调酒器套装
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323930060 | 62.0% | CN | US | Official Doc |
| 8210000000 | 38.7% | CN | US | Official Doc |
| 7615109100 | 70.6% | CN | US | Official Doc |
| 7323999030 | 88.4% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
Product Images
AI Analysis
🍸 Cocktail Shaker Sets (Mixing Tools for Beverage Preparation)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy 📌 I. Product Definition & Classification: Do You Really Know "Cocktail Shakers"?
A Cocktail Shaker Set is a multi-component tool used in bars, homes, or hospitality industries to mix, chill, and serve beverages. In international trade, the classification hinges entirely on material composition and functional description. Misclassification can lead to massive tariff disparities (from 13.4% to 88.4%).
Core Distinction: * Material Matters: Is it stainless steel, aluminum, plastic, or mixed metal? * Function Matters: Is it defined as general kitchenware or specific beverage preparation equipment?
⚠️ Critical Classification Point: * If made of Stainless Steel → Usually falls under 7323 (Table/Kitchenware). * If made of Aluminum → Usually falls under 7615 (Kitchen/Household Aluminum). * If made of Plastic → Usually falls under 3924 (Plastic Tableware). * If defined specifically as "Beverage Preparation Equipment" → May fall under 8210 (Tools for preparation/supply).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Match)
Based on the provided data, here are the 5 possible HS Codes for Cocktail Shaker Sets, ranked by potential cost impact:
| HS Code | Product Description & Summary | Material Inference | Total Tax Rate | Tax Breakdown Detail |
|---|---|---|---|---|
7615.10.91.00 |
Aluminum Household Item: Shakers inferred as aluminum, categorized as kitchen/household items. | 🧪 Aluminum | 70.6% | Base: 3.1% + Additional: 7.5% + Sec 301 (Steel/Aluminum/Copper): 50% |
8210.00.00.00 |
Beverage Prep Tool: Shakers categorized as utensils for beverage preparation and supply. | 🛠️ General Tool | 38.7% | Base: 3.7% + Additional: 25.0% + Sec 301: 10% (Note: Data implies mixed calculation resulting in 38.7%) |
7323.93.00.60 |
Stainless Steel Kitchenware: Shakers are mostly stainless steel, categorized as kitchen/bar tools. | 🥩 Stainless Steel | 62.0% | Base: 2.0% + Additional: 0.0% + Sec 301 (Steel/Aluminum/Copper): 50% |
7323.99.90.30 |
Metal Kitchen/Tableware: Shakers are metal kitchen or tableware items. | 🥄 Mixed Metal | 88.4% | Base: 3.4% + Additional: 25.0% + Sec 301 (Steel/Aluminum/Copper): 50% |
3924.10.40.00 |
Plastic Tableware: Shaker sets judged as plastic material, categorized as tableware/kitchenware. | 💎 Plastic | 13.4% | Base: 3.4% + Additional: 0.0% + Sec 301: 10% |
🔍 Key Observation: * Plastic (
3924.10.40.00) is the most cost-effective option with a total tax of 13.4%. * Stainless Steel (7323.93.00.60) has a moderate tax of 62.0%, driven heavily by the 50% Section 301 tariff on Steel. * Aluminum (7615.10.91.00) carries a high tax of 70.6%, also due to the 50% Section 301 tariff on Aluminum. * General Tool Classification (8210.00.00.00) offers a mid-range tax of 38.7%, but requires justification as "preparation equipment" rather than just "kitchenware." * Generic Metal (7323.99.90.30) is the most expensive at 88.4%, combining 25% additional tariff + 50% Section 301.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US) ✅ Origin: China (CN) ✅ Effective Time: Post-November 10, 2025 (Including subsequent imports)
🎯 1. 3924.10.40.00 – Plastic Tableware (Lowest Risk)
| Item | Content |
|---|---|
| Base Rate | 3.4% |
| USITC Surcharge | 0.0% |
| IEEPA Surcharge | 10% (Section 301 for Plastic/Kitchenware) |
| Total Tax Rate | 13.4% |
| Tax Calculation | CIF Value × 13.4% |
| De Minimis Eligibility | ❌ No (Subject to strict Section 301 rules if >$800, but generally lower rate applies) |
| Legal Basis Path | IEEPA:3924 → USITC:3924.10.40.00 |
📌 Explanation: * Plastic kitchenware does not attract the harsh 50% Section 301 tariff applied to steel and aluminum. * This is the most economical classification if the product is predominantly plastic.
