锅盖支架
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326190080 | 87.9% | CN | US | Official Doc |
| 9403608093 | 35.0% | CN | US | Official Doc |
| 7323930080 | 62.0% | CN | US | Official Doc |
| 9403200050 | 85.0% | CN | US | Official Doc |
AI Analysis
🍳 Pot Rack Stands & Support Brackets (锅盖支架)
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: What Exactly is a "Pot Rack Stand"?
A "Pot Rack Stand" (锅盖支架) is a versatile household or industrial accessory designed to hold pot lids, pans, or cookware. In international trade, its classification is highly sensitive to material composition and functional definition. It is not a single HS Code product but a category that splits sharply between Metal Hardware, Wooden Furniture Parts, and Kitchen Utensils.
⚠️ Critical Distinction Point:
- If made of Steel/Iron and used as general hardware → 7326.19.00.80
- If made of Wood and used as furniture component → 9403.60.80.93
- If made of Stainless Steel and defined as a kitchen utensil part → 7323.93.00.80
- If made of Metal but structured as furniture/support → 9403.20.00.50
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the four primary classification paths for "Pot Rack Stands":
| HS Code | Product Description | Application Scenario | Material Basis |
|---|---|---|---|
7326.19.00.80 |
Other articles of iron or steel | General hardware, decorative metal brackets, non-specific steel fittings | ✅ Iron/Steel |
9403.60.80.93 |
Other wooden furniture | Wooden pot racks, wooden support stands for kitchen islands | ✅ Wood |
7323.93.00.80 |
Kitchen utensils and parts (Stainless Steel) | Stainless steel lid holders, specialized kitchenware parts | ✅ Stainless Steel |
9403.20.00.50 |
Other metal furniture | Metal frames, large structural supports, display racks made of metal | ✅ Metal (General) |
🔍 Key Reminder:
- 7326.19.00.80 is the most common "catch-all" for generic steel hardware.
- 9403.20.00.50 applies if the stand is large, sturdy, and considered "furniture" (e.g., a floor-standing metal rack for heavy pots).
- 7323.93.00.80 is specific to kitchen use and stainless steel. If it’s carbon steel, it may fall under 7326.
- 9403.60.80.93 is strictly for wooden components.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: 2025–2026 (Subject to Section 232 and Section 301 tariffs)
🎯 1. 7326.19.00.80 —— Other Articles of Iron or Steel (Most Common)
| Item | Content |
|---|---|
| Base Tariff | 2.9% (Ad Valorem) |
| Section 301 Surcharge | +25.0% (Trade Act Section 301) |
| Section 232 Surcharge (Steel/Aluminum/Copper) | +50.0% (Presidential Proclamation 9705) |
| Total Effective Tax Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ Not Eligible (Denied for Chinese-origin steel products under Section 232/301) |
| Legal Basis Path | Section 301: 9903.01.25 → Section 232: 9903.01.24 → USITC: 7326.19.00.80 |
📌 Explanation:
- The 50% Section 232 tariff is applied because the product is classified as an article of steel.
- The 25% Section 301 tariff is added for Chinese origin.
- Total 87.9% is a CRITICAL RED FLAG. This is among the highest tariff rates for consumer goods.
🎯 2. 9403.60.80.93 —— Other Wooden Furniture
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | +25.0% |
| Section 232 Surcharge | 0.0% (Not applicable to wood) |
| Total Effective Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Eligible (Section 301 applies to most Chinese wood products) |
| Legal Basis Path | Section 301: 9903.01.25 → USITC: 9403.60.80.93 |
📌 Note:
- This is the lowest cost option if the product can be legitimately classified as wooden furniture.
- However, customs may reclassify it as steel (7326) if it has metal joints, leading to a huge tax jump (from 35% to 87.9%).
🎯 3. 7323.93.00.80 —— Kitchen Utensils (Stainless Steel Parts)
| Item | Content |
|---|---|
| Base Tariff | 2.0% |
| Section 301 Surcharge | 0.0% (Some kitchen utensils are exempt or have lower rates, but data shows 0%) |
| Section 232 Surcharge (Steel) | +50.0% |
| Total Effective Tax Rate | 62.0% |
| Tax Calculation | CIF Value × 62.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Section 232: 9903.01.24 → USITC: 7323.93.00.80 |
📌 Note:
- The 50% Section 232 tariff still applies because it is a steel product.
- The base rate is lower (2.0%) and no Section 301 is listed in the data, but the 50% steel tariff remains a heavy burden.
🎯 4. 9403.20.00.50 —— Other Metal Furniture
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | +25.0% |
| Section 232 Surcharge (Steel) | +50.0% |
| Total Effective Tax Rate | 85.0% |
| Tax Calculation | CIF Value × 85.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | Section 301: 9903.01.25 → Section 232: 9903.01.24 → USITC: 9403.20.00.50 |
📌 Note:
- Classified as furniture, so base tariff is 0%.
