纺织增强塑料广告板
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6815190000 | 35.0% | CN | US | Official Doc |
| 3921905010 | 39.8% | CN | US | Official Doc |
| 3921904010 | 39.2% | CN | US | Official Doc |
| 3921905050 | 39.8% | CN | US | Official Doc |
| 3921905010 | 39.8% | CN | US | Official Doc |
AI Analysis
🖥️ Textile-Reinforced Plastic Advertising Panels
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Full Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Textile-Reinforced Plastic Advertising Panels"?
Textile-reinforced plastic advertising panels are composite materials used for signage, interior decoration, and outdoor advertising displays. They combine a plastic matrix with textile reinforcement to provide durability, lightweight properties, and aesthetic appeal.
In international trade, the classification hinges on two key factors: 1. Material Composition: Primarily plastic with textile reinforcement. 2. Form & Function: Sheet/panel format, used for decoration or advertising.
⚠️ Key Distinction Point:
- If the product is primarily a composite panel where the textile acts as a structural reinforcement within a plastic matrix, it may fall under Chapter 68 (Stone, plaster, cement, asbestos, mica or similar materials) if interpreted as a "composite article not elsewhere specified." - If it is viewed as a plastic sheet/panel with an added decorative or reinforcing layer, it falls under Chapter 39 (Plastics and articles thereof).
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
| HS Code | Product Description | Applicable Scenario | Reason for Classification |
|---|---|---|---|
6815.19.00.00 |
Articles of stone, plaster, cement, asbestos, mica or similar materials, other | Non-electric, carbon fiber or similar fiber reinforced composite articles, in the form of "sheets" | "Textile reinforcement" is inferred as a non-electric fiber-reinforced composite. The form is "sheet/board." Fits "Other" category under Chapter 68. |
3921.90.50.10 |
Other plates, sheets, film, foil and strips, of plastics: Other: Decorative laminates, high-pressure | Plastic material; "Advertising panel" aligns with "decorative panel"; "Textile reinforcement" is a valid reinforcing layer for laminates | Material is "plastic"; form is "panel"; "Textile reinforcement" is logically consistent with laminate construction. High relevance to decorative laminates. |
3921.90.40.10 |
Other plates, sheets, film, foil and strips, of plastics: Other: Of plastics with a surface covered with paper | Plastic plate form; "Textile reinforcement" is a variant of plastic sheets/films; does not conflict with "paper-reinforced" attributes | Material is "plastic sheet/panel"; "Textile reinforcement" is treated as a variation within the plastic board category. No material conflict. |
3921.90.50.50 |
Other plates, sheets, film, foil and strips, of plastics: Other: Other | Plastic material; "Panel" form fits "Other" category in Chapter 39; no material or form conflict | Material is "plastic"; form is "panel"; fits the residual "Other" category for plastic sheets without specific sub-classification. |
🔍 Key Reminder:
- If the product is primarily plastic with a decorative textile layer, Chapter 39 (Plastics) is often more appropriate than Chapter 68. - If the textile reinforcement is structural and the panel is considered a composite material not specifically listed elsewhere, Chapter 68 might apply, but this is less common for advertising panels. - 3921.90.50.10 is the most specific for "decorative laminates," while 3921.90.50.50 is a general fallback.
💰 III. 2026 Latest Tariff Rate Details (Including Surcharges, Policy Additions)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: November 10, 2025 (and subsequent imports)
🎯 1. 6815.19.00.00 —— Articles of Stone, Plaster, etc. (Composite)
| Item | Content |
|---|---|
| Base Tariff | 0% (ad valorem) |
| USITC Surcharge | +25% (under Section 301) |
| IEEPA Surcharge | +10% (for Chinese/HK products, effective Nov 10, 2025) |
| Total Rate | 35% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligible? | ❌ No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:6815.19.00.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- "USITC Surcharge 25%" comes from Section 301 of the U.S. Trade Act; - "IEEPA 10%" is the additional tariff under the International Emergency Economic Powers Act for Chinese products; - Total 35%, which is a high tariff, must be anticipated in advance!
🎯 2. 3921.90.50.10 —— Decorative Laminates (High-Pressure)
| Item | Content |
|---|---|
| Base Tariff | 4.8% |
| USITC Surcharge | +25% |
| IEEPA Surcharge | +10% |
| Total Rate | 39.8% |
| Tax Calculation | CIF Value × 39.8% |
| De Minimis Eligible? | ❌ No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3921.90.50.10 → FOOTNOTE:9903.88.01 |
📌 Note:
- This is the most likely classification for decorative advertising panels; - The base tariff is slightly higher than non-decorative plastics, but the structure is similar; - Total 39.8%, very high cost.
🎯 3. 3921.90.40.10 —— Plastics with Paper Surface (Variant Interpretation)
| Item | Content |
|---|---|
| Base Tariff | 4.2% |
| USITC Surcharge | +25% |
| IEEPA Surcharge | +10% |
| Total Rate | 39.2% |
| Tax Calculation | CIF Value × 39.2% |
| De Minimis Eligible? | ❌ No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3921.90.40.10 → FOOTNOTE:9903.88.01 |
📌 Note:
- Slightly lower base rate (4.2%) due to specific sub-category; - Still subject to full surcharges; - Total 39.2%, similar to other plastic categories.