🎯 2. 8210.00.00.00 – Beverage Preparation Tools (Mid-Range)
| Item | Content |
|---|---|
| Base Rate | 3.7% |
| USITC Surcharge | 25.0% (Section 301 General) |
| IEEPA Surcharge | 10% (Note: Data shows 38.7% total, implying specific interaction of surcharges) |
| Total Tax Rate | 38.7% |
| Tax Calculation | CIF Value × 38.7% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | IEEPA:8210 → USITC:8210.00.00.00 |
📌 Explanation: * This code requires proving the shaker is a "tool for preparation" rather than just a container. * Avoids the 50% steel/aluminum-specific surcharge, making it cheaper than steel/aluminum codes.
🎯 3. 7323.93.00.60 – Stainless Steel Kitchenware (High Cost)
| Item | Content |
|---|---|
| Base Rate | 2.0% |
| USITC Surcharge | 0.0% |
| IEEPA Surcharge | 50% (Specific for Steel/Aluminum/Copper Products) |
| Total Tax Rate | 62.0% |
| Tax Calculation | CIF Value × 62.0% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 (Steel/Aluminum/Copper 50%) → USITC:7323.93.00.60 |
📌 Explanation: * Crucial Point: The 50% tariff is explicitly levied on Steel, Aluminum, and Copper products under Section 301/IEEPA. * Even though the base rate is low (2%), the 50% surcharge makes this highly expensive.
🎯 4. 7615.10.91.00 – Aluminum Household Item (Very High Cost)
| Item | Content |
|---|---|
| Base Rate | 3.1% |
| USITC Surcharge | 7.5% |
| IEEPA Surcharge | 50% (Specific for Steel/Aluminum/Copper Products) |
| Total Tax Rate | 70.6% |
| Tax Calculation | CIF Value × 70.6% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | IEEPA:7615 (Aluminum 50%) → USITC:7615.10.91.00 |
📌 Explanation: * Aluminum is also subject to the 50% Section 301 surcharge. * Combined with a 7.5% base surcharge, this totals 70.6%.
🎯 5. 7323.99.90.30 – Metal Tableware (Highest Cost)
| Item | Content |
|---|---|
| Base Rate | 3.4% |
| USITC Surcharge | 25.0% |
| IEEPA Surcharge | 50% (Specific for Steel/Aluminum/Copper Products) |
| Total Tax Rate | 88.4% |
| Tax Calculation | CIF Value × 88.4% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | IEEPA:7323 (Steel 50%) → USITC:7323.99.90.30 + FOOTNOTE |
📌 Explanation: * This is the worst-case scenario. * It combines a 25% general surcharge with the 50% steel-specific surcharge. * Total Tax: 88.4%. Do not use this code unless absolutely necessary.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Preparation Checklist (Non-negotiable)
| Document | Required | Explanation |
|---|---|---|
| ✅ Product Composition Report | ✔️ | Must specify % of Plastic vs. Stainless Steel vs. Aluminum. Crucial for HS Code selection. |
| ✅ Product Photos (Internal/External) | ✔️ | Show handles, filters, and material texture. Plastic vs. Metal must be visually distinct. |
| ✅ Commercial Invoice | ✔️ | Clearly state material: "Plastic Cocktail Shaker Set" or "Stainless Steel Shaker". |
| ✅ Usage Description | ✔️ | Define use: "For mixing beverages" (supports 8210) vs. "For home kitchen use" (supports 7323/7615). |
| ✅ Packing List | ✔️ | Ensure all parts (shaker, strainer, jigger) are included in one shipment to avoid split classification. |
✅ 2. Declaration Strategy (Key Mantra)
🔥 “Material Defines Code, Surcharge Defines Cost!”
| Scenario | Correct HS Code | Avoid If... |
|---|---|---|
| Plastic Set | 3924.10.40.00 (13.4%) |
Claiming it's metal to look "premium" (leads to wrong code & audit). |
| Stainless Steel Set | 7323.93.00.60 (62.0%) |
Using 7323.99.90.30 (88.4%) – Save 26.4% by using correct subheading! |
| Aluminum Set | 7615.10.91.00 (70.6%) |
Using generic metal codes. Note: Aluminum has 50% surcharge. |
| Multi-Material Set | Primary Material Rule | Do not mix declarations. If >50% is steel, use steel code. |
| Tool-Only (No Cup) | 8210.00.00.00 (38.7%) |
Declaring as "kitchenware" if it's strictly a mixing tool. |
📌 Pro Tip: * If your shaker set is Stainless Steel, ensure you use 7323.93.00.60 (62.0%) instead of 7323.99.90.30 (88.4%). The difference is 26.4% on the CIF value. * If your product is Plastic, stick to 3924.10.40.00 (13.4%). It is significantly cheaper than any metal option.
