Nails
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7317005507 | 85.0% | CN | US | Official Doc |
| 7317005505 | 85.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Nails, Tacks, & Staples (Iron/Steel Articles)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π 1. Product Definition & Classification: Do You Know What "Nails" Really Are?
In international trade, the term "Nails" is not just a single item but a category defined by material, construction, and packaging. The specific classification depends heavily on material composition, construction method, and packaging type (collated/plastic strip).
Based on the provided data, these items fall under Heading 7317: "Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel..."
β οΈ Key Distinction Points:
- Material: Must be Iron or Steel. (Articles with copper heads are excluded from this heading if the head defines the article, but here we focus on steel nails).
- Construction: One-piece construction made of round wire.
- Packaging: Specifically Collated Nails (assembled in a plastic strip) vs. Bulk/Loose.
- Treatment: Galvanized vs. Unspecified/Other (plain/uncoated).
π¦ 2. HS Code Classification Details (2026 Latest Tariff Authority Match)
The provided data identifies two specific sub-categories for Collated Nails Assembled in a Plastic Strip. Both share the same tariff structure but differ in surface treatment.
| HS Code | Product Description | Key Attributes | Tax Total |
|---|---|---|---|
| 7317.00.55.07 | Collated Nails: Assembled in a plastic strip: Other | - One-piece construction - Made of round wire - Non-Galvanized / General "Other" finish - Plastic strip assembly |
75.0% |
| 7317.00.55.05 | Collated Nails: Assembled in a plastic strip: Galvanized | - One-piece construction - Made of round wire - Galvanized (Zinc-coated for rust protection) - Plastic strip assembly |
75.0% |
π Critical Analysis:
- Why these codes? Both entries are strictly for Collated Nails (nails linked together for nail guns/tools). If nails are loose/bulk, these specific HS codes would not apply.
- Galvanized vs. Other: The only difference between.05and.07is the galvanization. However, both incur the exact same total tax rate in this dataset.
- Exclusions: If the nails have copper heads that define the character of the article, they may be excluded from Heading 7317 entirely (refer to heading 8305). Ensure the heads are not copper-dominant if using these codes.
π° 3. 2026 Latest Tariff Rate Breakdown (With Supplementary Taxes)
β Applicable Country: United States (US)
β Origin: China (CN) (Implied by the "25% Additional Tariff" context typical of US-China trade data)
β Effective Date: Current/2026 Regime
π― 1. 7317.00.55.07 & 7317.00.55.05 β Steel Nails (Collated)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% (Ad Valorem) |
| Section 301 Additional Tariff | +25.0% (Specifically noted for Steel/Aluminum/Copper products in some contexts, or general Section 301) |
| IEEPA/Other Supplementary Tariff | +50.0% (Noted as "Steel, Aluminum, Copper Products Additional Tariff: 50%" in source) |
| Total Tariff Rate | 75.0% |
| Tax Calculation | CIF Value Γ 75% |
| De Minimis Exemption | β Not Applicable (High tax rates usually negate Section 321/De Minimis benefits for commercial shipments; check specific carrier rules) |
| Legal Basis Path | HTSUS:7317.00.55.05/07 β Section 301 Footnotes β Supplementary Tariff Notes |
π Explanation:
- The 0% base rate is misleadingly low. The actual cost is driven by supplementary tariffs.
- The source data explicitly states: "Base Tariff: 0.0%, Additional Tariff: 25.0% Steel, Aluminum, Copper Products Additional Tariff: 50%".
- Total: 75%. This is an extremely high tariff for a low-value commodity.
- Warning: This 75% rate applies to Iron/Steel nails. If you misclassify them as "Other Metal" or miss the "Steel" component, you risk severe penalties.
