裁缝尺
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4421999880 | 38.3% | CN | US | Official Doc |
| 4421919880 | 38.3% | CN | US | Official Doc |
| 3926100000 | 15.3% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 9017800000 | 40.3% | CN | US | Official Doc |
| 9017208080 | 39.6% | CN | US | Official Doc |
Product Images
AI Analysis
📏 Tailor’s Ruler (Measuring Tools for Length Measurement)
🌐 HS Code Classification & Customs Clearance Guide | 2026 Latest Tariff Breakdown | Expert Strategy for Global Trade
📌 One: Product Definition & Classification – What Exactly Is a Tailor’s Ruler?
A tailor’s ruler is a precision measuring instrument used in sewing, fashion design, tailoring, and craft work to measure linear dimensions accurately. It is typically a straight, rigid tool marked with metric and/or imperial units (e.g., cm, mm, inches).
In international trade, its classification depends heavily on material, intended use, and functional purpose — not just appearance.
⚠️ Critical Distinction:
- If primarily used for measuring length → Likely falls under measuring instruments (HS 9017)
- If made of plastic, used in school or office settings → May be classified as plastic stationery (HS 3926)
- If made of wood → Could fall under wooden tools (HS 4421)
- If not intended for measurement, but just a decorative or general-purpose ruler → May be misclassified
📦 Two: HS Code Classification Details (2026 Official Tariff Matrix)
| HS Code | Product Description | Key Features | Material Assumption | Applicable Use Case |
|---|---|---|---|---|
9017.20.80.80 |
Other measuring instruments for length (e.g., rulers, tape measures) | Used for drawing, marking, or mathematical calculation | Plastic or metal | Primary classification: Functional measuring tool |
3926.10.00.00 |
Plastic stationery and office supplies | Commonly used in schools and offices | Plastic (based on common use) | Non-measurement use, school supplies |
3926.90.99.89 |
Other plastic articles not elsewhere specified | Includes miscellaneous plastic tools | Plastic | General-purpose plastic item |
9017.80.00.00 |
Other hand-held instruments for measuring length | Designed for manual use in measurement tasks | Plastic or metal | Functional measurement device |
4421.99.98.80 |
Other wooden articles not elsewhere specified | Non-specific wooden tools or small devices | Wood (less common) | Rare case; only if wooden ruler |
🔍 Key Insight:
- Plastic rulers are not automatically "office supplies" — if they serve a measuring function, they belong in HS 9017. - The purpose (measurement vs. stationery) determines classification, not just material.
💰 Three: 2026 Latest Tariff Breakdown (U.S. Import Rules – China Origin)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (inclusive)
✅ Legal Basis: IEEPA + USITC Section 301 + Section 122 of Trade Act
🎯 1. 9017.20.80.80 — Measuring Instruments for Length (Rulers, Tape Measures)
| Item | Details |
|---|---|
| Base Tariff | 4.6% (ad valorem) |
| Section 301 (USITC) Additional Duty | +25.0% |
| Section 122 (Trade Act) Additional Duty | +10.0% |
| Total Effective Duty | 39.6% |
| Tax Calculation | CIF Value × 39.6% |
| De Minimis Threshold | ❌ Not eligible (denied under IEEPA rules) |
| Legal Pathway | IEEPA:9903.01.25 → USITC:9017.20.80.80 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- This is the most accurate classification for a functional measuring tool. - Despite being made of plastic, it’s not a stationery item — it’s a precision measuring instrument. - The 301 + 122 tariffs apply because it's Chinese-origin and used in industrial/technical applications.
🎯 2. 3926.10.00.00 — Plastic Stationery & Office Supplies
| Item | Details |
|---|---|
| Base Tariff | 5.3% |
| Section 301 (USITC) Additional Duty | +0.0% |
| Section 122 (Trade Act) Additional Duty | +10.0% |
| Total Effective Duty | 15.3% |
| Tax Calculation | CIF × 15.3% |
| De Minimis Threshold | ✅ Eligible (under $800 threshold) |
| Legal Pathway | IEEPA:9903.01.24 → 3926.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- Applies only if the ruler is marketed as a school/office item, not a measuring tool. - Lower tariff, but only valid if the product is truly used for non-technical purposes. - High risk of audit if actual use is measurement-based.
🎯 3. 3926.90.99.89 — Other Plastic Articles (Not Elsewhere Specified)
| Item | Details |
|---|---|
| Base Tariff | 5.3% |
| Section 301 (USITC) Additional Duty | +7.5% |
| Section 122 (Trade Act) Additional Duty | +10.0% |
| Total Effective Duty | 22.8% |
| Tax Calculation | CIF × 22.8% |
| De Minimis Threshold | ✅ Eligible |
| Legal Pathway | IEEPA:9903.01.24 → 3926.90.99.89 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- Used for miscellaneous plastic tools not covered elsewhere. - Higher than stationery, but lower than measuring instruments. - Risk of misclassification if the product is clearly a measuring device.
🎯 4. 9017.80.00.00 — Other Hand-Held Instruments for Measuring Length
| Item | Details |
|---|---|
| Base Tariff | 5.3% |
| Section 301 (USITC) Additional Duty | +25.0% |
| Section 122 (Trade Act) Additional Duty | +10.0% |
| Total Effective Duty | 40.3% |
| Tax Calculation | CIF × 40.3% |
| De Minimis Threshold | ❌ Not eligible |
| Legal Pathway | IEEPA:9903.01.25 → USITC:9017.80.00.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- Most accurate for hand-held measuring tools. - Highest tariff due to Section 301 + 122. - Best fit if the ruler is used in technical, industrial, or craft applications.
