非发泡橡胶工业型材
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4016996050 | 37.5% | CN | US | Official Doc |
| 4016935020 | 37.5% | CN | US | Official Doc |
| 4016990300 | 38.0% | CN | US | Official Doc |
| 4016996050 | 37.5% | CN | US | Official Doc |
| 4016996050 | 37.5% | CN | US | Official Doc |
AI Analysis
🛡️ Non-Foamed Rubber Industrial Profiles (Non-Foamed Rubber Industrial Extrusions/Profiles)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Truly Understand "Non-Foamed Rubber Industrial Profiles"?
Non-Foamed Rubber Industrial Profiles refer to rubber products that have undergone vulcanization, possess a solid (non-porous) structure, and are shaped into specific industrial profiles (such as strips, seals, gaskets, or intermediate semi-finished goods). Unlike foamed rubber, these materials are dense, offering high compression resistance, durability, and sealing capabilities.
In international trade, they are primarily classified under Chapter 40 (Rubber and Articles Thereof), specifically within Heading 4016 ("Other articles of vulcanized rubber other than hard rubber"). The exact HS code depends on the specific morphology (sheet vs. profile) and material composition.
⚠️ Key Distinction Point:
- If it is a solid, non-expanded rubber strip/profile → It falls under 4016.99.60.50 or 4016.93.50.20.
- If it is a solid rubber sheet/plate used as an industrial intermediate → It falls under 4016.99.03.00.
- Crucial Note: These items are NOT foamed (sponge) rubber. If foamed, they would fall under 4016.93.10 or similar, which may have different duty structures. Ensure your technical data sheet explicitly states "Non-Foamed" or "Solid Rubber."
📦 II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data, here are the three specific HS Codes applicable to non-foamed rubber industrial profiles and sheets. All entries are subject to US Import Regulations.
| HS Code | Product Description | Application Scenario | Material/Form |
|---|---|---|---|
4016.99.60.50 |
Non-foamed rubber industrial profiles; matches material and form; classified as other vulcanized rubber products | Industrial seals, custom extruded profiles, non-standard rubber components | ✅ Solid Vulcanized Rubber / Profile |
4016.93.50.20 |
Non-foamed rubber industrial profiles; material meets vulcanized rubber standards; form is other category products | General industrial rubber strips, gaskets without specific function conflict | ✅ Solid Vulcanized Rubber / Profile |
4016.99.03.00 |
Industrial-grade non-foamed rubber sheets; material is rubber; form is sheet; classified as other products | Rubber gaskets, flat seals, intermediate semi-finished rubber sheets | ✅ Solid Vulcanized Rubber / Sheet |
🔍 Critical Reminder:
-4016.99.60.50and4016.93.50.20are typically used for profiled/extruded items (linear shapes).
-4016.99.03.00is strictly for sheet/plate forms.
- Misclassifying a profile as a sheet (or vice versa) may lead to customs scrutiny, although the tax rate in this specific dataset is identical. However, accurate classification ensures compliance with USITC notes.
💰 III. 2026 Latest Tariff Rate Details (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 4016.99.60.50 —— Non-foamed Rubber Industrial Profiles (Other)
| Item | Content |
|---|---|
| Base Duty Rate | 2.5% (Basic Tariff) |
| Section 301 Surtax | +25.0% (USITC Footnote 9903.88.01 - Section 301 Tariff) |
| IEEPA Surtax | +10% (Against China/HK products, effective from Nov 10, 2025) |
| Total Tax Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Authority Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:4016.99.60.50 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- The 2.5% is the standard Most Favored Nation (MFN) duty for other vulcanized rubber articles.
- The 25% is the punitive tariff under Section 301 for Chinese rubber products.
- The 10% is the new IEEPA (International Emergency Economic Powers Act) surcharge for Chinese goods.
- Total 37.5% is a high-cost barrier. Profit margins must account for this fully.
