电锤
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8201906000 | 35.0% | CN | US | Official Doc |
| 8205206000 | 35.0% | CN | US | Official Doc |
| 8205203000 | 41.2% | CN | US | Official Doc |
| 7326190080 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
Product Images
AI Analysis
🔨 Electric Hammers (Electric Power Tools for Percussive Drilling)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly is an "Electric Hammer"?
An Electric Hammer (often referred to as a rotary hammer or demolition hammer in industrial contexts) is a power tool that combines rotation and percussive force to drill into hard materials like concrete, stone, or brick. In international trade, its classification depends heavily on material composition, specific function, and whether it is classified as a "tool" or a "part/fitting".
⚠️ Key Distinction:
- If the item is a finished hand-held tool primarily made of steel/iron for striking or drilling → It falls under Chapter 82 (Tools of Base Metal).
- If the item is a generic steel component without specific tool features (rare for finished hammers) → It might fall under Chapter 73 (Articles of Iron or Steel).
- Note: Electric motors are not the primary classification basis here; the functional "hammering/striking" mechanism defines the HS Code.
📦 II. HS Code Classification Details (2026 Latest Tariff Reference)
Based on the provided dataset, here are the specific classifications for Electric Hammers:
| HS Code | Product Description | Applicable Scenario | Material/Usage Match |
|---|---|---|---|
8201.90.60.00 |
Metal Hammer Tools, fitting the attributes of base metal tools | General purpose metal hammers, including electric variants if classified by striking function | ✅ Base Metal Tool Attribute |
8205.20.60.00 |
Hammer Tools, Material and Usage Fully Match | Hand-held hammers, striking tools, specifically designed for percussive impact | ✅ Perfect Match |
8205.20.30.00 |
Hammers and Sledgehammers, Material and Usage Consistent | Larger hammers, sledgehammers, or heavy-duty striking tools | ✅ Consistent |
7326.19.00.80 |
Other Articles of Iron or Steel, Fitting Metal Material Attributes | Generic steel products, non-specific tool components, or improperly classified hammers | ⚠️ Less Specific |
7326.90.86.88 |
Other Articles of Iron or Steel, Unlisted Specific Instruments | Miscellaneous steel articles, parts not specifically listed as tools | ⚠️ Least Specific |
🔍 Crucial Insight:
- 8201 and 8205 are the preferred codes for finished hammer tools.
- 7326 categories are "catch-all" categories for steel articles. Using them for finished hammers is often considered incorrect classification by customs unless the item is merely a steel part/accessory.
- The difference lies in specificity: Chapter 82 is specific to tools; Chapter 73 is general for steel articles.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (Including subsequent imports)
🎯 1. 8201.90.60.00 & 8205.20.60.00 —— Hammer Tools (Base Metal)
| Item | Content |
|---|---|
| Base Duty Rate | 0% (Ad Valorem) |
| USITC Additional Duty | +25% (Under Section 301) |
| Section 122 Duty | +10% (Specific to China) |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No (Deny De Minimis) |
| Legal Basis Path | USITC:8201.90.60.00 → Section 301: 25% → Section 122: 10% |
📌 Explanation:
- These codes are recognized as specific tools, attracting the standard 25% Section 301 tariff plus the 10% Section 122 surcharge.
- Total burden is 35%. This is a moderate-to-high tariff but significantly lower than the generic steel category.
🎯 2. 8205.20.30.00 —— Hammers and Sledgehammers
| Item | Content |
|---|---|
| Base Duty Rate | 6.2% (Ad Valorem) |
| USITC Additional Duty | +25% (Under Section 301) |
| Section 122 Duty | +10% (Specific to China) |
| Total Duty Rate | 41.2% |
| Tax Calculation | CIF Value × 41.2% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:8205.20.30.00 → Section 301: 25% → Section 122: 10% |
📌 Note:
- Although the base rate is higher (6.2%), the total impact remains manageable.
- Often applied to larger, heavier hammers (e.g., sledgehammers) where the value per unit is higher, justifying the base duty.
🎯 3. 7326.19.00.80 & 7326.90.86.88 —— Other Steel Articles (Generic)
| Item | Content |
|---|---|
| Base Duty Rate | 2.9% (Ad Valorem) |
| USITC Additional Duty | +25% (Section 301) |
| Section 122 Duty | +10% (Section 122) |
| Steel/Aluminum/Copper Surcharge | +50% (Specific Add-on for Steel Products) |
| Total Duty Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:7326.xxxx.xxxx → Section 301: 25% → Section 122: 10% → Steel Surcharge: 50% |
📌 WARNING:
- DO NOT USE THESE CODES FOR FINISHED HAMMERS.
- If classified as generic steel articles, you face a staggering 87.9% total duty.
