Wing Coaster Mold
CN โ US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9602005080 | 20.2% | CN | US | Official Doc |
| 8480718060 | 38.1% | CN | US | Official Doc |
| 8480718045 | 38.1% | CN | US | Official Doc |
Product Images
AI Analysis
๐ข Wing Coaster Mold (Attraction Engineering & Manufacturing)
๐ HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
๐ I. Product Definition & Classification: What is a "Wing Coaster Mold"?
A "Wing Coaster" is a specific type of steel roller coaster manufactured by Vekoma International, characterized by seats positioned on both sides of the track (wing seating). However, in the context of HS Code classification, we are NOT classifying the amusement ride itself (which would fall under Chapter 95). We are classifying the molds, tools, and casting equipment used to manufacture the metal or plastic components (such as the steel track sections, wing seats, or plastic interior parts) of these rides.
โ ๏ธ Critical Distinction:
- If you are importing the actual ride vehicle or track structure โ Chapter 95 (Toys/Amusement) or Chapter 73 (Iron/Steel Structures).
- If you are importing the MOLD used to cast the metal parts or plastic seats โ Chapter 84.
- If you are importing the Scaffolding/Shuttering used to build the ride structure โ Chapter 73.
The data provided in <DATA> specifically covers Molds (8480) and Steel Structural Parts (7308).
๐ฆ ไบใHS Code ๅ็ฑปๆ็ป๏ผ2026ๅนดๆๆฐ็จๅๆๅจๅฏน็ ง๏ผ
Based on the <DATA> provided, here are the relevant HS Codes for components related to Wing Coaster manufacturing and construction.
| HS Code | Product Description | Application in Wing Coaster Manufacturing | Tax Status (Total) |
|---|---|---|---|
8480.71.80.60 |
Molds for rubber or plastics: Injection or compression types: Compression type | Used to manufacture plastic wing seats, handlebars, or interior trim pieces. | 0.0% |
8480.79.90.10 |
Molds for rubber or plastics: Other types: Blow molds | Likely used for manufacturing hollow plastic components (e.g., certain body panels or hollow frames). | 0.0% |
7308.40.00.00 |
Equipment for scaffolding, shuttering, propping or pit-propping (of iron/steel) | Construction Phase: Used to build the support structures (towers, beams) during the erection of the coaster. | 75.0% |
7308.90.95.90 |
Other structures and parts of structures of iron/steel | Structural Phase: Steel supports, beams, and framework components prepared for use in the rideโs support system. | 75.0% |
8477.20 |
Molds for the production of plastic articles | General Plastic Molds: For manufacturing non-specific plastic parts for the coaster. | Error (Retrieval Failed) |
8477.30 |
Molds for the production of articles of metal or other materials | Metal Molds: For casting or stamping metal components of the coaster (e.g., brackets, hinges). | Error (Retrieval Failed) |
๐ Key Insight:
- Molds (8480) are essential for the assembly line production of plastic parts (seats).
- Steel Structures (7308) are critical for the on-site construction of the ride.
- Note: The<DATA>indicates 75.0% total tax for steel structural items, which is extremely high due to combined basic (0%) and additional tariffs (25% steel + 50% special).
๐ฐ ไธใ2026ๅนดๆๆฐๅ ณ็จ็จ็่ฏฆ่งฃ๏ผๅซ้ๅ ็จใๆฟ็ญ้ๅ ๏ผ
โ Applicable Countries: United States (US)
โ Origin: China (CN)
โ Effective Time: Post-November 2025 (based on data annotations)
๐ฏ 1. 8480.71.80.60 & 8480.79.90.10 โโ Molds for Rubber or Plastics
| Item | Details |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | "ๅบ็กๅ ณ็จ: 0.0%, ๅ ๅพๅ ณ็จ: 0.0%" |
| Legal Basis | Standard HTSUSA classification for plastic/rubber molds |
๐ Explanation:
- Molds for manufacturing plastic seats (compression or blow molds) are currently exempt from the heavy additional tariffs applied to steel or certain industrial goods.
- This makes importing molding equipment for plastic coaster components highly cost-effective.
๐ฏ 2. 7308.40.00.00 & 7308.90.95.90 โโ Steel Structures & Scaffolding
| Item | Details |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | +25.0% (Steel/Aluminum/Copper Products) |
| Special Additional Tariff | +50.0% (Specific to Steel, Aluminum, Copper products under new rules) |
| Total Tax Rate | 75.0% |
| Tax Detail | "ๅบ็กๅ ณ็จ: 0.0%, ๅ ๅพๅ ณ็จ: 25.0%้ข,้้ๅถๅๅ ๅพๅ ณ็จ: 50%" |
| Legal Basis | USITC Footnotes for Steel/Aluminum/Copper + IEEPA provisions |
๐ Critical Warning:
- 75% is a devastatingly high tariff. This applies to steel structural parts and scaffolding/shuttering used in construction.
- If your "Wing Coaster Mold" shipment includes steel support beams or construction scaffolding classified under 7308, you must budget for 75% duty.
- Do NOT misdeclare steel parts as "molds" (8480) to avoid this. Customs will inspect the material and intent.
โ ๏ธ Note on 8477.20 & 8477.30
| Item | Status |
|---|---|
| 8477.20 (Plastic Molds) | Tax Retrieval Failed |
| 8477.30 (Metal Molds) | Tax Retrieval Failed |
๐ Advice:
- Since tax data is unavailable in<DATA>, you must consult the latest USITC tariff schedule or request a Pre-Ruling from US Customs and Border Protection (CBP).
- Generally, molds for plastics (8477.20) often have low or 0% duty, while molds for metals (8477.30) may vary. Assume risk until confirmed.
