Plastic Wall Sound Insulation Material (Textile)
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 5903102010 | 35.0% | CN | US | Official Doc |
| 5903102090 | 35.0% | CN | US | Official Doc |
| 3925900000 | 40.3% | CN | US | Official Doc |
| 3925305000 | 22.8% | CN | US | Official Doc |
| 5903102010 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π§ Plastic Wall Sound Insulation Material (Textile)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: What Exactly is this Material?
Plastic Wall Sound Insulation Material (Textile) refers to composite building materials specifically designed for acoustic treatment. These materials combine the durability and moisture resistance of plastics with the structural integrity and aesthetic finish of textiles. In international trade, they are classified based on their primary composition and function.
The key distinction lies in whether the fabric is merely impregnated/coated with plastic (Chapter 59) or if it is considered a finished plastic construction component (Chapter 39).
β οΈ Key Classification Point:
- If the textile is the base material and is impregnated, coated, or covered with plastic β Classified under 5903.10.20.xx
- If the item is considered a finished plastic building part (rigid panels, accessories) with textile surface or core β Classified under 3925.xx.xx.xx
π¦ II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
| HS Code | Product Description | Application Scenario | Classification Logic |
|---|---|---|---|
5903.10.20.10 |
Plastic-impregnated textile fabrics, specifically for wall sound insulation | Composite soundproof panels, acoustic wall covers | β Textile Base + Plastic Impregnation |
5903.10.20.90 |
Other textiles impregnated, coated, or laminated with plastics, for wall sound insulation | Generic plastic-textile acoustic composites | β Textile Base + Plastic Coating/Lamination |
3925.90.00.00 |
Plastic building components, for wall sound insulation, made primarily of plastic | Rigid plastic acoustic panels, composite insulation blocks | β Plastic Component |
3925.30.50.00 |
Plastic building accessories, for wall sound insulation, classified as other building accessories | Plastic clips, frames, or acoustic trim pieces | β Plastic Accessory |
π Important Note:
- Items described as "Plastic and Textile Combination" for wall insulation where the fabric structure remains dominant but is impregnated with plastic fall under 5903.10.20.10.
- If the product is a rigid plastic component used for construction (even if it has acoustic properties), it falls under 3925.90.00.00.
- Do not mix classifications: A single shipment must be declared accurately. Mixing a rigid plastic panel (3925) with a soft textile fabric (5903) in one line item can lead to customs rejection or reclassification penalties.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Time: Post-November 2025 (Current Active Rates)
π― 1. 5903.10.20.10 & 5903.10.20.90 ββ Plastic-Impregnated Textile Fabrics
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Effective Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35% |
| De Minimis Exemption Eligibility | β No (Deny de_minimis) |
| Legal Basis Path | USITC:5903.10.20.10/90 β FOOTNOTE:301.88.01 (+25%) β IEEPA:9903.01.24 (+10%) |
π Explanation:
- Although the base duty is 0%, the 25% Section 301 tariff (ιε―ΉδΈε½εΆι οΌ significantly increases the cost. - The additional 10% IEEPA tariff (under Section 122 or similar emergency powers) applies to Chinese-origin goods. - Total: 35%. This is a high-cost category for textile-plastic composites from China.
π― 2. 3925.90.00.00 ββ Plastic Building Components
| Item | Content |
|---|---|
| Base Tariff Rate | 5.3% |
| USITC Surtax (Section 301) | +25.0% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Effective Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Exemption Eligibility | β No (Deny de_minimis) |
| Legal Basis Path | USITC:3925.90.00.00 β FOOTNOTE:301.88.01 (+25%) β IEEPA:9903.01.24 (+10%) |
π Explanation:
- This rate is higher than the textile-composite rate (40.3% vs 35.0%). - Classification as a "plastic building component" attracts the full base duty plus surcharges. - Strategy Tip: If the product can be legally classified as "plastic-impregnated textile" (5903), it may save 5.3% in base duties compared to classifying it as a pure plastic component (3925).
π― 3. 3925.30.50.00 ββ Plastic Building Accessories
| Item | Content |
|---|---|
| Base Tariff Rate | 5.3% |
| USITC Surtax (Section 301) | +7.5% |
| IEEPA Surcharge (Section 122) | +10.0% |
| Total Effective Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Exemption Eligibility | β No (Deny de_minimis) |
| Legal Basis Path | USITC:3925.30.50.00 β FOOTNOTE:301.88.01 (Partial/Reduced 7.5%) β IEEPA:9903.01.24 (+10%) |
π Explanation:
- Lowest Total Rate: 22.8%. - This classification applies if the item is strictly a plastic accessory (e.g., a clip, frame, or mount) rather than the main insulation panel itself. - Warning: Do not misclassify the main insulation board as an "accessory" to save taxes. Customs will reclassify it, leading to penalties.