- The +50% steel surcharge is triggered because these codes fall under general steel articles, not specific tools.
- This is a critical error that leads to massive cost increases and potential customs penalties.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
✅ 1. Document Checklist (All Required)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify: Type (Electric Hammer/Rotary Hammer), Power (Watts/Volts), Weight, Application (Concrete/Drilling). |
| ✅ Product Photos (Clear) | ✔️ | Show the entire tool, handle, motor housing, and any branding. Distinguish from manual hammers. |
| ✅ Commercial Invoice | ✔️ | Clearly state: "Electric Hammer for Construction Use" – Avoid vague terms like "Steel Tool". |
| ✅ Packing List | ✔️ | List accessories (chisels, bits, cases) separately if shipped separately. |
| ✅ Certificate of Origin (CO) | ✔️ | Required to prove origin for Section 301/122 calculations. |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Classify as Tool, Not Steel! Be Specific, Save Money!"
| Situation | Correct Declaration | Incorrect Approach |
|---|---|---|
| Finished Electric Hammer | 8205.20.60.00 (35% Total) |
Declaring as "Steel Product" (7326) → 87.9% Total |
| Large Sledgehammer | 8205.20.30.00 (41.2% Total) |
Using generic steel code → 87.9% Total |
| Replacement Parts (e.g., Chisels) | Check if part of tool or separate | If separate, may still be under 8205, but verify. |
| "Power Tool" Vague Description | Avoid | If description is too vague, customs may assign 7326 by default → High Tax! |
✅ 3. Special Cases
| Situation | Handling Advice |
|---|---|
| OEM Custom Hammers | Provide client order + design specs. Ensure the description highlights "Tool" functionality. |
| Electric vs. Manual | Explicitly state "Electric" or "Power Tool". Manual hammers may have different rates, but electric ones are firmly in Chapter 82. |
| Bundled Kits (Hammer + Bit) | Declare as the main item (Hammer) if bits are minor accessories. Do not split unless necessary. |
| Used/Refurbished Tools | Additional scrutiny. Ensure cleanliness and safety certifications are noted. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 8205.20.60.00 |
35% (Tool) vs 87.9% (Steel) | UL, CE (if marked) | CRITICAL: Avoid 7326 codes. |
| 🇨🇳 China | 8205.20.60.00 |
5-8% | CCC | No Section 301/122. |
| 🇪🇺 EU | 8205.20.60.00 |
0-6.5% | CE, RoHS | No Section 301/122. |
| 🇬🇧 UK | 8205.20.60.00 |
0-6.5% | UKCA | Post-Brexit rules apply. |
| 🇦🇺 Australia | 8205.20.60.00 |
5% | RCMA | No Section 301/122. |
📌 Conclusion:
- USA is the only market with punitive 35%-87.9% tariffs.
- Correct classification (8205) saves you 52.9% in duty compared to misclassification (7326).
- For non-US markets, duties are significantly lower.
📌 VI. Common Errors & Pitfalls (Blood Lessons)
❌ Error 1: Declaring an Electric Hammer as "Steel Article" (7326)
👉 Consequence: Tax jumps from 35% to 87.9%. Overpay $5,290 on a $10,000 shipment.
❌ Error 2: Using Vague Terms like "Metal Tool"
👉 Consequence: Customs may classify under the most generic/penalized code (7326) → 87.9% Tax.
❌ Error 3: Splitting the Hammer and Motor
👉 Consequence: If declared separately, parts may be taxed differently, but if the tool is a single unit, it must be declared as one. Splitting incorrectly can lead to higher aggregate duties.
❌ Error 4: Ignoring Section 122
👉 Consequence: Even if you get the base HS Code right, forgetting the 10% Section 122 surcharge leads to underpayment → Fines & Penalties.
✅ Correct Practice:
"Electric Rotary Hammer, 800W, 110V, for Concrete Drilling, Model XYZ, UL Certified"
HS Code:8205.20.60.00
🎯 VII. Conclusion: Professional Classification, Profit Protection!
🎯 Remember the Mantra:
🔹 "Hammer is a Tool, Not Steel! 8205 saves 53%, 7326 kills your margin!"
🔹 "Check Section 301 and 122, 35% is the target, 87% is the trap!"
📌 Pro Tip:
If your hammers are assembled in Vietnam, Mexico, or Thailand, you may apply for IEEPA Exemptions or lower tariffs.
Recommend applying for an Advance Ruling from US Customs (CBP) to confirm the 35% rate and avoid post-clearance audits.
📣 Act Now:
📞 Consult a licensed customs broker + Provide product specs + Apply for Advance Ruling
🚀 Let your Electric Hammers clear customs smoothly, maximize profit, and scale globally!
✨ Professional Clearance Starts with Precise Classification!
💼 Every percentage point of duty is money in your pocket!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.