纤维增强胶带膜
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919102010 | 40.8% | CN | US | Official Doc |
| 5603110070 | 35.0% | CN | US | Official Doc |
| 5603120070 | 35.0% | CN | US | Official Doc |
| 3919905020 | 40.8% | CN | US | Official Doc |
| 3926905500 | 40.1% | CN | US | Official Doc |
AI Analysis
🎗️ Fiber-Reinforced Tape Film (纤维增强胶带膜)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What Exactly is "Fiber-Reinforced Tape"?
Fiber-reinforced tape film is a composite adhesive product designed for high-strength bundling, sealing, or reinforcement. In international trade, its classification depends heavily on the primary material (plastic vs. textile) and the state of reinforcement (embedded in plastic vs. standalone non-woven fabric).
Two Main Classification Paths:
- Plastic-Base Reinforced Tape (自粘塑料胶带): The core is plastic/film, reinforced with fibers (glass, fiberglass, or synthetic). It acts as a coated/adhesive tape.
- Key Feature: "Fiber-reinforced" (纤维增强) is explicitly mentioned in tariff explanations.
- Textile/Non-Woven Base Tape (纺织/非织造布类): Made primarily of long synthetic filaments or fibers, potentially bonded or non-woven, functioning as a tape but technically classified as a textile/non-woven product.
- Key Feature: Material is identified as "long filaments" or "non-woven fabric" without explicit plastic reinforcement context.
⚠️ Key Distinction Point:
- If the product is a plastic film with embedded fibers and is self-adhesive → Chapter 39 (Plastics)
- If the product is a mat of synthetic fibers used as a tape → Chapter 56 (Non-wovens/Textiles)
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the 5 potential HS Codes, ranked by likelihood and logical deduction.
| HS Code | Product Description | Application Scenario | Material/Structure Logic |
|---|---|---|---|
3919.10.20.10 |
Self-adhesive plates, sheets, film, foil, tape, strip, and other shapes of plastics, in rolls of width ≤ 20 cm, of plastics reinforced with fiber or other material | High-strength strapping, industrial bundling, reinforced packaging tape. | ✅ Perfect Match: Explicitly matches "Fiber Reinforced" (纤维增强) + "Tape" (胶带) + "Self-adhesive" (自粘). |
3919.90.50.20 |
Self-adhesive tapes of plastics, other | General purpose reinforced tapes not meeting specific width/sub-heading criteria, or generic reinforced plastic tapes. | ✅ Match: Material (Plastic + Fiber) and Form (Tape) align. Considered a "catch-all" for reinforced plastic tapes if 3919.10 is too specific. |
5603.11.00.70 |
Non-woven fabrics, with a weight ≤ 25 g/m², of man-made filaments | Lightweight fiber tape, non-woven adhesive-backed fabric. | ⚠️ Inferred: Assumes material is "man-made filaments/fibers" forming a non-woven structure. No conflict in material/use. |
5603.12.00.70 |
Non-woven fabrics, with a weight > 25 g/m² but ≤ 70 g/m², of man-made filaments | Heavier duty fiber tape or fabric tape. | ⚠️ Inferred: Based on "Fiber" name, assumes non-woven fabric format. Tape is seen as an application of this fabric. |
3926.90.55.00 |
Other articles of plastics and articles of other materials of heading 3901 to 3914, containing textile fibers | Plastic items containing textile fibers (general category). | ⚠️ Match: "Contains textile fibers" matches "Fiber"; "Plastic" matches tape base. Classified under "Other" due to lack of specific tape sub-heading match in some interpretations. |
🔍 Focus Reminder:
-3919.10.20.10is the most precise classification for "Fiber-Reinforced Tape" because the tariff description explicitly contains "reinforced with fiber" and "tape". -3919.90.50.20is the primary alternative if the specific width or reinforcement type doesn't fit3919.10. -5603codes are alternatives if the product is essentially a non-woven fabric tape (textile-based) rather than a plastic film tape. -3926.90.55.00is a fallback for mixed-material articles that don't fit the specific tape headings.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 3919.10.20.10 —— Plastic Tape, Self-Adhesive, Reinforced with Fiber
| Item | Content |
|---|---|
| Basic Tariff | 5.8% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (122 Clause) | +10.0% |
| Total Tariff Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Exemption | ❌ Not Available (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3919.10.20.10 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- The 5.8% basic tariff applies to self-adhesive plastic tapes. - The 25% Section 301 duty is the standard surtax on Chinese plastics. - The 10% IEEPA (122 Clause) duty applies specifically to certain Chinese imports. - Total 40.8% is a high tariff, requiring careful cost planning.
