
📌 Conclusion:
- The US market is the most complex due to the 122 Clause and Section 301 surtaxes. - Strategic Priority: Aim for3926.20.40.50(16.5%) if the product structure allows, as it saves 22-32.5% compared to other rubber glove classifications. - Fallback: If not possible,6116codes (24.5%) are significantly better than4015codes (38-49%).
📌 VI. Common Errors & Pitfalls (Blood & Tears Lessons)
❌ Error 1: Declaring "Rubber Gloves" under 4015.19.51.00 when they have a knitted liner.
👉 Consequence: You might get away with it temporarily, but if audited, you could be forced to pay the difference or face penalties for misclassification. Also, you miss the chance to argue for 6116 or 3926.
❌ Error 2: Claiming 3926.20.40.50 for standard thick rubber gloves without justification.
👉 Consequence: Customs may reject the "plastic consistency" argument, leading to reclassification at 38-49% + penalties. Use only if material analysis supports it.
❌ Error 3: Ignoring the "122 Clause" surtax.
👉 Consequence: All these codes include a 10% additional tariff. Forgetting this leads to sudden cost spikes. Always budget for 10% extra.
❌ Error 4: Mixing "Agricultural" and "Industrial" claims without proof.
👉 Consequence: If customs determine the gloves are for chemical handling (not agriculture) but declared as agricultural, they may reclassify under stricter PPE codes.
✅ Correct Practice:
"Rubber-Coated Knitted Gloves, Chemical Resistant, Model XYZ, 100% Natural Rubber Coating on Cotton Knit Base, Intended for Agricultural Use"
🎯 VII. Conclusion: Professional Declaration Saves Money!
🎯 Remember the Mantra:
🔹 "Knitted Base? Use 6116 (24.5%). Pure Rubber? Check 3926 (16.5%) or 4015 (38-49%). Avoid 4015.19.51.00 at all costs!"
🔹 "HS Code determines tax, 16.5% vs 49% is a 32.5% difference, one wrong code costs thousands!"
📌 Tips:
- If your gloves are made of Nitrile or Latex, ensure the material report specifies "Synthetic Rubber" or "Natural Rubber" to support the 3926 or 4015 classification.
- Request an Advance Ruling (Pre-classification) from US CBP if the classification between 3926 and 6116/4015 is ambiguous.
- Negotiate with Suppliers: Ask them to provide gloves with a knitted base if possible, to leverage the 6116 code, or argue for 3926 if the product is truly molded but behaves like plastic.
📣 Immediate Action:
📞 Consult a licensed customs broker + Provide Material Spec Sheet + Apply for HS Code Advance Ruling
🚀 Let your rubber gloves clear smoothly, reduce costs, and maximize profit!
✨ Professional Customs Clearance Starts with Precise Classification!
💼 Every penny of tax is worth calculating precisely!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.