π οΈ IV. Customs Clearance Practical Advice (Combat Avoidance Guide)
β 1. Preparation Checklist (All Required)
| Document | Required | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail composition: e.g., "60% Polyester Textile, 40% PVC Coating" |
| β Composition Breakdown | βοΈ | Crucial for choosing between 5903 (Textile base) and 3925 (Plastic component) |
| β Product Photos | βοΈ | Show cross-section to prove it is an impregnated fabric, not a solid plastic block |
| β Commercial Invoice | βοΈ | Clearly state "Plastic-Impregnated Textile for Sound Insulation" |
| β Certificate of Origin | βοΈ | Required for determining surtax applicability |
β 2. Declaration Strategy (Key Mantra)
π₯ βMaterial Dictates Code: Fabric Base = 35%, Plastic Part = 40.3%, Accessory = 22.8%β
| Scenario | Correct HS Code | Risk of Wrong Declaration |
|---|---|---|
| Soft, flexible sheet, textile visible, plastic coated | 5903.10.20.10 or 5903.10.20.90 |
If declared as plastic β 40.3% (Overpay) |
| Rigid plastic panel, used for wall insulation | 3925.90.00.00 |
If declared as textile β 35% (Underpay, Penalty Risk) |
| Plastic clip/frame for hanging insulation | 3925.30.50.00 |
If declared with main panel β 35% (Wrong, separate entry needed) |
β 3. Special Handling Tips
| Situation | Recommendation |
|---|---|
| Composite Material | Provide a cross-section diagram proving the textile is the structural base and plastic is the impregnating agent. This supports the 5903 classification. |
| "Plastic and Textile Combination" | If the description is vague, customs may default to the higher duty or the "principal character" rule. Be specific in the description. |
| Avoiding Misclassification | Do not use generic terms like "Wall Panel." Use precise terms: "Impregnated Textile Fabric" or "Plastic Building Component." |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 5903.10.20.10 |
35.0% | High due to 25% + 10% surtaxes |
| πΊπΈ USA | 3925.90.00.00 |
40.3% | Higher base duty makes it less attractive |
| π¨π³ China | 5903.10.20.10 |
5-10% (Varies) | Export duty may apply, but lower than US import |
| πͺπΊ EU | 5903.10.00 |
6.5% | No Section 301/IEEPA style surtaxes |
| π¦πΊ Australia | 5903.10.20 |
5-10% | Lower than US, but check local ACMA for acoustic certifications |
π Conclusion:
- The US market is the most expensive due to layered surtaxes. - For US imports,5903.10.20.10(35%) is more favorable than3925.90.00.00(40.3%) if the product is structurally a textile-based impregnated fabric. - Always verify if the product can be classified as an accessory (3925.30.50.00) if it is not the main insulation board, as it has the lowest rate (22.8%).
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring a rigid plastic acoustic panel as "Textile"
π Consequence: Customs reclassifies to 3925.90.00.00 (40.3%) β Back taxes + Penalties!
β Error 2: Using "Wall Panel" without specifying material
π Consequence: Customs assigns the highest possible rate or demands additional documentation β Clearance Delay!
β Error 3: Ignoring the 122/IEEPA surtax
π Consequence: Underestimating landed cost by 10% β Profit Margin Erosion!
β Correct Declaration Example:
"Plastic-Impregnated Polyester Textile Fabric for Wall Sound Insulation, Soft/Flexible, HS 5903.10.20.10, Made in China"
π― VII. Conclusion: Precision in Classification Saves Money!
π― Remember the Rule:
πΉ Fabric Base + Plastic Coat = 35% (
5903.10.20.10/90)
πΉ Rigid Plastic Part = 40.3% (3925.90.00.00)
πΉ Plastic Accessory = 22.8% (3925.30.50.00)
π Pro Tip:
If you have a mixed shipment of insulation boards and plastic clips, separate them in the invoice. Declaring the clips as part of the board may force the entire shipment into the higher plastic component rate.
π£ Immediate Action:
π Contact your customs broker with product photos and material composition.
π Request an Advance Ruling if the classification is ambiguous.
π Optimize your HS Code to avoid overpaying 5.3% or facing compliance risks!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your cost efficiency depends on the first line of your invoice.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.