铝箔隔热胶带
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7607205000 | 17.5% | CN | US | Official Doc |
| 3919102055 | 40.8% | CN | US | Official Doc |
AI Analysis
🧪 Aluminum Foil Insulation Tape
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Aluminum Foil Tape"?
Aluminum foil insulation tape is a critical material in construction, HVAC (Heating, Ventilation, and Air Conditioning), and industrial sealing applications. In international trade, it is primarily classified based on its backing material and thickness.
However, for self-adhesive products, there is a strict hierarchy in customs classification: 1. Plastic-Backed Self-Adhesive Tapes: Even if one side is aluminum, if the backing material providing the structural integrity is plastic (e.g., PET, PVC, PE), it often falls under Chapter 39 (Plastics). 2. Non-Plastic/Other Backing Tapes: If the backing is paper, cloth, or pure foil without plastic, it may fall under Chapter 76 (Aluminum).
⚠️ Key Distinction Point:
- If the tape has a plastic film backing (common in insulation tapes like PET or PVC) + self-adhesive → HS 3919.90.50.60
- If the product is pure aluminum foil (thickness ≤ 0.2mm), printed or unprinted, with or without paper backing (but no plastic backing) → HS 7607.19.30.00 or HS 7607.20.50.00
- Note: In your provided data, HS 7607 codes are for "Aluminum Foil" specifically, not "Tape" in the plastic sense. If your "foil tape" uses a plastic adhesive backing, it likely belongs to Chapter 39. However, we will analyze both scenarios as per the provided<DATA>.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Backing Material |
|---|---|---|---|
3919.90.50.60 |
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls: Other: Other Other | Plastic-backed foil tapes, self-adhesive insulation tapes with PET/PVC backing, width ≤ 20cm | ✅ Plastic (PET, PVC, PE, etc.) |
7607.19.30.00 |
Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: Backed: Other | Thick-backed aluminum foil, printed/unprinted, thickness > 0.15mm but ≤ 0.2mm, backed with paper/plastic | ✅ Aluminum Foil (≤0.2mm) |
7607.20.50.00 |
Aluminum foil... not exceeding 0.2 mm: Not backed: Other: Cut to shape, of a thickness not exceeding 0.15 mm | Ultra-thin aluminum foil, cut to shape, thickness ≤ 0.15mm, not backed or backed with non-structural materials | ✅ Aluminum Foil (≤0.15mm) |
🔍 Crucial Reminder:
- "Insulation Tape" usually implies a self-adhesive product with a plastic film backing (for thermal resistance and strength). Therefore, HS 3919.90.50.60 is the most likely classification for commercial "aluminum foil insulation tape."
- HS 7607 is for Aluminum Foil as a raw material or semi-finished product. If your product is a "tape" with adhesive and plastic backing, do NOT use HS 7607 unless it is pure foil without plastic.
- Width Constraint: HS 3919.10.20.55 (from data) applies to rolls ≤ 20cm. HS 3919.90.50.60 is for "Other" widths or types. Check your roll width!
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Taxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: Post-November 2025 (Current Trade War Context)
🎯 1. 3919.90.50.60 —— Self-Adhesive Plastic Tapes (Including Foil-Backed Insulation Tape)
| Item | Content |
|---|---|
| Base Tariff | 5.8% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% (Trade War Penalty) |
| Total Tariff Rate | 30.8% |
| Tax Calculation | CIF Value × 30.8% |
| De Minimis Exemption | ❌ Not Eligible (Deny De Minimis) |
| Legal Basis Path | USITC:3919.90.50.60 → Section 301: Footnote 9903.88.01 |
📌 Explanation:
- Base Tariff 5.8%: Standard US import duty for "Other self-adhesive plastic tapes."
- Additional 25%: This is the Section 301 tariff applied to most Chinese-manufactured plastic articles.
- Total 30.8%: This is a high-cost item. Even if the product seems simple, the trade war penalties make it expensive to import.
- Warning: Do not misclassify as "Aluminum Foil" (7607) to avoid 25% tax. Customs will inspect the backing material. If it’s plastic-backed, they will reclassify and impose penalties.
🎯 2. 7607.19.30.00 —— Aluminum Foil (Backed, ≤0.2mm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Ad Valorem) |
| Section 301 Additional Tariff | +7.5% (Specific to Aluminum Products) |
| Total Tariff Rate | 7.5% |
| Tax Calculation | CIF Value × 7.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:7607.19.30.00 → Section 301: Aluminum Footnote |
📌 Explanation:
- Base Tariff 0%: Aluminum foil has a low base rate.
- Additional 7.5%: This is the Section 301 tariff for Aluminum.
- Total 7.5%: Significantly cheaper than the 30.8% for plastic tapes.
- Critical Condition: This ONLY applies if the product is pure aluminum foil (≤0.2mm) and NOT a self-adhesive tape with plastic backing. If you use this code for plastic-backed tape, you risk customs audits, fines, and retroactive tariffs.
