黄麻或其他纺织韧皮纤维垫
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6307909891 | 24.5% | CN | US | Official Doc |
| 5303100000 | 35.0% | CN | US | Official Doc |
| 5303900000 | 35.0% | CN | US | Official Doc |
| 3921901910 | 40.3% | CN | US | Official Doc |
Product Images
AI Analysis
🧶 Jute & Other Textile Bast Fiber Mats/Pads: HS Code Classification & 2026 Tariff Breakdown
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Jute Mats"?
Jute and other textile bast fiber mats/pads are versatile products derived from natural plant fibers. In international trade, their classification hinges on the degree of processing and final form. They are generally divided into two categories:
- Raw/Intermediate Fibers (Raw Material Stage): Unprocessed or partially processed fibers (e.g., hemp, jute stems, bast fibers) intended for further manufacturing. These are classified under Chapter 53.
- Finished Textile Articles (Final Product Stage): Woven, non-woven, or assembled mats, floor coverings, or pads made from these fibers. These are classified under Chapter 63.
⚠️ Key Distinction Point:
- If the product is loose fiber, tow, or yarn (even if compressed for shipping) →归类 to Chapter 53 (Higher Tax Liability).
- If the product is a finished mat, pad, or floor covering with defined shape and use →归类 to Chapter 63 (Lower Tax Liability).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Processing Stage |
|---|---|---|---|
5303.10.00.00 |
Jute and other textile bast fibers, in raw or processed state, but not spun; tow and waste | Raw jute stalks, decorticated bast fibers, fiber bundles for textile industry | ❌ Raw/Intermediate |
5303.90.00.00 |
Jute and other textile bast fibers; yarn and woven fabric thereof (other than those of heading 5301-5302) | Processed bast fibers, non-jute textile fibers (e.g., flax, hemp derivatives) for industrial use | ❌ Raw/Intermediate |
3921.90.19.10 |
Other plates, sheets, film, foil and strip, of plastics: Other | Plant fiber mats where the plastic component exceeds the fiber weight by mass (composite material) | ⚠️ Composite (Plastic Dominant) |
6307.90.98.91 |
Other made up textile articles; other | Finished jute mats, doormats, floor pads, or textile pads made from jute/bast fibers | ✅ Finished Product |
🔍 Key Reminder:
- Finished Mats/Pads: Must be classified under 6307.90.98.91. This is the most common and favorable classification for commercial jute mats.
- Raw Fibers: If you import raw jute for your own factory to weave into mats, it falls under 5303. Do not misdeclare raw fibers as "mats" to avoid customs penalties.
- Composite Materials: If the mat has a plastic backing that weighs more than the textile layer, it may fall under 3921.90.19.10. Check material composition carefully!
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtax, Policy Surcharges)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: 2025 November 10 onwards (including subsequent imports)
🎯 1. 6307.90.98.91 —— Finished Jute/Bast Fiber Mats & Pads
| Item | Content |
|---|---|
| Base Duty Rate | 7.0% (Ad Valorem) |
| USITC Surtax (Section 301) | +7.5% |
| IEEPA Surtax (Section 122) | +10% (Specific to China/Origin Rules) |
| Total Duty Rate | 24.5% |
| Tax Calculation | CIF Value × 24.5% |
| De Minimis Exemption | ❌ Not Applicable (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:6307.90.98.91 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- This is the lowest tax category for jute products, but still carries significant surcharges.
- "24.5%" includes base tariff + Section 301 + IEEPA penalties.
- Crucial: Ensure the product is described as a "Finished Mat" or "Floor Pad," not "Fibers."
🎯 2. 5303.10.00.00 —— Jute & Other Textile Bast Fibers (Raw/Intermediate)
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% (Ad Valorem) |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122) | +10% |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Applicable (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.24 → USITC:5303.10.00.00 → FOOTNOTE:9903.88.01 |
📌 Warning:
- Despite a 0% base rate, the Section 301 surcharge is much higher (25%) compared to finished goods (7.5%).
- Total Tax: 35% vs. 24.5% for finished goods.
- Misclassifying raw fibers as finished mats is a customs violation. Do not attempt this.
🎯 3. 5303.90.00.00 —— Other Textile Bast Fibers & Derivatives
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122) | +10% |
| Total Duty Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Applicable (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.24 → USITC:5303.90.00.00 → FOOTNOTE:9903.88.01 |
📌 Note:
- Applies to non-jute bast fibers (e.g., flax, hemp, kenaf) in raw/intermediate forms.
- Same high tax liability as jute fibers (35%).
🎯 4. 3921.90.19.10 —— Composite Mats (Plastic Weight > Fiber Weight)
| Item | Content |
|---|---|
| Base Duty Rate | 5.3% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surtax (Section 122) | +10% |
| Total Duty Rate | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis Exemption | ❌ Not Applicable (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → USITC:3921.90.19.10 → FOOTNOTE:9903.88.01 |
📌 Caution:
- This applies only if the plastic component weighs more than the textile component.