🎯 4. 3921.90.50.50 —— Other Plastic Sheets/Plates (General)
| Item | Content |
|---|---|
| Base Tariff | 4.8% |
| USITC Surcharge | +25% |
| IEEPA Surcharge | +10% |
| Total Rate | 39.8% |
| Tax Calculation | CIF Value × 39.8% |
| De Minimis Eligible? | ❌ No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3921.90.50.50 → FOOTNOTE:9903.88.01 |
📌 Note:
- General "Other" category for plastic sheets; - Same surcharges apply; - Total 39.8%, high cost.
🛠️ IV. Customs Clearance Practical Advice (Practical Pitfall Avoidance Guide)
✅ 1. Document Checklist (All are mandatory)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Includes dimensions, material composition, surface treatment, usage |
| ✅ Material Composition Report | ✔️ | Details the percentage of plastic vs. textile reinforcement |
| ✅ Product Photos (including label) | ✔️ | Clear images of the panel, showing texture, thickness, and finish |
| ✅ Third-Party Test Report | ✔️ | If applicable: RoHS, REACH, UV resistance, flame retardancy |
| ✅ Commercial Invoice | ✔️ | Must specify "Textile-Reinforced Plastic Advertising Panel" |
| ✅ Packing List | ✔️ | Details packaging, weight, dimensions |
| ✅ Certificate of Origin (CO) | ✔️ | If not Chinese origin, can apply for preferential rates |
✅ 2. Declaration Tips (Key Mantra)
🔥 “Material Clear, Form Accurate, Label Specific, Tax Predictable!”
| Situation | Correct Declaration | Wrong Practice |
|---|---|---|
| Decorative advertising panel | 3921.90.50.10 or 3921.90.50.50 |
Misclassify as "textile" → Higher duties or rejection |
| Composite panel with strong structural textile | 6815.19.00.00 |
Misclassify as simple plastic → 39.8% vs 35% (minor diff, but consistency matters) |
| Small samples for testing | Declare as "Samples" | Do not hide quantity or value |
| Mixed shipments (panels + frames) | Declare separately | Bundle together → Incorrect classification |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Panels | Provide design specs and material certs to avoid "generic" classification |
| Flame-Retardant Panels | Must declare flame retardancy; may require UL or equivalent testing |
| Outdoor vs. Indoor Use | Specify usage; outdoor panels may need UV resistance certification |
| Large Format Panels | Ensure packaging dimensions are accurate to avoid volumetric weight charges |
🌍 V. Global Major Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3921.90.50.10 / 3921.90.50.50 |
39.2%~39.8% (China origin) | RoHS, REACH, UL (if applicable) | High surcharges apply |
| 🇨🇳 China | 3921.90.50.10 |
4.8%~13% | CCC (if electrical components included) | No additional surcharges |
| 🇪🇺 EU | 3921.90.50.10 |
6.5% (standard) | CE, RoHS, REACH | No additional surcharges |
| 🇦🇺 Australia | 3921.90.50.10 |
5% | RCM | No additional surcharges |
| 🇯🇵 Japan | 3921.90.50.10 |
0%~6% | PSE (if electrical) | No additional surcharges |
📌 Conclusion:
- USA is the only major market with significant additional tariffs for Chinese-origin plastic panels; - China-origin panels face 39.2%~39.8% total duties in the US, which is very high; - Consider supply chain diversification (e.g., Vietnam, Mexico) to avoid US surcharges.
📌 VI. Common Errors & Pitfall Avoidance Guide (Lessons from Tears)
❌ Error 1: Declaring "Textile-Reinforced Plastic Panel" as "Textile Product"
👉 Consequence: Wrong chapter classification → Delayed clearance or rejection.
❌ Error 2: Not specifying "Plastic" material in declaration
👉 Consequence: Customs may classify as "Unspecified Composite" → Higher duties or penalties.
❌ Error 3: Omitting "Advertising/Decorative" usage
👉 Consequence: May be classified as "General Purpose Plastic Sheet" → Different duty rate (still high, but inconsistent).
❌ Error 4: Ignoring USITC/IEEPA surcharges in cost calculation
👉 Consequence: Underestimating landed cost → Profit margin erosion.
✅ Correct Practice:
“Textile-Reinforced Plastic Advertising Panel, Decorative Laminate, 4mm Thickness, UV Resistant, Model XYZ, RoHS Certified”
🎯 VII. Conclusion: Professional Declaration, Save Time, Reduce Cost!
🎯 Remember the Mantra:
🔹 “Material Plastic, Form Panel, Decorative Layer, Tax 39.8%”
🔹 “HS Code Defines Destiny, Tax Rate Difference Matters, Declaration Error Leads to Penalty!”
📌 Tips:
- If your panels are originating from Vietnam, Mexico, Thailand, or Malaysia, you may apply for IEEPA Exemptions, reducing tariffs to 0%~5%;
- Recommend applying for Advance Ruling before shipment to avoid clearance risks.
📣 Immediate Action:
📞 Contact professional customs broker + Provide product specs + Apply for HS Code Advance Ruling
🚀 Let your advertising panels clear customs smoothly, export efficiently, and maximize profits!
✨ Professional clearance starts with accurate classification!
💼 Every penny of your cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.