皮带用皮革修整废料
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4112006000 | 12.0% | CN | US | Official Doc |
| 4112003060 | 12.0% | CN | US | Official Doc |
AI Analysis
👞 Leather Scraps for Belts (Leather Trimming Waste for Belts)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly Are "Leather Trimming Scraps"?
Leather trimming scraps, specifically those intended for belts, are residual materials generated during the processing, cutting, or finishing of leather goods. In international trade, their classification depends heavily on their final use and physical state.
Key Distinction: * Non-Apparel/Non-Decorative Waste: If the scraps are generic offcuts not suitable for clothing or decoration, they typically fall under Chapter 41 heading 4112. * Glove-Specific Waste: If the scraps are specifically trimmed for glove manufacturing, they are classified under Chapter 41 heading 4107.
⚠️ Critical Classification Point:
- If the waste is for belts (generic leather offcuts) → 4112.00.30.60 / 4112.00.60.00
- If the waste is for gloves (specific glove trimmings) → 4107.11.70.40 / 4107.92.70.40
- Note: The input "皮带用皮革修整废料" explicitly states "for Belts," so the primary focus is on HS Codes 4112, but glove-specific codes are provided for completeness as they appear in the data.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Use Case | Category |
|---|---|---|---|
4112.00.30.60 |
Leather trimming waste for belts; leather material; processed waste form; non-decorative/non-apparel use. | Belt manufacturing scraps, generic leather offcuts | 🛠️ Leather Processing Waste |
4112.00.60.00 |
Leather trimming waste for belts; leather material; processed waste form; belongs to leather processing category. | General leather processing leftovers (belt-specific) | 🛠️ Leather Processing Waste |
4107.11.70.40 |
Leather trimming waste (for gloves); leather material; use for gloves; belongs to apparel leather category. | Glove manufacturing scraps | 👗 Apparel Leather Waste |
4107.92.70.40 |
Leather trimming waste (for gloves); leather material; use for gloves; belongs to other leather processing remainders. | Other glove-related leather remainders | 👗 Apparel Leather Waste |
🔍 Key Reminder:
- Belt-specific scraps (as per your query) primarily map to 4112.00.30.60 and 4112.00.60.00.
- Glove-specific scraps are distinct and map to 4107 series. Even if material is similar, the intended use dictates the code.
- Ensure your commercial invoice clearly states "For Belts" or "For Gloves" to avoid misclassification.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025/2026 (Based on 122 Section Tariff Implementation)
🎯 1. 4112.00.30.60 & 4112.00.60.00 —— Leather Trimming Waste (For Belts)
| Item | Content |
|---|---|
| Base Tariff | 2.0% (ad valorem) |
| Section 301 Tariff | 0.0% (No additional 301 tariff applied in this specific dataset) |
| Section 122 Tariff | +10.0% (Specific policy surcharge for leather scraps) |
| Total Tax Rate | 12.0% |
| Tax Calculation | CIF Value × 12.0% |
| De Minimis Exemption | ❌ Not Applicable (Section 122 tariffs typically exempt de minimis) |
| Legal Basis Path | HTSUS:4112.00.30.60 / 4112.00.60.00 → Section 122: 10% |
📌 Explanation:
- The 10% Section 122 Tariff is a specific surcharge often applied to certain leather products or scraps from China to address trade balance or specific sector protections.
- Unlike many electronics with 25% or 7.5% surcharges, this category has a fixed 10% add-on.
- Total Cost Impact: A $10,000 shipment incurs $1,200 in duties.
🎯 2. 4107.11.70.40 & 4107.92.70.40 —— Leather Trimming Waste (For Gloves)
| Item | Content |
|---|---|
| Base Tariff | 5.0% (ad valorem) |
| Section 301 Tariff | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 15.0% |
| Tax Calculation | CIF Value × 15.0% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | HTSUS:4107.x1.70.40 → Section 122: 10% |
📌 Note:
- Although the input is "for belts," these codes are included in the reference data for glove scraps.
- If you mistakenly ship glove scraps but declare them as belt scraps, or vice versa, you risk a 3% duty difference plus potential penalties.
- High Base Rate: Note that glove-related leather scraps have a higher base rate (5%) compared to belt scraps (2%).