π οΈ 4. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Essential Documentation Checklist (Non-Negotiable)
| Document | Required | Explanation |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state "Nails, Iron/Steel, Collated, Plastic Strip". Avoid vague terms like "Hardware." |
| β Product Description | βοΈ | Specify: One-piece construction, Round wire, Galvanized (if applicable .05) or Other (.07). |
| β Material Certification | βοΈ | Proof of Iron/Steel composition. If there are non-metal heads, declare them but ensure they don't change the heading. |
| β Packaging Photos | βοΈ | Show the plastic strip/collation. This is crucial to distinguish from loose nails (which have different HS codes). |
| β Tariff Liability Statement | βοΈ | Acknowledge the 75% total duty. Pre-calculate costs to ensure margins survive. |
β 2. Declaration Tips (Key Mantra)
π₯ βCollated = Plastic Strip! Steel = 75%! Donβt Mix!β
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| Nails on a plastic strip | 7317.00.55.05 (Galvanized) or .07 (Other) |
Declaring as "Loose Nails" β Wrong HS, Penalty |
| Nails with Copper Heads | Check Heading 8305 | Declaring as 7317 β Misclassification |
| Non-Steel Nails (e.g., Aluminum) | Check Chapter 76 | Declaring as 7317 (Iron/Steel) β Rejection |
| Bulk/Loose Nails | Different HS Code (Not in provided data) | Using Collated HS Code β Audit Risk |
β 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| Mixed Packs (Some galvanized, some not) | Split the shipment or declare the majority. Better yet, keep batches separate to assign .05 vs .07 correctly. |
| Customs Inspection | Be ready to show the cross-section of the nail to prove "One-piece construction." If itβs welded or multi-part, it might fall under a different sub-heading. |
| Cost Optimization | With a 75% tariff, margins are slim. Consider if Section 301 Exclusions apply (if any are still valid for this year) or if re-routing through a third country (though transshipment rules are strict). |
π 5. Global Market Comparison (2026 Outlook)
| Country/Region | Recommended HS Code | Estimated Tariff | Note |
|---|---|---|---|
| πΊπΈ USA | 7317.00.55.05/.07 |
75.0% | High burden. Due to Steel/Aluminum/Copper supplementary tariffs. |
| π¨π³ China | 7317.00.55.05/.07 |
Varies (Export Side) | Check China's export rebate policies for steel products. |
| πͺπΊ EU | 7317.19 (General) |
~2.7% | No 75% tax! EU does not have Section 301 equivalent. Significant cost saving opportunity if sourcing from EU. |
| π¬π§ UK | 7317.19 |
~2.7% | Post-Brexit, tariffs may differ, but generally lower than US steel penalties. |
π Conclusion:
- USA is the most expensive market for steel nails due to Section 301 + Supplementary Tariffs (75% total).
- EU/UK offer significantly lower duties (~2-3%), making them more competitive for non-US destinations.
π 6. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring "Collated Nails" as "Loose Nails"
π Result: Wrong HS Code. Loose nails might have different tariffs (though likely still high), but more importantly, it triggers customs audits for misdeclaration.
β Mistake 2: Ignoring the "Plastic Strip" aspect
π Result: If you donβt specify "Assembled in a plastic strip," customs may classify them under a different, potentially higher, or more restricted sub-heading.
β Mistake 3: Underestimating the 75% Total Tax
π Result: Profit margin erosion. Many exporters only look at the 0% base rate and fail to budget for the 25% + 50% supplements.
β Mistake 4: Confusing "Galvanized" with "Other"
π Result: While the tax is the same in this dataset, .05 and .07 are distinct. Mislabeling can lead to documentation discrepancies during inspection.
β Correct Practice:
"Steel Nails, Collated, Plastic Strip, Galvanized, One-Piece, Round Wire, Model XYZ, HTS 7317.00.55.05"
π― 7. Conclusion: Precision is Profit
π― Remember the Mantra:
πΉ "Collated + Plastic Strip = 75% Tax (USA)!"
πΉ "Base 0% is a Trap! Watch the 25% + 50% Supplements!"
πΉ "One-Piece Round Wire is the Key Construction Feature!"
π Pro Tip:
If you are exporting to the US, the 75% duty is a major barrier.
1. Verify Origin: Ensure no non-originating components violate rules.
2. Check Exclusions: Are there any valid Section 301 exclusions for your specific nail type?
3. Consider Alternatives: Can you ship to EU/UK where tariffs are ~2.7%?
4. Pre-Arbitration: If the value is high, consider Advance Rulings to confirm the 75% calculation before shipping.
π£ Take Action:
π Contact a Licensed Customs Broker
π Provide Collated Samples & Photos
π Confirm the 75% Duty Budget Before You Ship!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your Every Dollar is Worth Counting!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.