泡沫切割笔
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8467290085 | 17.5% | CN | US | Official Doc |
| 8509805095 | 14.2% | CN | US | Official Doc |
| 8509801000 | 10.0% | CN | US | Official Doc |
| 8205598000 | 38.7% | CN | US | Official Doc |
AI Analysis
✂️ Foam Cutting Pen (泡沫切割笔)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategies
📌 1. Product Definition & Classification: Do You Really Understand the "Foam Cutting Pen"?
The Foam Cutting Pen is a specialized handheld tool primarily used for shaping, carving, and detailing various types of foam materials (such as Styrofoam, EVA foam, PU foam) in crafts, model making, and industrial packaging. In international trade, its classification hinges on power source and material composition.
Key Distinction Points:
Electric/Heated Models: If the pen uses an electric heating element to melt/cut foam, it falls under Chapter 84 (Hand Tools/Electric Tools).
* Non-Heated/Blade-Only Models: If it is purely mechanical (manual), it may fall under Chapter 82 (Hand Tools) or Chapter 85 (Electrical Machines) depending on specific structural features, though Chapter 82 is most common for manual blades.
* Material Specificity: The target material (Polymer/Foam) influences the summary but does not solely determine the HS Code; the function (cutting) and power* (electric vs. manual) are decisive.
📦 2. HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Tax Category | Primary Classification Logic |
|---|---|---|---|
8509.80.50.95 |
Electric/Other Appliances: Foam cutting pen classified under "Other appliances" in electrical tools. Material: Foam (Polymer/Plastic). | 14.2% | Base: 4.2%, Addl: 0%, Sec 301: 10% |
8467.29.00.85 |
Hand Tools (Electric/Heated): Hand-held tools with cutting function, electric or heated. | 17.5% | Base: 0%, Addl: 7.5%, Sec 301: 10% |
8509.80.10.00 |
Other Appliances (Low Tax): Fits "Other appliances" category with tool attributes. Material: Polymer/Foam. | 10.0% | Base: 0%, Addl: 0%, Sec 301: 10% |
8205.59.80.00 |
Manual Tools: Manual tools, material: Metal/Plastic composite, purpose: Cutting. | 38.7% | Base: 3.7%, Addl: 25%, Sec 301: 10% |
🔍 Critical Note:
The choice between8467(Electric Hand Tools) and8509(Other Electrical Appliances) depends on whether the device is primarily a "tool" for processing materials (84) or an "appliance" for general utility (85).
The choice between8205(Manual) and others depends on whether the device has any electrical component. If it's purely manual,8205applies, but beware of the 38.7% total tax.
💰 3. 2026 Latest Tariff Rate Details (Including Surtaxes)
✅ Applicable Country: United States (US)
✅ Origin: China (CN) (Implied by "Section 301" and "10% surtax" typical of US-China trade data)
✅ Effective Time: Current US Trade Policies (Section 301 & IEEPA provisions)
🎯 1. 8509.80.50.95 —— Other Electrical Appliances (Higher Base)
| Item | Detail |
|---|---|
| Base Duty | 4.2% |
| USITC Surtax (Section 301) | 0.0% |
| IEEPA/Section 301 Surcharge | +10% |
| Total Tax Rate | 14.2% |
| Tax Calculation | CIF Value × 14.2% |
| De Minimis Exemption | ❌ Not Eligible (Likely subject to scrutiny if under $800, but structure suggests commercial import) |
| Legal Basis | USITC: 8509.80.50.95 + Section 301 List 3/4 provisions |
📌 Explanation:
This code applies if the pen is classified as an "electrical appliance" rather than a "hand tool." The 4.2% base duty is moderate, but the 10% surcharge is mandatory for Chinese origin.
🎯 2. 8467.29.00.85 —— Electric/Heated Hand Tools (High Surtax)
| Item | Detail |
|---|---|
| Base Duty | 0.0% |
| USITC Surtax (Section 301) | +7.5% |
| IEEPA/Section 301 Surcharge | +10% |
| Total Tax Rate | 17.5% |
| Tax Calculation | CIF Value × 17.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | USITC: 8467.29.00.85 + Section 301 provisions |
📌 Explanation:
This is the most accurate classification for heated/electric foam cutters. While the base duty is 0%, the 7.5% Section 301 surtax + 10% additional surcharge raises the effective cost. This is the standard commercial classification for powered cutting tools.
🎯 3. 8509.80.10.00 —— Other Appliances (Lowest Total Tax)
| Item | Detail |
|---|---|
| Base Duty | 0.0% |
| USITC Surtax (Section 301) | 0.0% |
| IEEPA/Section 301 Surcharge | +10% |
| Total Tax Rate | 10.0% |
| Tax Calculation | CIF Value × 10.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | USITC: 8509.80.10.00 + Section 301 provisions |
📌 Explanation:
This code offers the lowest total tariff (10%). It applies if the device can be argued as an "electrical appliance" that is not strictly a "hand tool" under Chapter 84. Strategy: If the device has complex controls or is marketed as a "craft appliance" rather than a "tool," this code is optimal.