🎯 3. 7607.20.50.00 —— Aluminum Foil (Cut to Shape, ≤0.15mm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Tariff | +7.5% |
| Total Tariff Rate | 7.5% |
| Tax Calculation | CIF Value × 7.5% |
📌 Note: Same as above. Only for ultra-thin, cut-to-shape aluminum foil, not standard adhesive tapes.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Document Checklist (Essential for Clearance)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Detail: Material composition (e.g., "PET film + Aluminum layer + Acrylic adhesive"), thickness, width, roll length. |
| ✅ Photos of Product & Cross-Section | ✔️ | Show the layers: Adhesive side, backing material (Plastic? Paper? Pure Foil?), and aluminum layer. |
| ✅ Commercial Invoice | ✔️ | Description must be precise: "Self-adhesive Aluminum Foil Tape, PET Backing" or "Pure Aluminum Foil, Thickness 0.1mm". |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Required for adhesives and chemical components. |
| ✅ Origin Certificate (CO) | ✔️ | To prove Chinese origin and apply Section 301 tariffs correctly. |
✅ 2. Classification Strategy (Key Mnemonic)
🔥 "Plastic Backing = 30.8%, Pure Foil = 7.5%. Don't Guess, Test First!"
| Scenario | Correct HS Code | Tariff | Risk if Misclassified |
|---|---|---|---|
| Foil Tape with Plastic (PET/PVC) Backing | 3919.90.50.60 |
30.8% | If you declare as 7607 → Penalty + Back Duties + Interest |
| Pure Aluminum Foil (≤0.2mm, Backed with Paper) | 7607.19.30.00 |
7.5% | If you declare as 3919 → Overpayment (But safer for clearance) |
| Foil Tape with Paper Backing (No Plastic) | 7607.19.30.00 |
7.5% | Verify no plastic film is present. |
| Foil Tape with Cloth Backing | 7607.19.30.00 |
7.5% | Ensure backing is not plastic. |
📌 Expert Tip:
- Most "Insulation Tapes" used in HVAC have a PET (Plastic) backing for durability. These MUST be classified under HS 3919.
- If you want the lower 7.5% tax, you must use non-plastic backing (e.g., paper or pure foil). This is rare for insulation tapes but possible for some sealing foils.
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Multi-layer Tape (Foil + Plastic + Adhesive) | Declare as Plastic Article (3919). Customs will prioritize the structural backing material. |
| Rolled Width > 20cm | Check HS 3919.90.50.60 vs. other 3919 codes. The provided data specifies "Other" for 3919.90.50.60, so confirm if it fits "Other" or needs a different subheading. |
| Printed Aluminum Foil | Still falls under 7607 if it's foil, not tape. If it's tape, it's 3919. Printing doesn't change the base classification. |
| Sample vs. Bulk | Ensure commercial invoices for samples still declare the correct HS code. Customs may not apply de minimis for samples from China due to trade restrictions. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3919.90.50.60 |
30.8% (Plastic-backed) | No special certs | High tax due to Section 301 |
| 🇺🇸 USA | 7607.19.30.00 |
7.5% (Pure Foil) | No special certs | Only if no plastic backing |
| 🇨🇳 China | 3919.90.50.60 |
5% - 10% (Export) | N/A | Low tax for export |
| 🇪🇺 EU | 3919.90.50.60 |
6.5% (Standard) | REACH, RoHS | No Section 301 |
| 🇦🇺 Australia | 3919.90.50.60 |
5% | RCM, GSR | Lower tax than US |
📌 Conclusion:
- The USA is the most expensive market for plastic-backed foil tapes due to Section 301 tariffs.
- If you can reformulate the product to use paper or pure foil backing, you save 23.3% in tariffs (7.5% vs 30.8%).
- EU and Australia are much more favorable, with no additional trade war penalties.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring "Plastic-backed Foil Tape" as "Aluminum Foil" (7607) to save tax
👉 Consequence: Customs audit, reclassification to 3919, 25.3% back-tariff penalty, and potential shipment seizure.
❌ Error 2: Ignoring the "Adhesive" component
👉 Consequence: If the product is self-adhesive, it cannot be classified as raw aluminum foil (7607) if it has a plastic backing. Adhesive is key to Chapter 39 classification.
❌ Error 3: Using "Tape" description but declaring as "Sheet" (3919.40)
👉 Consequence: Classification error. Self-adhesive tapes go to 3919.90 or 3919.10. Sheets go to 3919.40. Mismatch leads to delays.
❌ Error 4: Assuming "Insulation" changes the HS Code
👉 Consequence: Function (insulation) does not determine HS Code; Material Composition does. A plastic-backed insulating tape is still a plastic tape.
✅ Correct Practice:
"Self-Adhesive Aluminum Foil Insulation Tape, PET Backing, Width 50mm, Roll 50m, Model XYZ"
→ HS Code: 3919.90.50.60
→ Tariff: 30.8%
🎯 VII. Conclusion: Professional Declaration, Save Costs, Ensure Compliance!
🎯 Remember the Mnemonic:
🔹 "Plastic Backing = 30.8%, Pure Foil = 7.5%. Don't Risk It!"
🔹 "HS Code Determines Cost, Misclassification Costs More Than Tax!"
📌 Pro Tip:
If you are shipping to the USA, consider:
1. Product Reformulation: Switch to paper-backed or pure foil (no plastic) to utilize HS 7607 (7.5% tariff).
2. Third-Country Transshipment: Route through Vietnam or Mexico (if compliant with rules of origin) to avoid Section 301 tariffs.
3. Apply for Exclusions: Check if your specific product qualifies for any Section 301 exclusions (though rare for plastic tapes).
📣 Immediate Action:
📞 Contact a licensed customs broker
📤 Submit product samples for pre-classification
📋 Request an Advance Ruling from US CBP if the product is high-value
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Dollar Saved in Tariffs is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.