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
✅ 1. Required Documentation Checklist (None of These Can Be Missing)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Commercial Invoice | ✔️ | Must explicitly state: "Leather Trimming Waste for Belts" or "For Gloves." Do not use vague terms like "Leather Scrap." |
| ✅ Packing List | ✔️ | Detail the weight and volume. Indicate if mixed with other materials (e.g., fabric backing). |
| ✅ Material Composition Certificate | ✔️ | Confirm 100% leather. If mixed with synthetic fibers, the HS code may change entirely. |
| ✅ Usage Declaration | ✔️ | Provide a letter stating the end-use: "Used in belt manufacturing," not for apparel or decoration. |
| ✅ Origin Certificate | ✔️ | Essential to prove CN origin for accurate Section 122 application. |
| ✅ Photos of Goods | ✔️ | Show the texture and form of the waste to prove it is "trimming waste" and not raw hides. |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Be Specific on Use, State the Form, Avoid 'Raw Hide'!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Belt Scraps | "Leather trimming waste for belts, non-apparel" | "Leather scraps" (Too vague, leads to detention) |
| Glove Scraps | "Leather trimming waste for gloves" | "Leather offcuts" (Misleading) |
| Mixed Materials | "Leather fabric waste" | Declare only leather component |
| Raw Hides vs. Waste | Waste = Small, irregular, processed offcuts | Raw Hides = Full skins. Declaring waste as raw hides is fraud; declaring raw hides as waste avoids higher duties (penalty risk). |
✅ 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| Mixed Shipment (Belt + Glove Scraps) | Split the invoice. Declare belt scraps under 4112 and glove scraps under 4107. Mixing them can lead to complex audits. |
| Wet vs. Dry Waste | Specify if waste is dried or wet. Wet waste may require phytosanitary certificates if animal origin is strict, though leather is usually tanned. |
| Re-export of Waste | If the waste is imported for re-processing and re-export, apply for Temporary Admission or Bonded Warehouse status if available, but note Section 122 still applies upon entry. |
| De Minimis (Section 321) | ❌ Do not use. Section 122 tariffs explicitly block the $800 de minimis exemption for these goods. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Requirement | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4112.00.30.60 / 4112.00.60.00 |
12.0% (2% Base + 10% Sec 122) | None specific for waste | Section 122 is critical; no de minimis. |
| 🇺🇸 USA (Glove) | 4107.11.70.40 / 4107.92.70.40 |
15.0% (5% Base + 10% Sec 122) | None | Higher base rate than belt waste. |
| 🇨🇳 China | 4112.00.30.60 |
~2.0% (Varies) | None | Domestic trade rates differ; this guide focuses on Export/US Import. |
| 🇪🇺 EU | 4112.00 |
Varies (Often 0% for waste) | REACH Compliance | EU may have lower base duties for waste materials. |
📌 Conclusion:
- The 10% Section 122 Tariff is the biggest cost driver for Chinese-origin leather scraps entering the US.
- Belt scraps (12%) are cheaper than glove scraps (15%) due to base rate differences.
- Accuracy in "Use" declaration is paramount to avoid misclassification fines.
📌 VI. Common Errors & Pitfall Avoidance (Blood & Tears Lessons)
❌ Error 1: Declaring "Leather Scraps" without specifying "For Belts" or "For Gloves."
👉 Consequence: Customs may assign a default higher code or hold the shipment for inspection.
❌ Error 2: Ignoring the Section 122 Tariff.
👉 Consequence: Underpayment of 10% duties → Back taxes + Penalties.
❌ Error 3: Claiming De Minimis for a $900 shipment of leather scraps.
👉 Consequence: Seizure. Section 122 explicitly excludes de minimis for these HTS codes.
❌ Error 4: Confusing "Waste" with "Raw Hides."
👉 Consequence: If declared as raw hides, you might avoid some duties, but if inspected and found to be waste, you face fraud allegations. Conversely, declaring waste as raw hides to avoid waste regulations is also illegal.
✅ Correct Practice:
"Import of Leather Trimming Waste for Belt Manufacturing, 100% Tanned Leather, Irregular Cut-offs, HS Code 4112.00.30.60, Subject to Section 122 Tariff."
🎯 VII. Conclusion: Precise Classification Saves Costs!
🎯 Remember the Mantra:
🔹 "Belts: 12% (2+10), Gloves: 15% (5+10)."
🔹 "No De Minimis for Section 122, Declare Use Clearly!"
🔹 "Waste is Not Raw Hide, Don't Mix Up the Codes!"
📌 Pro Tip:
If your leather scraps are from non-Chinese origins (e.g., Vietnam, Brazil), the Section 122 Tariff may not apply. Check the Country of Origin carefully. For Chinese goods, the 10% surcharge is mandatory.
📣 Immediate Action Required:
📞 Contact your customs broker with the exact end-use (Belt vs. Glove).
🚀 Accurate HS Code = Predictable Duties + Smooth Clearance.
✨ Professional clearance starts with precise classification!
💼 Your cost efficiency depends on every percentage point!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.