🎯 2. 3919.90.50.20 —— Other Self-Adhesive Plastic Tapes
| Item | Content |
|---|---|
| Basic Tariff | 5.8% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (122 Clause) | +10.0% |
| Total Tariff Rate | 40.8% |
| Tax Calculation | CIF Value × 40.8% |
| De Minimis Exemption | ❌ Not Available (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3919.90.50.20 → FOOTNOTE:9903.88.01 |
📌 Note:
- Same tax burden as3919.10.20.10. - Use this if the specific "reinforced" criteria for3919.10are not met, but the product is still a reinforced plastic tape.
🎯 3. 3926.90.55.00 —— Other Plastic Articles Containing Textile Fibers
| Item | Content |
|---|---|
| Basic Tariff | 5.1% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (122 Clause) | +10.0% |
| Total Tariff Rate | 40.1% |
| Tax Calculation | CIF Value × 40.1% |
| De Minimis Exemption | ❌ Not Available (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3926.90.55.00 → FOOTNOTE:9903.88.01 |
📌 Note:
- Slightly lower total rate (40.1%) compared to the tape-specific codes (40.8%). - Risk: Customs may challenge this classification if the product is clearly a "tape" (Chapter 39.19) rather than a general "article" (Chapter 39.26). GATT Rule 1 states specific headings (39.19) prevail over general ones (39.26). Use with caution.
🎯 4. 5603.11.00.70 & 5603.12.00.70 —— Non-Woven Fabrics of Man-Made Filaments
| Item | Content |
|---|---|
| Basic Tariff | 0.0% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (122 Clause) | +10.0% |
| Total Tariff Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Available (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:5603.xxxx.70 → FOOTNOTE:9903.88.01 |
📌 Note:
- Lowest Total Rate (35.0%) among all options. - Condition: The product must be legally classified as a non-woven fabric (Chapter 56) rather than a plastic tape (Chapter 39). - Risk: If Customs determines the product is primarily plastic-based (even if reinforced with fiber), it will reclassify to Chapter 39, resulting in a 40.8% rate and potential penalties. Only use if the textile/non-woven nature is dominant.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Required Documentation Checklist (All Are Mandatory)
| Document | Required? | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must detail: Base material (Plastic/Fiber), Reinforcement type (Glass/Synthetic), Width, Length, Adhesive type, Weight per m². |
| ✅ Product Photos | ✔️ | Clear images showing the cross-section (to prove fiber reinforcement) and surface (to show adhesive/texture). |
| ✅ Commercial Invoice | ✔️ | Must clearly state "Fiber Reinforced Plastic Tape" or "Non-Woven Fiber Tape" depending on classification. Avoid vague terms like "Plastic Film". |
| ✅ Packing List | ✔️ | Show rolls, weight, and dimensions. |
| ✅ Certificate of Origin (CO) | ✔️ | Essential for verifying origin as China (CN) to apply correct surtaxes. |
| ✅ Material Composition Statement | ✔️ | Explicitly state % of plastic vs. % of fiber to support Chapter 39 vs. Chapter 56 classification. |
✅ 2. Declaration Strategy (Key Mantras)
🔥 "Material Determines Chapter, Form Determines Heading!"
