睫毛Y形叉
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9615114000 | 15.3% | CN | US | Official Doc |
| 9615112000 | 15.2% | CN | US | Official Doc |
AI Analysis
👁️ Eyelash Y-Fork (Tweezers for False Lashes)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Level Entry Strategy
📌 I. Product Definition and Classification: Do You Really Understand the "Y-Fork"?
The Eyelash Y-Fork (often called Eyelash Tweezers or Y-Tweezers) is a specialized beauty tool used for picking up, applying, and adjusting individual or cluster false eyelashes. In international trade, it is classified based on its material composition and functional form, leading to distinct tariff lines.
There are two primary categorization paths for this item:
1. Plastic/Hard Rubber Y-Fork (Non-Metal):
- Form: The prongs and handle are molded from plastic or hard rubber.
- Function: Used for holding lashes without damaging them due to static or temperature.
- Classification Logic: Falls under "Combs, Hair Clips, and Similar Articles" (Chapter 96).
2. Metal Y-Fork (Stainless Steel/Metal Alloy):
- Form: Entirely or partially made of metal, designed for precision gripping.
- Function: Acts as a cutting/shaping tool or a precision manipulation tool for beauty care.
- Classification Logic: Falls under "Other Cutting or Shaping Tools" (Chapter 82), specifically categorized under hairdressing or manicure instruments.
⚠️ Key Distinction Point:
- If the item is Plastic/Rubber → Classified under 9615.11.40.00 (Cosmetic/Toiletry items made of plastic).
- If the item is Metal → Classified under 8214.90.x0.00 (Tools for hairdressing/manicuring).
- Note: The metal classification carries significantly higher tariffs due to Section 301 and IEEPA penalties.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material |
|---|---|---|---|
9615.11.40.00 |
Combs, hair clips, and similar articles; other (Plastic/Hard Rubber) | Non-metal Y-forks, plastic tweezers for beauty tools | ✅ Plastic / Hard Rubber |
8214.90.60.00 |
Other tools for cutting, shaping, etc.; other (Metal) | Metal Y-forks, basic metal beauty tweezers | ✅ Metal |
8214.90.30.00 |
Other tools for cutting, shaping, etc.; hairdressing/manicuring tools | Premium metal Y-forks, precision metal beauty tools | ✅ Metal |
🔍 Key Reminder:
- Plastic Y-Forks are generally viewed as "Cosmetic Accessories" under Chapter 96.
- Metal Y-Forks are legally defined as "Tools" under Chapter 82. Despite being used for beauty, their metallic nature and precision engineering push them into the "Tools" category, which incurs much higher duties.
💰 III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Additions)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Post-2025 (Includes Section 301 & IEEPA provisions)
🎯 1. 9615.11.40.00 —— Eyelash Y-Fork (Plastic/Hard Rubber)
| Item | Content |
|---|---|
| Base Tariff | 5.3% (Ad Valorem) |
| USITC Surcharge (Section 301) | +0.0% (No specific footnotes apply to this sub-heading for extra surcharges beyond the base if not specified, but generally 7.5% or 10% may apply depending on specific list updates. Based on DATA: 0% surcharge listed here, likely meaning no additional Section 301 specific footnote, but see Total Tax.) |
| IEEPA Surcharge (122 Clause) | +10.0% (Specific IEEPA provision applied in DATA) |
| Total Tax Rate | 15.3% |
| Tax Calculation | CIF Value × 15.3% |
| De Minimis Eligibility | ❌ No (Deny De Minimis - usually applies to high-risk categories or specific origin rules) |
| Legal Basis Path | USITC:9615.11.40.00 → IEEPA:122 Clause |
📌 Explanation:
- This is the most cost-effective classification for plastic Y-forks.
- The "122 Clause Tariff 10%" refers to specific IEEPA authorities applied to certain consumer goods.
- Total burden: 15.3%, which is manageable for low-value cosmetic tools.