๐ ๏ธ ๅใๆธ ๅ ณๅฎๆๅปบ่ฎฎ๏ผๅฎๆ้ฟๅๆๅ๏ผ
โ 1. Preparation Checklist (Must-Have Documents)
| Document | Required? | Purpose |
|---|---|---|
| Product Specifications | โ Yes | Clearly state: "Mold for Plastic Seats, NOT for Coaster Structure." |
| Material Declaration | โ Yes | Specify if the mold is for Plastic (8480/8477) or Metal (8477.30). |
| Photos of Molds | โ Yes | Show cavities, ejection systems, and material (steel/aluminum). |
| Commercial Invoice | โ Yes | Use precise description: "Compression Mold for Plastic Wing Seats." |
| Origin Certificate | โ Yes | Crucial for steel items to verify country of origin for tariff calculations. |
| Construction Plans | โ ๏ธ Conditional | If importing steel structures (7308), provide engineering drawings to prove they are "prepared for use in structures." |
โ 2. Classification Strategy (Key Mnemonics)
๐ฅ "Mold for Plastic = Low Tax; Steel Structure = High Tax!"
| Scenario | Correct HS Code | Tax Rate | Common Mistake |
|---|---|---|---|
| Plastic Seat Molds | 8480.71.80.60 or 8480.79.90.10 |
0.0% | Misclassifying as general machinery (high tax) |
| Steel Support Beams | 7308.90.95.90 |
75.0% | Misclassifying as "parts of amusement rides" (Ch 95, lower tax) โ Illegal |
| Scaffolding for Construction | 7308.40.00.00 |
75.0% | Declaring as "temporary tools" without proper code |
| Metal Part Molds | 8477.30 |
Unknown (Check CBP) | Assuming 0% like plastic molds |
โ 3. Special Circumstances
| Situation | Handling Advice |
|---|---|
| Mixed Shipment | Separate plastic molds (0%) from steel structures (75%) on different lines of the invoice. |
| OEM Molds for Vekoma | If the mold is customized for Vekoma, provide the design specification sheet to prove it is a mold, not a ride part. |
| Steel "Molds" (Die-Cast) | If the mold is used for metal casting, it falls under 8477.30 or 8480.1x (not in DATA). Tax risk is high. Consult CBP. |
| Construction Equipment | Scaffolding and shuttering are steel structures. Do not attempt to reclassify as "equipment" to avoid the 75% tariff. |
๐ ไบใๅ จ็ไธป่ฆๅธๅบๆธ ๅ ณๅฏนๆฏ๏ผ2026ๅนดๆๆฐ๏ผ
| Country/Region | Recommended HS Code | Tariff (China Origin) | Remarks |
|---|---|---|---|
| ๐บ๐ธ USA | 8480.71.80.60 |
0.0% | Plastic molds are tax-free. Steel structures: 75.0%. |
| ๐จ๐ณ China | 8480.71.80.60 |
0.0% | Import duty for molds is generally low. |
| ๐ช๐บ EU | 8480.71 |
0.0% | Molds for plastics often have 0% duty under GSP or MFN. |
| ๐ฏ๐ต Japan | 8480.71 |
0.0% ~ 3.0% | Generally low tariff for industrial molds. |
๐ Conclusion:
- USA is the most punitive market for steel structural items (75%).
- Plastic molds (8480) remain tax-friendly globally.
- Steel molds (8477.30) are unclear in DATA; assume high risk in the US.
๐ ๅ ญใๅธธ่ง้่ฏฏ & ้ฟๅๆๅ๏ผ่กๆณชๆ่ฎญ๏ผ
โ Error 1: Declaring Steel Support Beams as "Parts of Amusement Rides" (Ch 95)
๐ Consequence: Customs will reject based on Chapter 73 exclusions. Penalty + 75% duty + fines.
โ Error 2: Mixing Plastic Molds and Steel Structures in one HS Code
๐ Consequence: Audit trigger. If one item is 75% tax, the entire shipment may be scrutinized.
โ Error 3: Assuming 8477.30 (Metal Molds) has 0% tax
๐ Consequence: Tax retrieval failed in DATA. If itโs 6.5% or 0%, you donโt know. Apply for Pre-Ruling.
โ Error 4: Calling Scaffolding "Construction Tools"
๐ Consequence: Scaffolding is explicitly 7308.40.00.00 with 75% tax. No exemption for "tools."
โ Correct Approach:
"Compression Molds for Plastic Wing Seats, Model XYZ, 100% Steel Mold Body, for Plastic Injection/Compression."
"Steel Structural Beams for Ride Support, Prepared for Erection, NOT for Retail Use."
๐ฏ ไธใConclusion: Professional Clearance, Cost Efficiency!
๐ฏ Remember the Mantra:
๐น "Plastic Molds = 0% (Safe)!"
๐น "Steel Structures = 75% (Danger)!"
๐น "Metal Molds = Check First!"
๐ Pro Tip:
If you are shipping large steel structures (beams, towers) for the Wing Coaster, consider:
1. Dismantling and declaring as "parts" if possible (still 75% if steel).
2. Local Sourcing in the US to avoid 75% import duty.
3. Pre-Ruling for 8477.30 to confirm tax status.
๐ฃ Immediate Action:
๐ Contact a US Customs Broker with your Technical Drawings.
๐ Separate Plastic Molds from Steel Structures in your shipment to minimize tax impact.
โจ Precise Classification Saves 75% in Duty!
๐ผ Donโt let 75% tariff eat your profit margin!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) โ Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) โ More specific grouping within the chapter
- Subheading (6 digits) โ Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) โ Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate โ The standard duty rate applied to WTO members
- General rate โ Applied to countries without trade agreements
- Trade remedy duties โ Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.