🎯 4. 8205.59.80.00 —— Manual Tools (Highest Risk/Tax)
| Item | Detail |
|---|---|
| Base Duty | 3.7% |
| USITC Surtax (Section 301) | +25% |
| IEEPA/Section 301 Surcharge | +10% |
| Total Tax Rate | 38.7% |
| Tax Calculation | CIF Value × 38.7% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis | USITC: 8205.59.80.00 + Section 301 provisions |
📌 Warning:
This code applies to purely manual foam cutters (e.g., hot wire handles without power supply, or mechanical blade pens). DO NOT USE if your product has any electrical component, even a small battery. The 38.7% rate is punitive. Also, misclassifying an electric tool as manual can lead to penalties and fraud accusations.
🛠️ 4. Customs Clearance Practical Advice (Avoid Pitfalls)
✅ 1. Preparation Checklist (Essential Documents)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specs Sheet | ✔️ | Must specify: Power source (Electric/Manual), Voltage, Heating Element Type, Material (Foam/Polymer). |
| ✅ Technical Diagrams | ✔️ | Show internal circuitry if electric. Proves it's not "simple machinery." |
| ✅ Clear Photos | ✔️ | Front, back, power adapter (if any), and the cutting tip. |
| ✅ Material Declaration | ✔️ | Specify if foam is Polyethylene, Polyurethane, etc. |
| ✅ Commercial Invoice | ✔️ | Clearly state "Foam Cutting Pen, Electric/Heated, Model XYZ" |
| ✅ Origin Certificate | ✔️ | For US imports, confirm CN origin to apply accurate surcharges. |
✅ 2. Declaration Strategy (Key Mnemonic)
🔥 "Electric = 84/85, Manual = 82. Check Power, Avoid 38%!"
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Electric/Heated Pen | 8467.29.00.85 (17.5%) OR 8509.80.10.00 (10%) |
Best for powered devices. Choose 8509 if possible for lower tax, but justify as "appliance." |
| Purely Manual Blade | 8205.59.80.00 (38.7%) |
Only if 100% mechanical. High tax, but accurate. |
| Kit (Pen + Blades) | Same as Pen | The pen is the essential component. Declare as one item. |
| Replacement Blades Only | 8205.59.80.00 or 8509.80.xxxx |
Depends on material. Usually treated as parts. |
✅ 3. Special Case Handling
| Situation | Advice |
|---|---|
| Battery-Powered | Still falls under 8467 or 8509. Do not classify as "battery" (Chapter 85). |
| Heating Wire Type | If it uses a resistive heating wire, it's "Electric." Classify under 8467 or 8509. |
| Misclassification Risk | Declaring an electric pen as 8205 (Manual) to avoid surtax is high-risk. Customs can inspect and reclassify, leading to back taxes + penalties. |
| De Minimis ($800) | Even if under $800, Section 301 duties may apply if the carrier reports properly. However, for commercial shipments, always pay the correct duty. |
🌍 5. Global Market Comparison (2026)
| Region | Recommended HS Code | Est. Total Tax (China Origin) | Certification |
|---|---|---|---|
| 🇺🇸 USA | 8467.29.00.85 or 8509.80.10.00 |
10% - 17.5% | FCC (if electric), UL |
| 🇪🇺 EU | 8205.59 or 8467.29 |
0% - 4.2% | CE, RoHS |
| 🇨🇳 China | 8467.29 |
0% - 7% | CCC (if applicable) |
📌 Conclusion:
The US market has significant tariff variations based on classification.8509.80.10.00(10%) is the most cost-effective if defensible.8467(17.5%) is the safest standard for electric tools. Avoid8205(38.7%) unless truly manual.
📌 6. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring an electric heated pen as 8205 (Manual)
👉 Consequence: 38.7% tax vs. 10-17.5%. Wasted money. Plus, risk of audit if power adapter is found.
❌ Error 2: Declaring as "Cutting Machine" (Chapter 84/85 other codes)
👉 Consequence: Wrong subheading, leading to classification dispute and delays.
❌ Error 3: Ignoring Section 301 Surcharge
👉 Consequence: Underpayment by 10% on all codes. Customs will assess back duties + interest.
✅ Correct Practice:
"Foam Cutting Pen, Electric, Heated Wire, 120V/60Hz, Model XYZ, for Polystyrene Foam"
🎯 7. Conclusion: Professional Declaration, Cost Optimization!
🎯 Remember the Mnemonic:
🔹 "Electric = 10-17.5% (Choose 8509 if possible), Manual = 38.7% (Avoid)! "
🔹 "HS Code is King, 10% vs 38% is Huge, Correct Declaration Saves Cash!"
📌 Pro Tip:
If your product is OEM/custom, provide detailed specs to Customs Broker. Consider applying for an Advance Ruling if importing large volumes, to lock in the 8509.80.10.00 (10%) rate if applicable.
📣 Immediate Action:
📞 Contact your Customs Broker with Product Specs + Photos.
🚀 Optimize for8509.80.10.00if possible, settle for8467.29.00.85if not. NEVER misclassify electric as manual.
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent Saved is Profit Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.