🎯 2. 8214.90.60.00 —— Eyelash Y-Fork (Basic Metal Tool)
| Item | Content |
|---|---|
| Base Tariff | 0.2¢ per unit + 3.1% (Ad Valorem) |
| USITC Surcharge (Section 301) | +0.0% (Specific footnote not added here in DATA) |
| IEEPA Surcharge (122 Clause) | +10.0% |
| Total Tax Rate | 0.2¢/ea + 13.1% (3.1% + 10.0%) |
| Tax Calculation | (Quantity × 0.002) + (CIF Value × 13.1%) |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:8214.90.60.00 → IEEPA:122 Clause |
📌 Note:
- Even though the base ad valorem is low (3.1%), the specific duty of 0.2¢ per piece can add up for high-volume shipments.
- The total effective rate is 13.1% + per-unit fee.
🎯 3. 8214.90.30.00 —— Eyelash Y-Fork (Precision Metal/Manicuring Tool)
| Item | Content |
|---|---|
| Base Tariff | 1¢ per unit + 4.9% (Ad Valorem) |
| USITC Surcharge (Section 301) | +7.5% |
| IEEPA Surcharge (122 Clause) | +10.0% |
| Total Tax Rate | 1¢/ea + 22.4% (4.9% + 7.5% + 10.0%) |
| Tax Calculation | (Quantity × 0.01) + (CIF Value × 22.4%) |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | USITC:8214.90.30.00 → USITC:Footnote7.5 → IEEPA:122 Clause |
📌 Warning:
- This is the highest tariff category for Y-forks.
- If your metal Y-fork is considered a "specialized manicuring/hairdressing tool" rather than a generic cutting tool, it falls here.
- Total burden: 22.4% + 1¢/unit. This is extremely costly for low-margin items.
🛠️ IV. Clearance Practical Advice (Pitfall Avoidance Guide)
✅ 1. Required Documentation Checklist
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specs | ✔️ | Must clearly state Material (Plastic vs. Metal). This is the #1 factor for HS Code determination. |
| ✅ Product Photos | ✔️ | Clear images of the Y-shaped tip. If metal, show finish/shine. |
| ✅ Commercial Invoice | ✔️ | Describe as "Eyelash Tweezers" or "Beauty Tool Y-Fork". Do NOT use vague terms like "Plastic Stick". |
| ✅ Material Declaration | ✔️ | Explicitly state: "Handle and prongs made of ABS Plastic" OR "Stainless Steel". |
| ✅ Packing List | ✔️ | Include unit count for specific duty calculations (0.2¢ or 1¢ per unit). |
✅ 2. Classification Strategy (Critical Tips)
🔥 “Plastic is Cheap, Metal is Expensive, Choose Wisely!”
| Scenario | Recommended HS Code | Estimated Effective Rate | Why? |
|---|---|---|---|
| Plastic Y-Fork | 9615.11.40.00 |
15.3% | Lowest duty for plastic cosmetic tools. No specific per-unit fee. |
| Basic Metal Y-Fork | 8214.90.60.00 |
~13.1% + 0.2¢/ea | Lower ad valorem, but check if it qualifies as "General Tool" vs. "Specialized". |
| Premium Metal Y-Fork | 8214.90.30.00 |
~22.4% + 1¢/ea | Highest risk. Avoid if possible unless it is a high-value precision instrument. |
Strategic Advice:
- If you are importing metal Y-forks, try to argue for 8214.90.60.00 by emphasizing they are "general shaping tools" rather than "specialized manicuring instruments" (8214.90.30.00). The difference in tax (13.1% vs 22.4%) is significant. - If using plastic, ensure the invoice clearly states "Plastic" to secure the 15.3% rate. Do not let customs classify a plastic item as metal.