| Scenario | Correct Declaration | Error to Avoid |
|---|---|---|
| Plastic base + embedded fiber | 3919.10.20.10 (Fiber-Reinforced Tape) |
Misdeclare as 3926 (General Article) → Risk of reclassification. |
| Non-woven fabric base | 5603.11.00.70 or 5603.12.00.70 |
Misdeclare as Plastic Tape → 40.8% vs 35.0% difference. |
| Generic Plastic Tape | 3919.90.50.20 |
Do not claim "Fiber Reinforced" if not present → Penalty for false declaration. |
| Mixed Material Tape | 3926.90.55.00 (if not clear tape) |
Do not force into 3919 if it doesn't meet "Tape" definition → Risk of rejection. |
✅ 3. Special Situation Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Tape | Provide client orders and design specs. Highlight "Fiber Reinforced" feature to support 3919.10.20.10. |
| High-Value Reinforced Tape | Consider applying for an Advance Ruling (Pre-Classification) to lock in 3919.10.20.10 or 5603 classification and avoid 40.8% vs 35.0% disputes. |
| Transshipment via Third Country | Ensure Country of Origin remains China. Transshipment does not change the IEEPA/301 surtax applicability. |
| Weight-Based Classification (5603) | If using 5603, precise grammage (g/m²) is critical. 5603.11 is ≤25 g/m²; 5603.12 is >25 but ≤70 g/m². Inaccuracy leads to reclassification. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Total Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3919.10.20.10 |
40.8% | None specific for tape, but FDA compliance if food-contact | Highest cost. IEEPA + Section 301 apply. |
| 🇨🇳 China | 3919.10.20.10 |
5.8% | CCC (if applicable) | No surtaxes. Best market for cost. |
| 🇪🇺 EU | 3919.10.20.10 |
~6-8% (varies) | CE, REACH | No Section 301/IEEPA surtaxes. |
| 🇦🇺 Australia | 3919.10.20.10 |
5% | None | No additional surtaxes. |
| 🇯🇵 Japan | 3919.10.20.10 |
0-5% | PSE (if electrical) | Low tariff base, no major surtaxes. |
📌 Conclusion:
- The USA is the only major market imposing 40.8% on these goods. - Chapter 56 (5603) offers a 5.8% savings (35.0% vs 40.8%) IF the product can be legitimately classified as non-woven fabric. - Strategy: If the product is clearly plastic-based, accept the 40.8%. If it is primarily fiber/non-woven, provide grammage data to support5603for tax optimization.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring "Fiber Reinforced Tape" as 3926.90.55.00 (General Plastic Article)
👉 Consequence: Customs may reclassify to 3919 (Specific Tape), leading to correct tariff of 40.8% and potential penalties for improper declaration. The specific heading (39.19) overrides the general one (39.26).
❌ Error 2: Classifying Plastic-Based Reinforced Tape as 5603 (Non-Woven)
👉 Consequence: Customs will reject based on Chapter Note 3 (Plastics take precedence if plastic is the primary material). Result: Back taxes + Interest.
❌ Error 3: Ignoring the 122 Clause (IEEPA) 10%
👉 Consequence: Underestimating total cost by 10%. The total is 40.8%, not 30.8%. Budgeting errors can kill margins.
❌ Error 4: Vague Product Name "Plastic Tape"
👉 Consequence: Customs will not identify "Fiber Reinforced" feature, potentially misclassifying to a different sub-heading or delaying clearance for further inquiry.
✅ Correct Approach:
"Self-Adhesive Plastic Tape, Reinforced with Glass Fibers, Roll Width 10cm, for Industrial Bundling"
OR
"Non-Woven Fabric Tape, Man-Made Filaments, Weight 30g/m², Adhesive Backed"
🎯 VII. Conclusion: Precision Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Plastic Base → 3919 (40.8%)"; "Non-Woven Fiber → 5603 (35.0%)"; "Generic Article → 3926 (Risk!)"
🔹 "IEEPA + 301 = 35% Minimum; Total 40.8% for Plastic Tape"
🔹 "Check Grammage for 5603; Check Material % for 3919"
📌 Pro Tip:
If your product is exclusively textile/fiber-based (no plastic film), pursue 5603.11.00.70 or 5603.12.00.70 to save 5.8% in tariffs.
For plastic-fiber composite tapes, 3919.10.20.10 is the safest and most accurate classification despite the higher rate.
📣 Immediate Action:
📞 Consult with a licensed customs broker.
📄 Provide material composition and grammage data.
🚀 Apply for Advance Ruling if the classification is borderline between Plastic (3919) and Non-Woven (5603).
✨ Professional Clearance Starts with Accurate Classification!
💼 Every percent saved is profit earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.