透明包装胶带 5cm以内
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3919102030 | 40.8% | CN | US | Official Doc |
| 3506911000 | 35.0% | CN | US | Official Doc |
| 3506915000 | 37.1% | CN | US | Official Doc |
| 4811412100 | 35.0% | CN | US | Official Doc |
AI Analysis
🎞️ Transparent Transfer Tape ≤ 5cm | Ultimate HS Code Classification & Customs Clearance Guide
🌐 HS Code Reference & Customs Strategy | 2026 Latest Tariff Analysis | Professional Clearance Protocol
📌 1. Product Definition & Classification: What is "Transparent Transfer Tape (≤ 5cm)"?
Transparent Transfer Tape is a specialized adhesive product used primarily in screen printing, digital printing, and industrial labeling. Unlike standard packing tape, its key feature is its temporary tackiness—it holds items in place during processing and releases cleanly afterwards without leaving residue.
In international trade, this product sits at the intersection of Textiles/Packaging and Chemical Adhesives. Classification depends entirely on the substrate (base material) and the primary function.
⚠️ Critical Distinction:
- If the primary identity is the carrier material (e.g., plastic film, paper) used for masking or taping → It may fall under Chapter 39 (Plastics) or Chapter 48 (Paper).
- If the primary identity is the adhesive function (e.g., polymer-based bonding agent applied to a carrier) → It may fall under Chapter 35 (Animal/ Vegetable/ Industrial Glues).
📦 2. HS Code Classification Details (2026 Latest Tariff Alignment)
Based on the specific attributes of "Transparent Transfer Tape (Width ≤ 5cm)", here are the four most likely HS Code classifications with corresponding tax details.
| HS Code | Product Description | Classification Logic | Total Tax Rate | Tax Breakdown |
|---|---|---|---|---|
3919.10.20.30 |
Transparent Tape (Plastic/Film Basis) | Match Successful: The product is explicitly described as "Transparent" and "Not exceeding 5 cm in width." It is classified as self-adhesive plastic tape. | 40.8% | Base Duty: 5.8% + Section 301: 25.0% + Section 122: 10.0% |
3506.91.10.00 |
Other Adhesives (Polymer-based) | Form Match: Classified as a "Tape" which fits the physical form of adhesives. Material is inferred to contain polymer components. Used for binding/adhering. | 35.0% | Base Duty: 0.0% + Section 301: 25.0% + Section 122: 10.0% |
3506.91.50.00 |
Adhesives Based on Polymers | Material/Function Match: Inferred material is polymer; function is adhesive. Fits "Adhesives based on polymers" description. | 37.1% | Base Duty: 2.1% + Section 301: 25.0% + Section 122: 10.0% |
4811.41.21.00 |
Self-Adhesive Paper Rolls | Substrate Inference: If the tape backing is paper rather than plastic, it is classified as self-adhesive paper in rolls. Common for low-cost transfer tapes. | 35.0% | Base Duty: 0.0% + Section 301: 25.0% + Section 122: 10.0% |
🔍 Key Insight:
-3919.10.20.30is the most accurate classification for high-quality plastic/film-based transparent transfer tapes because it specifically addresses "Tape" with width restrictions.
-3506...codes are used if customs authorities prioritize the adhesive chemical nature over the physical tape form.
-4811...is only applicable if the backing material is paper. If it is BOPP or PET film, this code is incorrect.
💰 3. Detailed Tariff Rate Explanation (US Market)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (and onwards)
🎯 1. 3919.10.20.30 – Self-Adhesive Tape of Plastics, < 5cm Width
| Item | Detail |
|---|---|
| Base Duty Rate | 5.8% (Ad valorem) |
| Section 301 Duty | +25.0% (Added tariff on Chinese imports) |
| Section 122 Duty | +10.0% (Additional tariff under IEEPA/Section 122) |
| Total Effective Tax | 40.8% |
| Calculation | CIF Value × 40.8% |
| De Minimis Exemption | ❌ Not Eligible (Value exceeds $800 threshold or is restricted by Section 301/122) |
| Legal Basis Path | USITC:3919.10.20.30 → SECTION301:9903.88.01 → SECTION122:IEEPA |
📌 Explanation:
- The 5.8% is the standard MFN (Most Favored Nation) rate for plastic tapes.
- The 25% is the well-known Section 301 tariff on Chinese goods.
- The 10% is the Section 122 tariff, often applied to specific categories or as a supplemental duty.
- Total Cost Impact: This is a high-tax category. Importers must factor in nearly half the product value in duties.
🎯 2. 3506.91.10.00 & 3506.91.50.00 – Adhesives
| Item | Detail |
|---|---|
| Base Duty Rate | 0.0% (for 3506.91.10) / 2.1% (for 3506.91.50) |
| Section 301 Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Total Effective Tax | 35.0% (for .10) / 37.1% (for .50) |
| Legal Basis Path | USITC:3506.91.x0.00 → SECTION301:9903.88.01 → SECTION122:IEEPA |
📌 Note:
- Classifying under Chapter 35 can save 3.7% - 5.8% in base duties compared to Chapter 39.