🎯 2. 4016.93.50.20 —— Non-foamed Rubber Industrial Profiles (Other Specifics)
| Item | Content |
|---|---|
| Base Duty Rate | 2.5% |
| Section 301 Surtax | +25.0% |
| IEEPA Surtax | +10% |
| Total Tax Rate | 37.5% |
| Tax Calculation | CIF × 37.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Authority Path | IEEPA:9901.25 → IEEPA:9903.01.24 → USITC:4016.93.50.20 → FOOTNOTE:9903.88.01 |
📌 Note:
- Identical tax structure to4016.99.60.50.
- This code is often used when the profile does not conflict with specific functional exclusions but remains a general "other" rubber article.
🎯 3. 4016.99.03.00 —— Industrial Non-Foamed Rubber Sheets (Intermediate Goods)
| Item | Content |
|---|---|
| Base Duty Rate | 3.0% |
| Section 301 Surtax | +25.0% |
| IEEPA Surtax | +10% |
| Total Tax Rate | 38.0% |
| Tax Calculation | CIF × 38.0% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Authority Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:4016.99.03.00 → FOOTNOTE:9903.88.01 |
📌 Attention:
- This code carries a 3.0% base rate (1% higher than profiles), resulting in a 38.0% total rate.
- This applies specifically to sheets used as industrial intermediates.
- If you ship profiles but declare them as sheets, customs may flag for misclassification, even if the tax is similar. Accuracy is paramount.
🛠️ IV. Customs Clearance Practical Advice (Combat Pitfall Guide)
✅ 1. Required Document Checklist (None Can Be Missing)
| Document | Mandatory? | Explanation |
|---|---|---|
| ✅ Technical Data Sheet | ✔️ | Must explicitly state "Non-Foamed" (Solid), Vulcanization type, Shore A hardness, and Density. |
| ✅ Product Photos | ✔️ | Clear images showing the cross-section (solid, no bubbles/pores) and end-use context. |
| ✅ Commercial Invoice | ✔️ | Description must be precise: e.g., "Non-Foamed Vulcanized Rubber Profile, Model XYZ." Avoid vague terms like "Rubber Part." |
| ✅ Packing List | ✔️ | Detail weights and dimensions. Ensure no mixed declarations (e.g., don't mix sheets and profiles in one line item if possible). |
| ✅ Certificate of Origin (CO) | ✔️ | If originating from China, this confirms the origin for surtax calculation. |
| ✅ Declaration of Non-Foamed Status | ✔️ | A signed statement confirming the product is not expanded/foamed rubber, to avoid classification under 4016.93.10 (if applicable elsewhere). |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Solid Not Foamed, Profile vs Sheet, Name Precise, Tax Avoided!"
| Scenario | Correct Declaration Method | Wrong Practice |
|---|---|---|
| Rubber Strip/Profile | 4016.99.60.50 or 4016.93.50.20 |
Misreporting as "Sheet" → Potential penalty + 38% rate |
| Rubber Sheet/Plate | 4016.99.03.00 |
Misreporting as "Profile" → Potential penalty |
| Foamed Rubber | Do NOT use these codes | Using non-foamed codes for foamed goods → Fraud/Seizure risk |
| Mixed Shapes in One Shipment | Split lines: Profiles under 4016.99.60.50, Sheets under 4016.99.03.00 | Combined declaration → Customs will force split, causing delays |
✅ 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| Custom Extrusions | Provide detailed cross-section drawings. Customs officers often inspect for "foam" content. A solid cross-section photo is key. |
| Intermediate Semi-Finished Goods | If the profile is a raw material for further manufacturing, ensure the invoice reflects "Industrial Raw Material" rather than "Finished Product" to aid in audit trails, though tax remains 37.5%. |
| Origin Routing | If re-exported or processed in Vietnam/Malaysia, ensure substantial transformation occurs to change the country of origin and avoid the 37.5% Chinese surtax. |