✅ 3. Special Cases
| Case | Handling Advice |
|---|---|
| Mixed Material (Plastic Handle + Metal Tip) | Customs may classify based on the essential character. If the metal tip is the functional part, it might be classified as Metal (8214). Check for tariff liability. |
| Set with Lashes | If sold as a "Beauty Kit" including lashes, the HS Code may follow the essential character of the kit. Usually, the tool dominates, but consult a broker. |
| OEM Private Label | Ensure the product name on the box matches the invoice. "Y-Fork" is acceptable, but "Metal Beauty Tool" is safer for 8214 classification. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Duty (China Origin) | Certification | Note |
|---|---|---|---|---|
| 🇺🇸 USA | 9615.11.40.00 (Plastic) |
15.3% | None usually required | Plastic is cheaper than Metal |
| 🇺🇸 USA | 8214.90.30.00 (Metal) |
~22.4% + 1¢/ea | None usually required | Metal is expensive due to 301 + IEEPA |
| 🇪🇺 EU | 9615.19.00 (Plastic) |
2.7% (approx) | CE (if electrical, not applicable here) | Plastic Y-forks are cheap in EU |
| 🇨🇳 China | 9615.19.00 |
9.0% | N/A | Exporting from China to China not applicable |
📌 Conclusion:
- USA is the most expensive market for beauty tools due to Section 301 and IEEPA tariffs.
- Plastic Y-forks offer a better margin protection (15.3%) compared to Metal Y-forks (up to 22.4%).
- Recommendation: Prioritize plastic Y-forks for mass market, or premium metal for high-end niche markets where cost is less sensitive.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Mistake 1: Classifying a Plastic Y-Fork under 8214 (Metal Tools).
👉 Consequence: Unnecessary audit for "material misdeclaration" or higher duty if metal rates were incorrectly applied and then corrected.
👉 Fix: Clearly state "Plastic" on invoice and spec sheet.
❌ Mistake 2: Classifying a Metal Y-Fork under 9615 (Cosmetic Articles).
👉 Consequence: Customs will reclassify to 8214, leading to back duties, penalties, and delays.
👉 Fix: Metal beauty tools are legally "Tools" (8214), not "Cosmetics" (9615).
❌ Mistake 3: Ignoring the Per-Unit Duty for Metal Y-Forks.
👉 Consequence: For large quantities (e.g., 10,000 units), the 0.2¢ or 1¢ per unit fee adds $20–$100+ to your cost, which was not budgeted.
👉 Fix: Calculate total duty including specific duties for high-volume shipments.
❌ Mistake 4: Vague Description "Beauty Tool".
👉 Consequence: Customs broker may guess the HS Code, leading to errors.
👉 Fix: Use precise descriptions: "Y-Shaped Eyelash Applicator, Plastic" or "Stainless Steel Eyelash Tweezers".
✅ Correct Declaration Example:
"Y-Shape Eyelash Tweezers, Plastic, for Cosmetic Use, Model: YF-001"
OR
"Stainless Steel Y-Fork Eyelash Applicator, Precision Tool, Model: YF-M-001"
🎯 VII. Conclusion: Professional Classification, Cost Savings!
🎯 Key Takeaways:
🔹 Plastic Y-Fork =
9615.11.40.00= 15.3% Total Tax
🔹 Metal Y-Fork (Basic) =8214.90.60.00= 13.1% + 0.2¢/ea
🔹 Metal Y-Fork (Premium) =8214.90.30.00= 22.4% + 1¢/ea
🔹 "Material is King": The difference between plastic and metal can save or cost you 7-9% in duty alone, plus per-unit fees.🔹 "Don't Let Metal Bite Your Profit": If you can achieve the same aesthetic and function with high-quality plastic, choose 9615.
📌 Pro Tip:
For Metal Y-Forks, always request your supplier for the exact material composition (e.g., "Stainless Steel 410" vs "Carbon Steel"). Some alloys may have different tariff treatments, though 8214.90 is generally consistent.
Apply for a Pre-Ruling (Binding Tariff Information) if importing large volumes of metal Y-forks to mitigate risk.
📣 Call to Action:
📞 Contact your customs broker with Material Declarations + Product Photos.
🚀 Optimize your HS Code, Reduce Your Duties, Maximize Your Profit!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Cent Saved on Duty is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.