- Highest Tax Rate: 40.3%. Avoid this classification if possible by optimizing material composition or ensuring fiber dominance.
🛠️ IV. Customs Clearance Practical Advice (Combat Pitfall Guide)
✅ 1. Required Documentation Checklist (Non-Negotiable)
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Material composition (Fiber %, Plastic %), dimensions, weight |
| ✅ Product Photos | ✔️ | Clear images of the mat/pad, showing texture, backing, and edges |
| ✅ Commercial Invoice | ✔️ | Must specify "Jute Mat" or "Bast Fiber Pad," not just "Textile Material" |
| ✅ Packing List | ✔️ | Detail net/gross weight, number of pieces |
| ✅ Material Composition Proof | ✔️ | Lab report or manufacturer certificate confirming fiber/plastic ratio |
| ✅ Certificate of Origin | ✔️ | To verify origin for IEEPA/Section 301 applicability |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 “Finished Mats, Low Tax; Raw Fibers, High Tax; Plastic Heavy, Worst Tax!”
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Finished Jute Doormat | 6307.90.98.91 (24.5%) |
Misclassified as raw fiber → 35% |
| Raw Jute Stalks/Bast | 5303.10.00.00 (35.0%) |
Misclassified as finished mat → Risk of penalty + back tax |
| Jute Mat with Plastic Backing (Plastic > Fiber) | 3921.90.19.10 (40.3%) |
Misclassified as textile → 24.5% (but will be audited and corrected) |
| Jute Mat with Plastic Backing (Fiber > Plastic) | 6307.90.98.91 (24.5%) |
Misclassified as plastic article → 40.3% |
✅ 3. Special Cases Handling
| Scenario | Handling Advice |
|---|---|
| OEM Custom Mats | Provide client design specs + material certificate. Avoid vague descriptions like "Textile Product." |
| Mixed Material Mats | Declare the dominant material. If fiber weight > plastic weight, use 6307. If plastic > fiber, use 3921. |
| Samples for Evaluation | Still subject to full duties if not under de minimis (which is denied for CN origin). Label as "Sample - Not for Resale." |
| Recycled Jute Mats | Same classification applies. Ensure "Recycled" is stated if it affects material composition proof. |
🌍 V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Duty Rate | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 6307.90.98.91 |
24.5% | No specific | Highest surcharges for CN origin |
| 🇨🇳 China | 6307.90.98.91 |
~5-8% | CCC (if applicable) | No Section 301/IEEPA |
| 🇪🇺 EU | 6307.90.98.91 |
0-5% | CE (if applicable) | Low base duty, no extra surcharges |
| 🇬🇧 UK | 6307.90.98.91 |
0-5% | UKCA | Post-Brexit alignment with EU |
| 🇦🇺 Australia | 6307.90.98.91 |
5% | RCM | No additional surcharges |
📌 Conclusion:
- USA is the most costly market due to Section 301 and IEEPA surcharges.
- EU/UK/Australia offer significantly lower duty burdens. Consider supply chain diversification if targeting US market.
- Always prioritize "Finished Article" classification to minimize tax liability.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Declaring raw jute fibers as "Jute Mats" to save tax
👉 Consequence: Customs audit → Back tax (35% - 24.5%) + Penalties + Delay
❌ Error 2: Declaring a plastic-heavy mat as "Textile"
👉 Consequence: Customs reclassification → Tax increase from 24.5% to 40.3% + Compliance flags
❌ Error 3: Vague description "Textile Product" on Invoice
👉 Consequence: Customs request for additional info → Clearance delay (7-14 days)
❌ Error 4: Ignoring material composition (Fiber vs. Plastic ratio)
👉 Consequence: Misclassification under Chapter 39 vs. 63 → Wrong Tax Rate
✅ Correct Practice:
"Jute Floor Mat, 2x3 ft, Natural Fiber, Non-Woven, No Plastic Backing, Model XYZ, Made in China"
🎯 VII. Conclusion: Professional Declaration, Save Time, Cut Costs!
🎯 Remember the Mnemonic:
🔹 “Finished Mats, 24.5%; Raw Fibers, 35%; Plastic Heavy, 40.3%!”
🔹 “HS Code Determines Life or Death, Tax Difference 10-15%, Wrong Declaration, Huge Penalty!”
📌 Pro Tip:
If your jute mats are originating from Vietnam, Mexico, Thailand, or Malaysia, you may qualify for IEEPA Exemption, reducing the tax rate to 0%~5%.
Recommend applying for Advance Ruling before shipment to avoid clearance risks.
📣 Take Action Now:
📞 Contact a Professional Customs Broker + Provide Product Photos + Apply for HS Code Advance Ruling
🚀 Let your Jute Mats Clear Customs Smoothly, Boost Profits, and Expand Globally!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Penny of Cost Deserves Precision Calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.