Processing...

Thinking...

AI is analyzing your product

60s

涂布纸 (HS 4811909035)

CN → US
HS Code Tariff Rate Origin Destination Doc
4811512050 35.0% CN US Official Doc
4811512030 35.0% CN US Official Doc
4811411000 35.0% CN US Official Doc
4811412100 35.0% CN US Official Doc
4811909035 35.0% CN US Official Doc

AI Analysis

📜 Coated Paper (HS Code: 4811.90.90.35)


🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand “Coated Paper”?

Coated paper is a versatile printing and packaging material produced by applying a layer of mineral pigments, polymers, or other substances to the surface of base paper. In international trade, it is primarily categorized based on its surface treatment, plastic coating, and adhesive properties.

For the specific HS Code 4811.90.90.35, we must look at the provided data to understand why it might be confused with or compared to other subheadings, although 4811.90.90.35 is NOT explicitly listed in the provided <DATA>. However, the prompt asks to explain the codes in <DATA> for the input "Coated Paper".

⚠️ Critical Clarification:
The user input "Coated Paper (HS 4811909035)" points to a generic coated paper code. However, the <DATA> provided contains four specific HS codes (4811.51.20.50, 4811.51.20.30, 4811.41.10.00, 4811.41.21.00) with identical tax rates (35%).

Since the prompt asks to explain why it is classified into the HS codes in <DATA>, and the input is a general "Coated Paper", we will analyze the four specific codes provided in <DATA> as potential classifications for different types of coated paper, highlighting their distinctions. If the user strictly means 4811.90.90.35, it falls outside the provided JSON data. The following analysis focuses strictly on the 4 HS Codes provided in <DATA>, as per the constraint "Do not exceed <DATA> content".


📦 II. HS Code Classification Details (Based on Provided <DATA>)

The following table details the four specific classifications for coated paper found in the data. All share the same total tax rate, but differ in physical form and specific attributes.

HS Code Product Description (From Data) Key Characteristics Plastic Coating? Self-Adhesive?
4811.51.20.50 Coated paper, material is bleached paper or cardboard coated, impregnated, or covered with plastic. Fully matches plastic-coated bleached paper/board morphology. ✅ Yes ❌ No
4811.51.20.30 Coated paper, material is paperboard coated, impregnated, or covered with plastic. Belongs to the category of base paper/board. ✅ Yes ❌ No
4811.41.10.00 Coated paper, belongs to paper products, possesses self-adhesive properties. Fits the classification of self-adhesive tape form. ❌ No (Adhesive) ✅ Yes
4811.41.21.00 Coated paper, material is paper coated, impregnated, covered, colored, decorated, or printed. Meets detailed item requirements for coated/printed paper. ⚠️ Possible (varies) ❌ No

🔍 Key Distinction:
- 4811.51.20.30/50: Focus on Plastic Coating (Laminated/Impregnated).
- 4811.41.10.00: Focus on Self-Adhesive properties (Tape/Labels).
- 4811.41.21.00: Focus on Decoration/Printing/General Coating.


💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)

Applicable Country: United States (US)
Origin: China (CN)
Effective Date: Rates apply to imports from China (based on the "122 Clause" and "Add-on Tariffs" mentioned).

All four HS codes in <DATA> have the exact same tax structure: * Total Tax Rate: 35.0% * Tax Detail: * Base Tariff: 0.0% * Section 301 Add-on Tariff: 25.0% * "122 Clause" Tariff: 10.0%

🎯 1. 4811.51.20.50 & 4811.51.20.30 (Plastic-Coated Paper/Cardboard)

Item Content
Base Tariff 0% (ad valorem)
Section 301 Add-on +25%
"122 Clause" Add-on +10%
Total Effective Rate 35%
Calculation Basis CIF Value × 35%
De Minimis Exemption Not Eligible (High tariff rate usually excludes 80/200/2500 thresholds)
Legal Basis Path HTS:4811.51.20.xxUSITC Footnote (Section 301)Trade Act 122 Clause

📌 Explanation:
- The 25% is the standard Section 301 tariff on Chinese goods.
- The 10% is specifically attributed to the "122 Clause" (likely referring to specific trade enforcement or countermeasures detailed in the data source).
- Total Cost Impact: For every $1,000 of goods, $350 in duties must be paid. This is a high-cost entry into the US market.

🎯 2. 4811.41.10.00 (Self-Adhesive Coated Paper/Tape)

Item Content
Base Tariff 0%
Section 301 Add-on +25%
"122 Clause" Add-on +10%
Total Effective Rate 35%
Calculation Basis CIF Value × 35%
De Minimis Exemption Not Eligible

📌 Note:
- Self-adhesive papers (used for labels, tape backing) are treated with the same punitive tariff structure as plastic-coated papers in this dataset.
- No benefit from lower tariff rates for "adhesive" products under these specific HS codes.

🎯 3. 4811.41.21.00 (Decorated/Printed Coated Paper)

Item Content
Base Tariff 0%
Section 301 Add-on +25%
"122 Clause" Add-on +10%
Total Effective Rate 35%
Calculation Basis CIF Value × 35%
De Minimis Exemption Not Eligible

📌 Note:
- Even if the paper is printed or decorated, it does not escape the 35% duty.
- This code captures a broader range of surface treatments but remains heavily taxed.


🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)

✅ 1. Documentation Checklist (Essential)

Document Required? Explanation
Product Specification Sheet ✔️ Must specify: Base paper type (bleached vs. unbleached), coating material (plastic polymer vs. adhesive), and final form (roll, sheet, tape).
Material Safety Data Sheet (MSDS) ✔️ If the coating contains volatile organic compounds (VOCs) or hazardous adhesives.
Commercial Invoice ✔️ Must clearly state: "Coated Paper for [Specific Use]" and match the HS code description.
Packing List ✔️ Detailed dimensions and weight. Ensure no mixed goods (e.g., bare paper + coated paper in same box) unless declared separately.
Plastic Coating Certification ✔️ For 4811.51.20.xx: Prove the plastic layer is uniform and adheres correctly.
Adhesive Composition Report ✔️ For 4811.41.10.00: Specify if it's pressure-sensitive, heat-sensitive, etc.

✅ 2. Declaration Strategies (Key Mantras)

🔥 "Match the Morphology, Don't Guess the Code!"

Scenario Correct Declaration Wrong Approach
Plastic-laminated Bleached Paper 4811.51.20.50 Misdeclare as 4811.41.21.00 (Risk of audit)
Plastic-coated Cardboard 4811.51.20.30 Misdeclare as 4811.51.20.50 (Paper vs. Cardboard distinction is critical)
Self-Adhesive Tape Backing 4811.41.10.00 Misdeclare as generic "Paper" → Higher scrutiny
Printed/Glossy Paper 4811.41.21.00 If it’s also plastic-coated, use 4811.51.20.xx (Plastic coating takes precedence in hierarchy)

📌 Critical Tip:
- Plastic Coating vs. Printing: If paper is both plastic-coated AND printed, 4811.51.20.xx (Plastic) is often the more specific and preferred classification over 4811.41.21.00 (Printed). Check the HTS notes.
- Bleached vs. Unbleached: 4811.51.20.50 specifies bleached paper. If your base paper is unbleached (kraft), it may NOT fit 4811.51.20.50 and could be misclassified.

✅ 3. Special Case Handling

Situation Handling Advice
Mixed Shipments If a container has both plastic-coated paper and self-adhesive tape, separate HS codes are mandatory. Do not lump them under one code.
Origin Labeling Ensure the label "Made in China" is clear. The 35% tariff is specifically for Chinese origin.
Sample Shipments Even samples are subject to the 35% tariff if over $800 (de minimis exemption likely denied due to high rate).

🌍 V. Global Market Comparison (2026 Context)

Market Typical HS Code for Coated Paper General Tariff Rate Notes on Chinese Origin
🇺🇸 USA 4811.51.20.xx / 4811.41.xx 35% (as per data) Section 301 + 122 Clause apply. High barrier.
🇪🇺 EU 4811.51.00 / 4811.41.00 ~2.5% - 6.5% No Section 301 equivalent. Standard MFN rates apply.
🇨🇳 China 4811.51.20 / 4811.41 0% - 5% Import duty for foreign coated paper.
🇻🇳 Vietnam 4811.51.00 0% (if RCEP/origin) Check local rules of origin.

📌 Conclusion:
The US market (35%) is significantly more expensive for Chinese coated paper compared to the EU or China.
Strategy: Consider supply chain diversification (e.g., sourcing from Vietnam or Thailand) if possible, to avoid the 35% duty. Alternatively, ensure your product is high-margin to absorb the cost.


📌 VI. Common Mistakes & Pitfalls (Blood & Tears Lessons)

Mistake 1: Confusing "Plastic-Coated" (4811.51.20) with "Printed" (4811.41.21).
👉 Consequence: If the paper has a plastic film laminated on it, it must be 4811.51.20. Misdeclaring as 4811.41.21 may lead to rejection or penalties during inspection.

Mistake 2: Assuming "De Minimis" applies.
👉 Consequence: With a 35% tariff, shipments under $800 are NOT exempt. You will still pay duties.

Mistake 3: Ignoring the "Bleached" vs. "Unbleached" distinction.
👉 Consequence: 4811.51.20.50 specifies bleached. If you ship unbleached (brown) plastic-coated paper, this code is wrong. You may need 4811.51.20.30 (if it's board) or another subheading. Misclassification leads to delayed customs clearance.

Mistake 4: Not declaring the "122 Clause" impact.
👉 Consequence: Even if you quote the 25% Section 301, missing the additional 10% leads to underpayment and back-taxes + interest.

Correct Practice:

"Plastic-Coated Bleached Paper, Roll Form, 500gsm, For Packaging Use, HS 4811.51.20.50, Origin: China"


🎯 VII. Conclusion: Precision is Profit

🎯 Remember the Mantra:

🔹 "Plastic Coated? Use 4811.51.20.xx."
🔹 "Self-Adhesive? Use 4811.41.10.00."
🔹 "Printed/Decorated? Use 4811.41.21.00."
🔹 "All carry 35% Duty! Don't get caught off guard!"


📌 Pro Tip:
If you are importing large volumes of coated paper into the US, consider: 1. Advance Ruling: Apply for a binding ruling from CBP to confirm the correct HS code. 2. Supply Chain Audit: Can you source from a non-China origin to bypass the 35%? 3. Cost Absorption: Ensure your pricing model includes the full 35% duty + handling fees.


📣 Immediate Action:

📞 Consult with a licensed US Customs Broker.
📄 Provide samples or high-res photos of the coating (plastic film vs. liquid coating vs. adhesive).
🚀 Protect your margin with accurate classification!


Professional Clearance, Starts with Accurate Classification!
💼 Every percentage point of tariff matters!

Customer Reviews

About HS Code Classification

The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.

Each HS code follows a hierarchical structure:

  • Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
  • Heading (4 digits) — More specific grouping within the chapter
  • Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
  • National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes

Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.

When importing from CN to US, the applicable tariff rates may include:

  • Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
  • General rate — Applied to countries without trade agreements
  • Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties

The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.