真空胎胶带
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4016935020 | 37.5% | CN | US | Official Doc |
| 4016996010 | 37.5% | CN | US | Official Doc |
| 3919102055 | 40.8% | CN | US | Official Doc |
Product Images
AI Analysis
🚲 Vacuum Tire Tape (Inner Tubeless Liner)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Know "Vacuum Tire Tape"?
Vacuum Tire Tape (also known as Tubeless Liner Tape or Self-Adhesive Tape for Tires) is a specialized accessory used in automotive, motorcycle, and bicycle tire maintenance. It is applied to the inner rim of a tubeless tire to provide an airtight seal, preventing air leakage when the tire bead is not perfectly seated or to protect the rim from corrosion.
In international trade, its classification depends heavily on its material composition and primary function: * Rubber-Based: If made of vulcanized rubber, it functions as a sealing/gasket component. * Plastic/Polymer-Based: If made of self-adhesive plastic films (like PVC or PE), it functions as a general-purpose adhesive tape.
⚠️ Key Distinction Point:
- If the product is vulcanized rubber used for sealing/adhesion in machinery → Classified under Chapter 40. - If the product is a plastic/self-adhesive tape without specific industrial machinery context → Classified under Chapter 39.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Material/Function |
|---|---|---|---|
4016.93.50.20 |
Other vulcanized rubber goods, other than hard rubber: Sealing devices and gaskets (including tape for such uses) | Rubber sealing tapes for tires, automotive mechanical parts, industrial gaskets | ✅ Vulcanized Rubber (Sealing function) |
4016.99.60.10 |
Other vulcanized rubber goods, other than hard rubber: Other parts and accessories | General rubber tapes, automotive auxiliary materials, non-specific rubber products | ✅ Vulcanized Rubber (General Part) |
3919.10.20.55 |
Self-adhesive plates, sheets, film, foil, tape, strip and other forms of flat goods, of plastics: Other, of plastics, in rolls of width ≤ 20 cm, self-adhesive | Plastic self-adhesive tapes, vacuum tire liners made of plastic/polymer, non-fiber reinforced | ✅ Plastic/Polymer (Adhesive Tape) |
🔍 Key Reminder:
- If the tape is Rubber-based, it belongs to Chapter 40 (HS 4016). - If the tape is Plastic-based (common in cheaper consumer versions), it belongs to Chapter 39 (HS 3919). - Do not mix materials: Ensure the physical sample matches the declared HS code. Customs will test material composition.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 4016.93.50.20 — Vulcanized Rubber Sealing Tape
| Item | Content |
|---|---|
| Base Tariff | 2.5% (ad valorem) |
| Section 301 Surcharge | +25.0% (USITC Footnote 9903.88.01 / Section 301) |
| IEEPA Surcharge | +10.0% (Targeting Chinese/HK products, effective from Nov 10, 2025) |
| Total Tariff Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Applicable (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:4016.93.50.20 → FOOTNOTE:301 |
📌 Explanation:
- "Base Tariff 2.5%" is the standard MFN rate for rubber gaskets/seals. - "Section 301 Surcharge 25%" is the standard penalty on many Chinese rubber goods. - "IEEPA 10%" is the new additional levy on Chinese imports. - Total 37.5%: High tariff, requires precise material declaration.
🎯 2. 4016.99.60.10 — Other Vulcanized Rubber Goods (Tape)
| Item | Content |
|---|---|
| Base Tariff | 2.5% |
| Section 301 Surcharge | +25.0% |
| IEEPA Surcharge | +10.0% |
| Total Tariff Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | IEEPA:9903.01.24 → USITC:4016.99.60.10 → FOOTNOTE:301 |
📌 Note:
- Same tariff rate as4016.93.50.20. - Used if the tape is rubber but not specifically classified as a "sealing device" but still a "part/accessory". - Common for generic rubber adhesive tapes.
🎯 3. 3919.10.20.55 — Self-Adhesive Plastic Tape (Rolls ≤ 20cm)
| Item | Content |
|---|---|
| Base Tariff | 5.8% |
| Section 301 Surcharge | +25.0% |
| IEEPA Surcharge | +10.0% |
| Total Tariff Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | IEEPA:9903.01.24 → USITC:3919.10.20.55 → FOOTNOTE:301 |
📌 Important:
- Plastic tapes have a higher base rate (5.8%) than rubber tapes (2.5%). - Total rate is 40.8%, which is higher than rubber options. - If you can prove the product is rubber, choose HS Code4016...to save 3.3% in taxes.
