螺丝取出头

Based on the provided data, here is the detailed classification and customs clearance guide for "Screw Extractor Bits" (螺丝取出头).

🛠️ Screw Extractor Bits (Screw Out Heads)

🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Are "Screw Extractors" Just Hand Tools?

Screw Extractor Bits are specialized interchangeable tools designed to remove broken, stripped, or seized screws and bolts. They are typically inserted into a power drill or hand-held driver, using a reverse rotation mechanism to grip and extract the damaged fastener.

In international trade, these fall under two main categories based on their primary function and compatibility:

1. Direct Hand/Power Tool Attachment (Threaded/Tapping Tools): If the extractor is designed specifically for tapping or threading operations (creating or cutting threads), it falls under interchangeable tools for machine tools.
2. General Extraction/Grasping Tools: If the extractor is designed merely to grip and remove (without cutting threads) and is a "tool for handtools," it falls under general interchangeable tools for handtools.

⚠️ Critical Classification Distinction:
- If the tool is explicitly a Tapping/Threading tool (cutting threads) → HS Code 8207.40.60.00 (Low Tariff).
- If the tool is a General Extraction/Gripping tool (for handtools, not cutting metal) → HS Code 8207.90.60.00 (High Tariff due to "Other").
- Note: If used as a "Tool Holder" for a machine, it may fall under 8466.10.01.75 (High Tariff).

📦 II. HS Code Classification Details (2026 Latest Tariff Authority)

🔍 Key Warning:
- Do not confuse "Screw Extractor" with "Tool Holder": If you ship a holder that fits a machine (e.g., a collet for an automatic machine), you risk HS Code 8466 (28.9% tax).
- Do not confuse "Extraction" with "Threading": If the extractor cuts threads as it removes the screw, it is a Tapping Tool (8207.40) (0% tax). If it only grips (e.g., fluted, spiral, left-handed), it is "Other" (8207.90) (29.3% tax).

💰 III. 2026 Latest Tariff Rate Details (Including Additional Duties)

✅ Applicable Country: USA (US)
✅ Origin: China (CN)
✅ Effective Date: Current Tariff Regime (Section 301 / IEEPA)

🎯 1. 8205.10.00.00 — Drilling, Threading, Tapping Tools (Hand Tools)

📌 Explanation:
- This code covers standard hand tools like T-Wrenches or Tap Drives.
- No extra tax applies. Ideal for manual extraction tools.

🎯 2. 8205.59.55.60 — Other Handtools (Iron/Steel)

📌 Explanation:
- Covers general manual extraction heads (non-power driven) made of iron or steel.
- No extra tax applies.

🎯 3. 8466.10.01.75 — Tool Holders & Self-Opening Dieheads (Machine Parts)

📌 Explanation:
- High Risk Zone: If the "screw extractor" is sold as a machine part (e.g., a holder for a CNC milling machine), it is taxed at 28.9%.
- Do not misdeclare as a hand tool if it is clearly a machine accessory.

🎯 4. 8207.40.60.00 — Tools for Tapping/Threading (Interchangeable)

📌 Explanation:
- If your extractor cuts threads to remove the screw (e.g., spiral flute taps that act as extractors), classify here.
- 0% Tax. Highly recommended if the product fits this description.

🎯 5. 8207.90.60.00 — Other Interchangeable Tools for Handtools (Non-Cutting)

📌 Explanation:
- High Risk Zone: This is the most common code for standard spiral screw extractors that grip but do not cut threads.
- Total 29.3%: Includes 4.3% base + 25% Section 301 tax.
- Must be declared accurately: Do not hide this as "Handtools" if it is an "Interchangeable Tool".

🛠️ IV. Practical Clearance Suggestions (Avoiding Pitfalls)

✅ 1. Documentation Checklist (Must-Have)

✅ 2. Declaration Strategy (The Golden Rule)

🔥 "Cutting vs. Gripping: Name it Right, Save 29%!"

📌 Strategy Tip:
- If the extractor cuts threads (even if just to extract), always argue for 8207.40.60.00 to get 0% tax.
- If it is purely gripping (e.g., "Easy Out" brand), you must pay 29.3%. Do not try to hide it as 8205 (Handtools) as it is technically an "Interchangeable Tool" for power tools.

✅ 3. Special Case Handling

🌍 V. Global Market Comparison (2026)

📌 Conclusion:
- USA is the most expensive market for "Gripping" screw extractors (29.3%).
- Optimization: If your product design allows, market it as a "Tapping/Threading Tool" (cuts threads) to qualify for 0% tax in the US.

📌 VI. Common Mistakes & Pitfalls (Learn from Others)

❌ Mistake 1: Calling a Gripping Extractor a "Handtool" (8205) to avoid tax.
👉 Result: Customs will classify it as "Interchangeable Tool" (8207.90) → 29.3% Tax + Fine.

❌ Mistake 2: Calling a Cutting Extractor an "Other Tool" (8207.90).
👉 Result: You pay 29.3% when you could have paid 0% by correctly declaring as 8207.40.

❌ Mistake 3: Declaring a Machine Holder as a "Screw Extractor".
👉 Result: Classified as 8466 (Machine Part) → 28.9% Tax + Potential denial of "Handtool" status.

❌ Mistake 4: Missing "Interchangeable" keyword in description.
👉 Result: Customs assumes it is a hand tool, but the product is designed for power drills → Audit Risk.

✅ Correct Action:

"Interchangeable Screw Extractor Bit (Gripping Type), For Power Drill, High-Speed Steel, Model X-100"
OR
"Interchangeable Tapping/Threading Tool (Screw Extractor), For Power Drill, HSS, Model T-200"

🎯 VII. Conclusion: Precision Declares, Profits Grow!

🎯 Key Takeaway:

🔹 Gripping Extractor (No Cutting) = 29.3% Tax (8207.90.60.00).
🔹 Cutting Extractor (Threading) = 0% Tax (8207.40.60.00).
🔹 Handheld Wrench = 0% Tax (8205.10.00.00).

🚀 Action Plan:
1. Review Product Design: Does it cut threads? If yes, declare 8207.40.60.00.
2. Check Packaging: Ensure the label says "Interchangeable Tool" if it requires a power drill.
3. Prepare Docs: Have a spec sheet proving the function (Cutting vs. Gripping).
4. Consult Customs: If unsure, file an Advance Ruling to avoid the 29.3% surprise.

📌 Final Tip:

For the US market, classification is everything. A slight difference in function (cutting vs. gripping) changes the tax from 0% to 29.3%. Always prioritize the "Cutting" classification if your tool has cutting edges.

✨ Professional Clearance Starts with Accurate Classification!
💼 Don't let "Screw Extractor" cost you 29% of your profit!