- But since it is metal, it incurs the 50% Section 232 tariff.
- Also incurs 25% Section 301.
- Total 85.0% is nearly as high as the steel hardware rate (87.9%).
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Preparation Checklist (Non-negotiable)
| Document | Required | Description |
|---|---|---|
| ✅ Product Specifications | ✔️ | Material type (Steel grade, Wood type), dimensions, weight |
| ✅ Material Certificate | ✔️ | Crucial for distinguishing between Steel (7326/7323) and Wood (9403) |
| ✅ Product Photos | ✔️ | Show joints, finishes, and any metal-to-wood connections |
| ✅ Bill of Lading | ✔️ | Clear description: "Stainless Steel Pot Rack" vs. "Wooden Kitchen Stand" |
| ✅ Commercial Invoice | ✔️ | Accurate HS Code and declared value |
| ✅ Origin Certificate | ✔️ | Proof of Chinese origin (triggers 301/232 tariffs) |
✅ 2. Declaration Strategy (Key Mantras)
🔥 "Material Determines Tax, Structure Defines Function!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Steel Bracket | 7326.19.00.80 |
Misdeclare as "Plastic" or "Wood" → Fraud/Risk |
| Wooden Stand | 9403.60.80.93 |
Misdeclare as "Metal Furniture" → 85% Tax instead of 35% |
| Stainless Steel Holder | 7323.93.00.80 |
Misdeclare as "General Steel" → Same 62% but higher audit risk |
| Large Metal Rack | 9403.20.00.50 |
Misdeclare as "Hardware" → 87.9% vs 85% (Minor difference, but consistency matters) |
✅ 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| Mixed Material (Wood + Steel) | High Risk! Customs will likely classify based on the principal material or essential character. If steel dominates, expect 87.9%. If wood dominates, argue for 35%. |
| OEM Custom Designs | Provide design drawings to prove if it’s "furniture" (large, sturdy) or "hardware" (small, accessory). |
| Section 232 Exemption Requests | Check if your steel alloy qualifies for any exclusions. This is rare and requires legal support. |
| De Minimis (Section 321) | ❌ Do Not Use. Section 232 tariffs explicitly deny de minimis entry for steel products. Small packages will still be taxed. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Notes |
|---|---|---|---|
| 🇺🇸 USA | 7326.19.00.80 |
87.9% | Section 232 + 301. Extremely High. |
| 🇨🇳 China | 7326.19.00.80 |
~10-15% | No Section 232/301. Lower cost for import. |
| 🇪🇺 EU | 7326.19.00.80 |
~6.5% | No Section 232. No 301. Moderate tariff. |
| 🇬🇧 UK | 7326.19.00.80 |
~6.5% | Post-Brexit, similar to EU. |
| 🇦🇺 Australia | 7326.19.00.80 |
~5% | Low tariff, no trade war surcharges. |
📌 Conclusion:
- USA is the most expensive market due to Section 232 (Steel) and Section 301 (China) tariffs.
- Consider Supply Chain Shift: If exporting to the US, consider sourcing from Vietnam, India, or Mexico to avoid Section 301.
- Material Substitution: Using Wood or Plastic instead of Steel can reduce tariffs from 87.9% to 35% or less.
📌 VI. Common Mistakes & Pitfalls (Lessons Learned)
❌ Mistake 1: Declaring steel pot racks as "Plastic" to avoid steel tariffs
👉 Consequence: Customs inspection reveals steel → Seizure, fines, and blacklisting.
❌ Mistake 2: Ignoring Section 232 for steel products
👉 Consequence: Missing the 50% surcharge leads to massive back-taxes and penalties at customs.
❌ Mistake 3: Using De Minimis for small steel parts
👉 Consequence: Section 232 explicitly excludes de minimis for steel → Package held, tax demanded.
❌ Mistake 4: Misclassifying wooden stands as metal furniture
👉 Consequence: Unnecessary 85% tariff instead of 35%.
✅ Correct Approach:
"Wooden Pot Rack Stand, Natural Finish, No Metal Hardware" → 9403.60.80.93
"Stainless Steel Lid Holder, Kitchen Accessory" → 7323.93.00.80
🎯 VII. Conclusion: Precision Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Steel = 50% Section 232 + 25% Section 301 = 87.9%!"
🔹 "Wood = 0% Base + 25% Section 301 = 35%!"
🔹 "Change Material, Change Tariff!"
📌 Pro Tip:
If you are exporting to the US:
1. Switch to Wood or Plastic if possible.
2. Shift Supply Chain to non-China countries.
3. Apply for Advance Rulings to confirm HS Code before shipment.
📣 Act Now:
📞 Consult a customs broker + Provide material specs + Optimize for Tax Efficiency
🚀 Let your Pot Rack Stands clear smoothly, legally, and profitably!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tariff Saved is Profit Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.