✅ 3. Special Circumstances
| Situation | Handling Advice |
|---|---|
| OEM Custom Metal Shakers | Provide material certification (e.g., AISI 304/316 for steel) to justify 7323.93.00.60. |
| Mixed Material (e.g., Steel Body + Plastic Handle) | Declare based on essential character (usually Steel). Expect 62%+ tax. |
| Gift Sets (Shaker + Glass + Spoon) | If primarily a shaker, classify the whole set as 3924 or 7323. Do not split. |
| Commercial vs. Home Use | Both 7323 and 8210 can apply. 8210 might be argued for professional bar tools, but 7323 is safer for general kitchenware. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Est. Tax (China Origin) | Certifications Required | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3924.10.40.00 (Plastic) |
13.4% | FDA (Food Contact) | Cheapest Option. Steel/Aluminum face 62-88% tax. |
| 🇺🇸 USA | 7323.93.00.60 (Steel) |
62.0% | FDA (Food Contact) | High tax due to 50% Steel Surcharge. |
| 🇨🇳 China | 7323.93.00.60 |
5-10% | None (Domestic) | Low tax for domestic sale. |
| 🇪🇺 EU | 7323.93.00 |
0-2% | LFGB (Food Safety) | No Section 301 tariffs. Favorable for Steel. |
| 🇬🇧 UK | 7323.93.00 |
0-4% | FSA Compliant | Post-Brexit rules similar to EU. |
| 🇦🇺 Australia | 7323.93.00 |
5% | ACMA (if electronic) | Standard MFN rates. |
📌 Conclusion: * USA is the most punitive market for metal cocktail shakers due to Section 301/IEEPA 50% surcharges. * Plastic (
3924.10.40.00) is the strategic choice for the US market to minimize costs. * For EU/UK, Stainless Steel is tax-efficient and preferred for quality perception.
📌 VI. Common Errors & Pitfall Guide (Lessons from Blood and Tears)
❌ Error 1: Classifying Stainless Steel shakers as 7323.99.90.30 (88.4%)
👉 Consequence: Paying 26.4% more tax than necessary. Use 7323.93.00.60 (62.0%) instead.
❌ Error 2: Classifying Plastic shakers as 7615 (Aluminum) or 7323 (Steel)
👉 Consequence: Tax jumps from 13.4% to 70.6%. Huge unnecessary cost.
❌ Error 3: Ignoring the 50% Steel/Aluminum Surcharge 👉 Consequence: Budgeting errors. Many importers forget that Steel/Aluminum/Copper face a specific 50% IEEPA surcharge, making metal options very expensive in the US.
❌ Error 4: Declaring "Shaker Set" without material specification 👉 Consequence: Customs may assign the highest default rate (88.4%) or delay clearance for valuation.
✅ Correct Practice:
"Cocktail Shaker Set, Plastic, 3-piece, BPA-Free, FDA Compliant, Model XYZ" →
3924.10.40.00"Stainless Steel Cocktail Shaker, 18/8 Grade, Bar Tool, Model ABC" →7323.93.00.60
🎯 VII. Conclusion: Professional Declaration, Save Money!
🎯 Remember the Mantra:
🔹 "Plastic is King in US (13.4%), Steel is Heavy (62-88%), Plastic is Light (13.4%)." 🔹 "Don't use 7323.99 (88.4%) if 7323.93 (62.0%) fits!" 🔹 "Material Dictates the Surcharge!"
📌 Tips:
* If you are exporting to the USA, strongly consider Plastic or BPA-Free Polymer shaker sets to enjoy the 13.4% rate.
* If you must use Stainless Steel, ensure your invoice and description clearly match 7323.93.00.60 to avoid the 88.4% penalty.
* Always include Material Composition in your customs documents.
📣 Immediate Action:
📞 Consult with your customs broker to verify the primary material of your shaker set. 🚀 Optimize your HS Code. Cut your tax by 50%. Ship smarter!
✨ Professional Clearance Starts with Precise Classification! 💼 Every percent saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.