🛠️ IV. Practical Clearance Advice (Battle-Tested Pitfall Avoidance Guide)
✅ 1. Required Documentation Checklist (No Exceptions)
| Document | Required? | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify material (Rubber vs. Plastic), width, length, adhesive type. |
| ✅ Material Test Report | ✔️ | Critical to prove Vulcanized Rubber vs. Plastic. Lab test for rubber content. |
| ✅ Product Photos (Clear) | ✔️ | Show roll structure, adhesive side, and any branding. |
| ✅ Commercial Invoice | ✔️ | Describe as "Vulcanized Rubber Tape for Tire Sealing" or "Self-Adhesive Plastic Tape". Do NOT use vague terms like "Tape". |
| ✅ Packing List | ✔️ | Detail net weight/gross weight. |
| ✅ Declaration of Non-Electrical/Non-Fiber | ✔️ | For HS 3919, confirm no fiber reinforcement. |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 "Material Determines Code: Rubber is 37.5%, Plastic is 40.8%. Be Honest!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Rubber Tape | HS: 4016.93.50.20 / 4016.99.60.10Desc: "Vulcanized Rubber Sealing Tape" |
Declare as "Plastic Tape" → Audit & Penalty |
| Plastic Tape | HS: 3919.10.20.55Desc: "Self-Adhesive Plastic Tape" |
Declare as "Rubber" → Material mismatch → Seizure |
| Vacuum Tire Liner | Must specify if it's a tape roll or pre-cut liner. If roll, use HS 4016/3919. | Declare as "Tire Part" → Wrong Chapter (8708) → Delay |
| Width > 20cm | HS 3919 applies to rolls ≤ 20cm. If wider, use 3920 or 3921. |
Use 3919 for wide rolls → Error |
✅ 3. Special Cases Handling
| Case | Handling Advice |
|---|---|
| OEM Custom Tape | Provide customer design + material specs. Avoid "Generic" labels. |
| Mixed Materials | If tape has rubber + plastic layers, declare as the principal material. Usually rubber if it's a tire seal. |
| Small Roll (<20cm) | Must use 3919 or 4016. If misdeclared as broader category, risk of higher duty. |
| Pre-cut Tire Liners | If pre-cut to fit a specific rim, it may be considered a "part of a tire" (HS 4011) or "other rubber goods". Consult Customs for pre-ruling. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4016.93.50.20 (Rubber) |
37.5% | None specific | Highest Priority: Material proof is key. |
| 🇨🇳 China | 4016.93.50.20 |
2.5% | None | Low tariff, easy clearance. |
| 🇪🇺 EU | 4016.93.50.20 |
0% (Most) | REACH | No Section 301/IEEPA surcharges. |
| 🇦🇺 Australia | 4016.93.50.20 |
5% | None | Moderate tariff. |
| 🇯🇵 Japan | 4016.93.50.20 |
5.3% | None | No extra surcharges. |
📌 Conclusion:
- USA is the most expensive market due to 37.5%-40.8% total tariffs. - EU/Japan/Australia offer much lower tariffs. - Material Declaration is the single most critical factor for US clearance.
📌 VI. Common Mistakes & Pitfall Avoidance (Lessons Learned)
❌ Mistake 1: Declaring Rubber Tape as "Plastic Tape" to avoid inspection
👉 Consequence: Customs lab test reveals rubber → Penalty for false declaration + Back Taxes.
❌ Mistake 2: Declaring Plastic Tape as "Rubber" to save 3.3%
👉 Consequence: Material mismatch → Goods detained, fined, or returned. Not worth the risk!
❌ Mistake 3: Using vague terms like "Adhesive Tape"
👉 Consequence: Customs officer chooses the highest possible duty category → Higher tax burden.
❌ Mistake 4: Ignoring IEEPA 10% surcharge
👉 Consequence: Underestimating landed cost → Loss of profit margin.
✅ Correct Practice:
"Vulcanized Rubber Self-Adhesive Tape, 10cm width, 100m length, for Tubeless Tire Sealing, Model XYZ, Material: Vulcanized Rubber (Not Plastic)"
🎯 VII. Conclusion: Professional Declaration, Time & Cost Saving!
🎯 Remember the Mnemonic:
🔹 "Rubber is 37.5%, Plastic is 40.8%. Don't Lie!"
🔹 "HS Code decides tax, declare material clearly, save thousands!"
📌 Pro Tip:
If your tape is originally from Vietnam, Mexico, or Thailand, you may qualify for IEEPA Exemption or Section 301 Exclusion, reducing tariffs to 0%~5%.
Recommend applying for an Advance Ruling from US Customs (CBP) before shipment to ensure correct classification and avoid delays.
📣 Immediate Action:
📞 Contact a professional customs broker + Provide material sample/photos + Apply for HS Code Pre-ruling
🚀 Let your Vacuum Tire Tape clear smoothly, cost-effectively, and profitably!
✨ Professional clearance starts with accurate classification!
💼 Every cent of your cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.