- However, customs may challenge this classification if the product is predominantly a "tape" (Chapter 39) rather than a "bulk adhesive" applied to a carrier.
🎯 3. 4811.41.21.00 – Self-Adhesive Paper
| Item | Detail |
|---|---|
| Base Duty Rate | 0.0% |
| Section 301 Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Total Effective Tax | 35.0% |
| Legal Basis Path | USITC:4811.41.21.00 → SECTION301:9903.88.01 → SECTION122:IEEPA |
📌 Note:
- Only valid for paper-backed tapes.
- If the tape is plastic-backed (BOPP/PET), using this code is a misclassification and can lead to penalties.
🛠️ 4. Practical Customs Clearance Advice
✅ 1. Documentation Checklist (Mandatory)
| Document | Required? | Purpose |
|---|---|---|
| Product Specification Sheet | ✅ Yes | Must specify: Width (≤5cm), Material (Plastic/Paper), Adhesive Type, Backing Material. |
| Commercial Invoice | ✅ Yes | Clearly state: "Transparent Transfer Tape, Width 5cm, HS Code [Chosen Code]". |
| Packing List | ✅ Yes | Show dimensions, weight, and quantity. |
| Material Safety Data Sheet (MSDS) | ✅ Yes | To confirm adhesive composition (polymer-based vs. solvent-based). |
| Proof of Origin | ✅ Yes | Certificate of Origin to apply correct tariff codes. |
| Photos of Product | ✅ Yes | Show the roll, label, and any packaging indicating dimensions. |
✅ 2. Classification Strategy (Key Tips)
🔥 “Material First, Function Second! Width Matters!”
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Plastic/Film Backing (Most Common) | 3919.10.20.30 |
Specific for "Tape" made of plastics. Most defensible for standard transfer tapes. |
| Paper Backing | 4811.41.21.00 |
Only if the backing is clearly paper. Cheaper base duty. |
| Specialty Polymer Adhesive | 3506.91.10.00 |
If the adhesive value significantly exceeds the substrate value, or if marketed as an "adhesive product." |
⚠️ Warning:
- Do not use3919.10.20.30if the tape is wider than 5cm.
- Do not use4811...if the backing is plastic.
- Misclassification can lead to seizure, fines, and back-taxes.
✅ 3. Special Cases
| Case | Recommendation |
|---|---|
| OEM/White Label | Provide contract showing buyer specifications to prove intended use (e.g., for screen printing vs. packing). |
| Composite Goods | If the tape comes with a dispenser, declare the tape and dispenser separately if possible, or classify as a set if duty-free on the main item. |
| High-Value Transfer Tape | Consider applying for a Section 301 Exclusion if applicable (check current exclusion lists). |
🌍 5. Global Market Comparison (2026)
| Country | Recommended HS Code | Base Duty | Section 301/Added | Total Est. | Remarks |
|---|---|---|---|---|---|
| 🇺🇸 USA | 3919.10.20.30 |
5.8% | +35.0% | 40.8% | High cost; strict documentation needed. |
| 🇪🇺 EU | 3919.10 |
6.5% | 0% | 6.5% | No Section 301; lower cost if shipped from China. |
| 🇨🇳 China | 3919.10 |
5% | 0% | 5% | Low duty for domestic sales or export re-import. |
| 🇯🇵 Japan | 3919.10 |
6% | 0% | 6% | Standard MFN rate. |
📌 Conclusion:
- The USA market is the most expensive due to combined Section 301 and Section 122 tariffs.
- EU/Japan do not apply these additional duties, making them more cost-effective for Chinese-made goods.
📌 6. Common Mistakes & Pitfalls
❌ Mistake 1: Declaring plastic tape as 4811 (Paper) to save taxes.
👉 Consequence: Customs audit, back-taxes, and penalties. Plastic backing is obvious under inspection.
❌ Mistake 2: Ignoring the 5cm width limit in 3919.10.20.30.
👉 Consequence: If width > 5cm, it falls under 3919.10.20.90 (Other), which may have different base duties or restrictions.
❌ Mistake 3: Using 3506 for standard packing tape.
👉 Consequence: Customs may reject Chapter 35 classification for finished "tapes" unless the adhesive component is the primary value.
✅ Correct Approach:
"Transparent Transfer Tape, BOPP Film Backing, Width 3cm, Adhesive: Acrylic, For Screen Printing Use."
🎯 7. Conclusion: Professional Clearance, Cost Efficiency
🎯 Remember the Golden Rule:
🔹 “Plastic Backing? Go 39. Paper Backing? Go 48. Adhesive Focus? Go 35.”
🔹 “Width ≤ 5cm is key for 3919.10.20.30. > 5cm is a different story.”
📌 Pro Tip:
If your product qualifies for a Section 301 Exclusion, apply immediately. The savings of 25% are significant.
For high-volume imports, consider Advance Rulings from CBP to secure your HS Code classification legally.
📣 Act Now:
📞 Contact a licensed customs broker + Provide product samples + Request CBP Advance Ruling
🚀 Ensure smooth clearance, predictable costs, and zero surprises!
✨ Professional classification starts with precise knowledge!
💼 Every percentage point of duty saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.