| Sample Imports | Even samples are subject to de minimis restrictions. No duty-free entry for small values if originating from China under IEEPA. |
🌍 V. Global Major Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (Base + Surtax) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4016.99.60.50 / 4016.99.03.00 |
37.5% - 38.0% (CN Origin) | No specific FDA/UL needed for general industrial use | High Barrier. IEEPA 10% is new and strict. |
| 🇨🇳 China | 4016.99.60.50 |
~3.0% - 5.0% | RoHS (if electronic component) | Low duty. Used as raw material. |
| 🇪🇺 EU | 4016.99.99 |
0% - 3.75% | REACH, RoHS (if applicable) | No Section 301/IEEPA style tariffs. |
| 🇬🇧 UK | 4016.99.99 |
0% - 3.75% | UKCA, REACH | Post-Brexit alignment with EU tariffs. |
| 🇦🇺 Australia | 4016.99.90 |
5.0% | G-Mark (if electrical) | Free Trade Agreement (ChAFTA) may apply if from China? Check latest FTAs. |
📌 Conclusion:
- The US market is extremely costly for non-foamed rubber imports from China due to the combination of Base Duty + 301 Tariff + IEEPA Surtax.
- European and Asian markets are significantly more competitive for these products.
- Consider supply chain diversification (e.g., manufacturing in ASEAN countries) to mitigate the 35%+ tax burden in the US.
📌 VI. Common Errors & Pitfall Guide (Blood & Tears Lessons)
❌ Error 1: Declaring "Rubber Profile" without specifying "Non-Foamed."
👉 Consequence: Customs may suspect foam content or misclassify, leading to delays or requests for lab tests to determine density.
✅ Fix: Explicitly write "Non-Foamed, Solid Vulcanized Rubber Profile" in the description.
❌ Error 2: Confusing "Profile" (4016.99.60.50) with "Sheet" (4016.99.03.00).
👉 Consequence: While tax is similar (37.5% vs 38.0%), misclassification is a compliance violation. If audited, you face penalties for inaccurate reporting.
✅ Fix: Accurately describe the geometry. Linear/Strip = Profile. Flat/Broad = Sheet.
❌ Error 3: Assuming De Minimis ($800) applies.
👉 Consequence: Under IEEPA (10% surtax), the de minimis exemption is denied for Chinese goods. Even a $100 sample attracts duty.
✅ Fix: Budget for duties on ALL shipments, regardless of value.
❌ Error 4: Ignoring the "122 Clause" or IEEPA updates.
👉 Consequence: Failing to include the 10% IEEPA surtax in cost calculations leads to unexpected financial loss at clearance.
✅ Fix: Update cost models immediately to include Total 37.5%-38.0%.
🎯 VII. Conclusion: Professional Declaration, Time-Saving, Cost-Effective!
🎯 Remember the Mantra:
🔹 "Solid Not Foamed, Profile vs Sheet, Tax 37.5, De Minimis Denied!"
🔹 "HS Code Determines Fate, 35% Difference, Wrong Declaration Costs Thousands!"
📌 Tips:
- If your rubber profiles are originating from Vietnam, Thailand, or Malaysia, you may apply for IEEPA Exemption or lower tariffs due to FTAs.
- It is highly recommended to apply for an Advance Ruling (Binding Ruling) with US Customs and Border Protection (CBP) before bulk shipments to confirm the exact HS code and duty rate.
- For high-volume imports, consider Bonded Warehouses or Foreign Trade Zones (FTZs) to defer duty payments until the goods are sold or entered into US commerce.
📣 Immediate Action:
📞 Contact a professional customs broker + Provide Cross-Section Photos + Apply for HS Code Advance Ruling
🚀 Let your rubber profiles clear smoothly, export efficiently, and maximize profits!
✨ Professional clearance starts with precise classification!
💼 Every cent of your cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.