🎯 5. 4421.99.98.80 — Other Wooden Articles (Not Elsewhere Specified)
| Item | Details |
|---|---|
| Base Tariff | 3.3% |
| Section 301 (USITC) Additional Duty | +25.0% |
| Section 122 (Trade Act) Additional Duty | +10.0% |
| Total Effective Duty | 38.3% |
| Tax Calculation | CIF × 38.3% |
| De Minimis Threshold | ❌ Not eligible |
| Legal Pathway | IEEPA:9903.01.25 → 4421.99.98.80 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- Applies only if the ruler is made of wood. - Very rare — most tailor’s rulers are plastic or metal. - If wooden, still high tariff due to Section 301/122.
🛠️ Four: Customs Clearance Best Practices (Pro Tips to Avoid Penalties)
✅ 1. Essential Documentation Checklist (Must-Have)
| Document | Required? | Purpose |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Show dimensions, markings, material, intended use |
| ✅ Product Photos (with label) | ✔️ | Prove material (plastic/metal/wood), markings, design |
| ✅ Commercial Invoice | ✔️ | Clearly state “Tailor’s Ruler – Measuring Instrument” |
| ✅ Packing List | ✔️ | Show quantity, weight, packaging |
| ✅ Origin Certificate (CO) | ✔️ | If not from China, may qualify for lower tariffs |
| ✅ Test Report (if applicable) | ✔️ | RoHS, CE, FCC (if electronic components) |
| ✅ Technical Drawing / Diagram | ✔️ | Prove it's a measuring tool (not just a ruler) |
✅ 2.申报技巧（Key Rules to Remember）
🔥 "Function over Form – Measure First, Label Second!"
| Scenario | Correct HS Code | Wrong Code | Risk |
|---|---|---|---|
| Plastic ruler used for sewing, tailoring, design | 9017.80.00.00 or 9017.20.80.80 |
3926.10.00.00 |
40.3% vs 15.3% → 25% extra tax |
| Ruler marketed as "school supply" but used for measurement | 9017.80.00.00 |
3926.10.00.00 |
Audit, penalties, retroactive duties |
| Wooden ruler (rare) | 4421.99.98.80 |
9017.80.00.00 |
Higher tariff, misclassification |
| Ruler with no markings or measurement scale | 3926.90.99.89 |
9017.80.00.00 |
Lower tariff, but risk of rejection |
✅ 3. Special Cases & Risk Mitigation
| Situation | Recommended Action |
|---|---|
| Ruler with both plastic and metal parts | Use 9017.80.00.00 – functional use dominates |
| Ruler sold in school supply kits | Still declare as measuring instrument if used for measurement |
| Ruler with no scale markings | May be classified as 3926.90.99.89 – but risk of audit |
| Ruler used in fashion design studios | Must use 9017.80.00.00 – high-value technical use |
| Ruler exported from Vietnam/Mexico | Apply for IEEPA exemption – possible 0% duty |
🌍 Five: Global Market Tariff Comparison (2026)
| Country | Recommended HS Code | Base Duty | Additional Duties | Total Duty | Certification Required |
|---|---|---|---|---|---|
| 🇺🇸 United States | 9017.80.00.00 |
5.3% | +25% (301) +10% (122) | 40.3% | FCC, RoHS |
| 🇨🇳 China | 9017.80.00.00 |
5% | 0% | 5% | CCC |
| 🇪🇺 European Union | 9017.80.00.00 |
0% | 0% | 0% | CE |
| 🇦🇺 Australia | 9017.80.00.00 |
5% | 0% | 5% | RCM |
| 🇯🇵 Japan | 9017.80.00.00 |
0% | 0% | 0% | PSE |
📌 Insight:
- U.S. is the only market with 301 + 122 tariffs on Chinese-origin measuring tools. - Non-Chinese origin products (e.g., Vietnam, Mexico) may qualify for IEEPA exemption → 0% duty.
📌 Six: Common Mistakes & How to Avoid Them (Real-World Pitfalls)
❌ Mistake 1: Declaring a measuring ruler as 3926.10.00.00 to save 25%
👉 Result: Audit, back duties, penalties, possible seizure
❌ Mistake 2: Using 3926.90.99.89 for a ruler with clear measurement markings
👉 Result: Misclassification – can be challenged by U.S. Customs
❌ Mistake 3: Not including product photos showing scale markings
👉 Result: Delayed clearance, request for clarification
❌ Mistake 4: Failing to declare intended use (e.g., “for tailoring”)
👉 Result: Classification dispute – may be reclassified at port
✅ Correct Declaration Example:
"Plastic Tailor’s Ruler, 30cm, Metric & Imperial Scale, Used for Sewing and Fashion Design, Non-Electrical, Model XYZ"
🎯 Seven: Final Verdict – How to Win the Classification Battle
🎯 Golden Rule:
"If it measures, it’s a measuring tool — regardless of material."
🔹 Best HS Code for Most Cases:
9017.80.00.00– most accurate, highest compliance
🔹 Lowest Risk:9017.20.80.80– also valid for general length measurement
🔹 Avoid:3926.10.00.00unless proven it’s not used for measurement📌 Pro Tip:
Apply for Advance Ruling (Pre-Approval) from U.S. Customs before shipment — avoid surprises.
📣 Act Now: Protect Your Profit Margin!
📞 Contact a licensed customs broker + provide product photos + request HS Code pre-ruling
🚀 Avoid $10k+ in unexpected duties
💼 Ensure smooth, fast, and compliant clearance
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Your product’s HS Code is not just a number — it’s your profit protector.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.